宅田 裕彦

最終更新日時: 2020/07/29 10:47:27

印刷する

氏名(漢字/フリガナ/アルファベット表記)
宅田 裕彦/タクダ ヒロヒコ/Takuda, Hirohiko
所属部署・職名(部局/所属/講座等/職名)
エネルギー科学研究科/エネルギー応用科学専攻資源エネルギー学講座/教授
学部兼担
部局 所属 講座等 職名
工学部 工学部 地球工学
所属学会(国内)
学会名(日本語) 学会名(英語)
日本塑性加工学会 The Japan Society for Technology of Plasticity
日本鉄鋼協会 The Iron and Steel Institute of Japan
軽金属学会 Japan Institute of Light Metals
取得学位
学位名(日本語) 学位名(英語) 大学(日本語) 大学(英語) 取得区分
工学修士 京都大学
工学博士 京都大学
職歴
期間 組織名(日本語) 組織名(英語) 職名(日本語) 職名(英語)
使用言語
言語名(japanese) 言語名(english) コード
英語 English eng
ドイツ語 German deu
researchmap URL
https://researchmap.jp/read0012857
研究テーマ
(日本語)
鉄鋼製造プロセスにおける省資源、省エネルギー、高精度化、自動車の軽量化(軽量板材の成形性向上および成形限界予測法の確立)、高温固体金属の水冷却機構の解明および最適化などの研究テーマに関する研究成果による社会への貢献
論文
著者 著者(日本語) 著者(英語) タイトル タイトル(日本語) タイトル(英語) 書誌情報等 書誌情報等(日本語) 書誌情報等(英語) 出版年月 査読の有無 記述言語 掲載種別 公開
Baudoin, P, Hama, T, Takuda, H Baudoin, P, Hama, T, Takuda, H Baudoin, P, Hama, T, Takuda, H Influence of critical resolved shear stress ratios on the response of a commercially pure titanium oligocrystal: crystal plasticity simulations and experiment Influence of critical resolved shear stress ratios on the response of a commercially pure titanium oligocrystal: crystal plasticity simulations and experiment Influence of critical resolved shear stress ratios on the response of a commercially pure titanium oligocrystal: crystal plasticity simulations and experiment International Journal of Plasticity, 115, 111-131 International Journal of Plasticity, 115, 111-131 International Journal of Plasticity, 115, 111-131 2019 英語 公開
久保雅寛, 中澤善明, 浜孝之, 宅田裕彦 久保雅寛, 中澤善明, 浜孝之, 宅田裕彦 {001} 結晶方位低減による極低炭素鋼板の耐表面荒れ性の向上 {001} 結晶方位低減による極低炭素鋼板の耐表面荒れ性の向上 鉄と鋼, 104, 9, 501-508 鉄と鋼, 104, 9, 501-508 , 104, 9, 501-508 2018/09 日本語 研究論文(学術雑誌) 公開
Kubo, M, Hama, T, Tsunemi, Y, Nakazawa, Y, Takuda, H Kubo, M, Hama, T, Tsunemi, Y, Nakazawa, Y, Takuda, H Influence of strain ratio on surface roughening in biaxial stetching of IF steel sheets Influence of strain ratio on surface roughening in biaxial stetching of IF steel sheets ISIJ International, 58, 4, 704-713 ISIJ International, 58, 4, 704-713 , 58, 4, 704-713 2018/04 英語 研究論文(学術雑誌) 公開
Fujimoto, H, Sakane, S, Hama, T, Takuda, H Fujimoto, H, Sakane, S, Hama, T, Takuda, H Fujimoto, H, Sakane, S, Hama, T, Takuda, H Transient contact behavior of aqueous polymer solution droplets with transparent hot solid Transient contact behavior of aqueous polymer solution droplets with transparent hot solid Transient contact behavior of aqueous polymer solution droplets with transparent hot solid Experimental Thermal and Fluid Scence, 96, 1-10 Experimental Thermal and Fluid Scence, 96, 1-10 Experimental Thermal and Fluid Scence, 96, 1-10 2018 英語 研究論文(学術雑誌) 公開
Hama, T, Suzuki, T, Hatakeyama, S, Fujimoto, H, Takuda, H Hama, T, Suzuki, T, Hatakeyama, S, Fujimoto, H, Takuda, H Hama, T, Suzuki, T, Hatakeyama, S, Fujimoto, H, Takuda, H Role of twinning on the stress and strain behaviors during reverse loading in rolled magnesium alloy sheets Role of twinning on the stress and strain behaviors during reverse loading in rolled magnesium alloy sheets Role of twinning on the stress and strain behaviors during reverse loading in rolled magnesium alloy sheets Materials Science & Engineering A, 725, 8-18 Materials Science & Engineering A, 725, 8-18 Materials Science & Engineering A, 725, 8-18 2018 英語 研究論文(学術雑誌) 公開
Morisawa, K, Nakahara, J, Nagata, K, Fujimoto, H, Hama, T, Takuda, H Morisawa, K, Nakahara, J, Nagata, K, Fujimoto, H, Hama, T, Takuda, H Morisawa, K, Nakahara, J, Nagata, K, Fujimoto, H, Hama, T, Takuda, H Boiling heat transfer characteristics of vertical water jet impinging on horizontally moving hot plate Boiling heat transfer characteristics of vertical water jet impinging on horizontally moving hot plate Boiling heat transfer characteristics of vertical water jet impinging on horizontally moving hot plate ISIJ International, 58, 1, 140-145 ISIJ International, 58, 1, 140-145 ISIJ International, 58, 1, 140-145 2018/01 英語 研究論文(学術雑誌) 公開
Hitoshi Fujimoto, Wataru Obana, Masayoshi Ashida, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Wataru Obana, Masayoshi Ashida, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Wataru Obana, Masayoshi Ashida, Takayuki Hama, Hirohiko Takuda Hydrodynamics and heat transfer characteristics of oil-in-water emulsion droplets impinging on hot stainless steel foil Hydrodynamics and heat transfer characteristics of oil-in-water emulsion droplets impinging on hot stainless steel foil Hydrodynamics and heat transfer characteristics of oil-in-water emulsion droplets impinging on hot stainless steel foil EXPERIMENTAL THERMAL AND FLUID SCIENCE, 85, 201-212 EXPERIMENTAL THERMAL AND FLUID SCIENCE, 85, 201-212 EXPERIMENTAL THERMAL AND FLUID SCIENCE, 85, 201-212 2017/07 英語 研究論文(学術雑誌) 公開
西村隆一, 中澤嘉明, 浜孝之, 宅田裕彦 西村隆一, 中澤嘉明, 浜孝之, 宅田裕彦 曲げ挙動制御によるフランジアップ成形性の向上 曲げ挙動制御によるフランジアップ成形性の向上 塑性と加工, 58, 675, 304-310 塑性と加工, 58, 675, 304-310 , 58, 675, 304-310 2017/04 日本語 研究論文(学術雑誌) 公開
Takayuki Hama, Akihiro Kobuki, Hirohiko Takuda Takayuki Hama, Akihiro Kobuki, Hirohiko Takuda Takayuki Hama, Akihiro Kobuki, Hirohiko Takuda Crystal-plasticity finite-element analysis of anisotropic deformation behavior in a commercially pure titanium Grade 1 sheet Crystal-plasticity finite-element analysis of anisotropic deformation behavior in a commercially pure titanium Grade 1 sheet Crystal-plasticity finite-element analysis of anisotropic deformation behavior in a commercially pure titanium Grade 1 sheet INTERNATIONAL JOURNAL OF PLASTICITY, 91, 77-108 INTERNATIONAL JOURNAL OF PLASTICITY, 91, 77-108 INTERNATIONAL JOURNAL OF PLASTICITY, 91, 77-108 2017/04 英語 研究論文(学術雑誌) 公開
Hitoshi Fujimoto, Soushi Yoshimoto, Ken Takahashi, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Soushi Yoshimoto, Ken Takahashi, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Soushi Yoshimoto, Ken Takahashi, Takayuki Hama, Hirohiko Takuda Deformation behavior of two droplets successively impinging obliquely on hot solid surface Deformation behavior of two droplets successively impinging obliquely on hot solid surface Deformation behavior of two droplets successively impinging obliquely on hot solid surface EXPERIMENTAL THERMAL AND FLUID SCIENCE, 81, 136-146 EXPERIMENTAL THERMAL AND FLUID SCIENCE, 81, 136-146 EXPERIMENTAL THERMAL AND FLUID SCIENCE, 81, 136-146 2017/02 英語 研究論文(学術雑誌) 公開
Hama, T, Sakai, T, Fujisaki, Y, Fujimoto, H, Takuda, H Hama, T, Sakai, T, Fujisaki, Y, Fujimoto, H, Takuda, H Hama, T, Sakai, T, Fujisaki, Y, Fujimoto, H, Takuda, H Time-dependent springback of a commercially pure titanium sheet Time-dependent springback of a commercially pure titanium sheet Time-dependent springback of a commercially pure titanium sheet Procedia Engineeing, 207, 263-268 Procedia Engineeing, 207, 263-268 Procedia Engineeing, 207, 263-268 2017 英語 研究論文(国際会議プロシーディングス) 公開
Masahiro Kubo, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda Masahiro Kubo, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda Masahiro Kubo, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda Effect of Microstructure on Surface Roughening in Stretch Forming of Steel Sheets Effect of Microstructure on Surface Roughening in Stretch Forming of Steel Sheets Effect of Microstructure on Surface Roughening in Stretch Forming of Steel Sheets ISIJ INTERNATIONAL, 57, 12, 2185-2193 ISIJ INTERNATIONAL, 57, 12, 2185-2193 ISIJ INTERNATIONAL, 57, 12, 2185-2193 2017 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Keisuke Kojima, Masahiro Kubo, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Keisuke Kojima, Masahiro Kubo, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Keisuke Kojima, Masahiro Kubo, Hitoshi Fujimoto, Hirohiko Takuda Crystal Plasticity Finite-element Simulation on Development of Dislocation Structures in BCC Ferritic Single Crystals Crystal Plasticity Finite-element Simulation on Development of Dislocation Structures in BCC Ferritic Single Crystals Crystal Plasticity Finite-element Simulation on Development of Dislocation Structures in BCC Ferritic Single Crystals ISIJ INTERNATIONAL, 57, 5, 866-874 ISIJ INTERNATIONAL, 57, 5, 866-874 ISIJ INTERNATIONAL, 57, 5, 866-874 2017 英語 研究論文(学術雑誌) 公開
窪田紘明, 富澤淳, 岡田信宏, 山本憲司, 浜孝之, 宅田裕彦 窪田紘明, 富澤淳, 岡田信宏, 山本憲司, 浜孝之, 宅田裕彦 3次元熱間曲げ焼入れの成形可能範囲―3次元熱間曲げ焼入れ技術の開発 第2報― 3次元熱間曲げ焼入れの成形可能範囲―3次元熱間曲げ焼入れ技術の開発 第2報― 塑性と加工, 57, 668, 879-885 塑性と加工, 57, 668, 879-885 , 57, 668, 879-885 2016/09 日本語 研究論文(学術雑誌) 公開
Takayuki Hama, Yuhki Tanaka, Masato Uratani, Hirohiko Takuda Takayuki Hama, Yuhki Tanaka, Masato Uratani, Hirohiko Takuda Takayuki Hama, Yuhki Tanaka, Masato Uratani, Hirohiko Takuda Deformation behavior upon two-step loading in a magnesium alloy sheet Deformation behavior upon two-step loading in a magnesium alloy sheet Deformation behavior upon two-step loading in a magnesium alloy sheet INTERNATIONAL JOURNAL OF PLASTICITY, 82, 283-304 INTERNATIONAL JOURNAL OF PLASTICITY, 82, 283-304 INTERNATIONAL JOURNAL OF PLASTICITY, 82, 283-304 2016/07 英語 研究論文(学術雑誌) 公開
Ning Yi, Takayuki Hama, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda Ning Yi, Takayuki Hama, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda Ning Yi, Takayuki Hama, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda Anisotropic deformation behavior under various strain paths in commercially pure titanium Grade 1 and Grade 2 sheets Anisotropic deformation behavior under various strain paths in commercially pure titanium Grade 1 and Grade 2 sheets Anisotropic deformation behavior under various strain paths in commercially pure titanium Grade 1 and Grade 2 sheets MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 655, 70-85 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 655, 70-85 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 655, 70-85 2016/02 英語 研究論文(学術雑誌) 公開
Hitoshi Fujimoto, Naoya Hayashi, Junya Nakahara, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Naoya Hayashi, Junya Nakahara, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Naoya Hayashi, Junya Nakahara, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda Boiling Heat Transfer during Impingement of Two or Three Pipe Laminar Jets onto Moving Steel Sheet Boiling Heat Transfer during Impingement of Two or Three Pipe Laminar Jets onto Moving Steel Sheet Boiling Heat Transfer during Impingement of Two or Three Pipe Laminar Jets onto Moving Steel Sheet ISIJ INTERNATIONAL, 56, 11, 2016-2021 ISIJ INTERNATIONAL, 56, 11, 2016-2021 ISIJ INTERNATIONAL, 56, 11, 2016-2021 2016 英語 研究論文(学術雑誌) 公開
Masahiro Kubo, Yoshiaki Nakazawa, Hiroshi Yoshida, Shigeru Yonemura, Takayuki Hama, Hirohiko Takuda Masahiro Kubo, Yoshiaki Nakazawa, Hiroshi Yoshida, Shigeru Yonemura, Takayuki Hama, Hirohiko Takuda Masahiro Kubo, Yoshiaki Nakazawa, Hiroshi Yoshida, Shigeru Yonemura, Takayuki Hama, Hirohiko Takuda Effect of Microstructure Variation on Differential Hardening Behavior of Steel Sheets under Biaxial Tensile State Effect of Microstructure Variation on Differential Hardening Behavior of Steel Sheets under Biaxial Tensile State Effect of Microstructure Variation on Differential Hardening Behavior of Steel Sheets under Biaxial Tensile State ISIJ INTERNATIONAL, 56, 12, 2259-2266 ISIJ INTERNATIONAL, 56, 12, 2259-2266 ISIJ INTERNATIONAL, 56, 12, 2259-2266 2016 英語 研究論文(学術雑誌) 公開
Masahiro Kubo, Hiroshi Yoshida, Akihiro Uenishi, Seiichi Suzuki, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda Masahiro Kubo, Hiroshi Yoshida, Akihiro Uenishi, Seiichi Suzuki, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda Masahiro Kubo, Hiroshi Yoshida, Akihiro Uenishi, Seiichi Suzuki, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda Development of Biaxial Tensile Test System for In-situ Scanning Electron Microscope and Electron Backscatter Diffraction Analysis Development of Biaxial Tensile Test System for In-situ Scanning Electron Microscope and Electron Backscatter Diffraction Analysis Development of Biaxial Tensile Test System for In-situ Scanning Electron Microscope and Electron Backscatter Diffraction Analysis ISIJ INTERNATIONAL, 56, 4, 669-677 ISIJ INTERNATIONAL, 56, 4, 669-677 ISIJ INTERNATIONAL, 56, 4, 669-677 2016 英語 研究論文(学術雑誌) 公開
T. Hama, T. Mayama, H. Takuda T. Hama, T. Mayama, H. Takuda Deformation behavior of a magnesium alloy sheet with rondom crystallographic orientations under various loading paths Deformation behavior of a magnesium alloy sheet with rondom crystallographic orientations under various loading paths Deformation behavior of a magnesium alloy sheet with rondom crystallographic orientations under various loading paths The Romanian Journal of Technical Sciences - Applied Mechanics, 60, 1-16 The Romanian Journal of Technical Sciences - Applied Mechanics, 60, 1-16 The Romanian Journal of Technical Sciences - Applied Mechanics, 60, 1-16 2015 英語 研究論文(学術雑誌) 公開
Hitoshi Fujimoto, Yamato Shiramasa, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Yamato Shiramasa, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Yamato Shiramasa, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda Heat Transfer Characteristics of a Pipe-laminar Jet Impinging on a Moving Hot Solid Heat Transfer Characteristics of a Pipe-laminar Jet Impinging on a Moving Hot Solid Heat Transfer Characteristics of a Pipe-laminar Jet Impinging on a Moving Hot Solid ISIJ INTERNATIONAL, 55, 9, 1994-2001 ISIJ INTERNATIONAL, 55, 9, 1994-2001 ISIJ INTERNATIONAL, 55, 9, 1994-2001 2015 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Ryogo Matsudai, Yota Kuchinomachi, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Ryogo Matsudai, Yota Kuchinomachi, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Ryogo Matsudai, Yota Kuchinomachi, Hitoshi Fujimoto, Hirohiko Takuda Non-linear Deformation Behavior during Unloading in Various Metal Sheets Non-linear Deformation Behavior during Unloading in Various Metal Sheets Non-linear Deformation Behavior during Unloading in Various Metal Sheets ISIJ INTERNATIONAL, 55, 5, 1067-1075 ISIJ INTERNATIONAL, 55, 5, 1067-1075 ISIJ INTERNATIONAL, 55, 5, 1067-1075 2015 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Hirotaka Nagao, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Hirotaka Nagao, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Hirotaka Nagao, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 620, 390-398 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 620, 390-398 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 620, 390-398 2015/01 英語 研究論文(学術雑誌) 公開
Hitoshi Fujimoto, Shohei Watanabe, Takahiko Okamoto, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Shohei Watanabe, Takahiko Okamoto, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Shohei Watanabe, Takahiko Okamoto, Takayuki Hama, Hirohiko Takuda Photographic study of hydrodynamics of drops of aqueous polymer solution impinging on hot solid Photographic study of hydrodynamics of drops of aqueous polymer solution impinging on hot solid Photographic study of hydrodynamics of drops of aqueous polymer solution impinging on hot solid EXPERIMENTAL THERMAL AND FLUID SCIENCE, 60, 66-74 EXPERIMENTAL THERMAL AND FLUID SCIENCE, 60, 66-74 EXPERIMENTAL THERMAL AND FLUID SCIENCE, 60, 66-74 2015/01 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Hirotaka Nagao, Yota Kuchinomachi, Hirohiko Takuda Takayuki Hama, Hirotaka Nagao, Yota Kuchinomachi, Hirohiko Takuda Takayuki Hama, Hirotaka Nagao, Yota Kuchinomachi, Hirohiko Takuda Effect of pre-strain on work-hardening behavior of magnesium alloy sheets upon cyclic loading Effect of pre-strain on work-hardening behavior of magnesium alloy sheets upon cyclic loading Effect of pre-strain on work-hardening behavior of magnesium alloy sheets upon cyclic loading MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 591, 69-77 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 591, 69-77 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 591, 69-77 2014/01 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Tsuyoshi Mayama, Hirohiko Takuda Takayuki Hama, Tsuyoshi Mayama, Hirohiko Takuda Takayuki Hama, Tsuyoshi Mayama, Hirohiko Takuda Deformation Behavior of a Magnesium Alloy Sheet with random crystallographic orientations Deformation Behavior of a Magnesium Alloy Sheet with random crystallographic orientations Deformation Behavior of a Magnesium Alloy Sheet with random crystallographic orientations MATERIAL FORMING ESAFORM 2014, 611-612, 27-32 MATERIAL FORMING ESAFORM 2014, 611-612, 27-32 MATERIAL FORMING ESAFORM 2014, 611-612, 27-32 2014 英語 研究論文(国際会議プロシーディングス) 公開
Takayuki Hama, Hirohiko Takuda Takayuki Hama, Hirohiko Takuda Takayuki Hama, Hirohiko Takuda Work-hardening behavior upon reverse loading in a rolled AZ31 magnesium alloy sheet Work-hardening behavior upon reverse loading in a rolled AZ31 magnesium alloy sheet Work-hardening behavior upon reverse loading in a rolled AZ31 magnesium alloy sheet Key Engineering Materials, 622-623, 603-608 Key Engineering Materials, 622-623, 603-608 Key Engineering Materials, 622-623, 603-608 2014/01/01 公開
Hitoshi Fujimoto, Katsutoshi Tatebe, Yamato Shiramasa, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Katsutoshi Tatebe, Yamato Shiramasa, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Katsutoshi Tatebe, Yamato Shiramasa, Takayuki Hama, Hirohiko Takuda Heat Transfer Characteristics of a Circular Water Jet Impinging on a Moving Hot Solid Heat Transfer Characteristics of a Circular Water Jet Impinging on a Moving Hot Solid Heat Transfer Characteristics of a Circular Water Jet Impinging on a Moving Hot Solid ISIJ INTERNATIONAL, 54, 6, 1338-1345 ISIJ INTERNATIONAL, 54, 6, 1338-1345 ISIJ INTERNATIONAL, 54, 6, 1338-1345 2014 英語 研究論文(学術雑誌) 公開
Hiroaki Kubota, Atsushi Tomizawa, Kenji Yamamoto, Nobuhiro Okada, Takayuki Hama, Hirohiko Takuda Hiroaki Kubota, Atsushi Tomizawa, Kenji Yamamoto, Nobuhiro Okada, Takayuki Hama, Hirohiko Takuda Hiroaki Kubota, Atsushi Tomizawa, Kenji Yamamoto, Nobuhiro Okada, Takayuki Hama, Hirohiko Takuda Finite Element Analysis of Three-Dimensional Hot Bending and Direct Quench Process Considering Phase Transformation and Temperature Distribution by Induction Heating Finite Element Analysis of Three-Dimensional Hot Bending and Direct Quench Process Considering Phase Transformation and Temperature Distribution by Induction Heating Finite Element Analysis of Three-Dimensional Hot Bending and Direct Quench Process Considering Phase Transformation and Temperature Distribution by Induction Heating ISIJ INTERNATIONAL, 54, 8, 1856-1865 ISIJ INTERNATIONAL, 54, 8, 1856-1865 ISIJ INTERNATIONAL, 54, 8, 1856-1865 2014 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Naoya Kitamura, Hirohiko Takuda Takayuki Hama, Naoya Kitamura, Hirohiko Takuda Takayuki Hama, Naoya Kitamura, Hirohiko Takuda Effect of twinning and detwinning on inelastic behavior during unloading in a magnesium alloy sheet Effect of twinning and detwinning on inelastic behavior during unloading in a magnesium alloy sheet Effect of twinning and detwinning on inelastic behavior during unloading in a magnesium alloy sheet MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 583, 232-241 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 583, 232-241 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 583, 232-241 2013/10 英語 研究論文(学術雑誌) 公開
Hitoshi Fujimoto, Yasuyuki Lee, Ryosuke Kato, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Yasuyuki Lee, Ryosuke Kato, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Yasuyuki Lee, Ryosuke Kato, Takayuki Hama, Hirohiko Takuda Experimental and Numerical Study of Twin Circular Water Jets Impinging on a Moving Thin Film Experimental and Numerical Study of Twin Circular Water Jets Impinging on a Moving Thin Film Experimental and Numerical Study of Twin Circular Water Jets Impinging on a Moving Thin Film ISIJ INTERNATIONAL, 53, 8, 1427-1435 ISIJ INTERNATIONAL, 53, 8, 1427-1435 ISIJ INTERNATIONAL, 53, 8, 1427-1435 2013 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Naoya Kitamura, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Naoya Kitamura, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Naoya Kitamura, Hitoshi Fujimoto, Hirohiko Takuda Crystal Plasticity Finite-Element Simulation of Deformation Behavior during Unloading under Compression in a Magnesium Alloy Sheet Crystal Plasticity Finite-Element Simulation of Deformation Behavior during Unloading under Compression in a Magnesium Alloy Sheet Crystal Plasticity Finite-Element Simulation of Deformation Behavior during Unloading under Compression in a Magnesium Alloy Sheet CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 554-557, 71-76 CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 554-557, 71-76 CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 554-557, 71-76 2013 英語 研究論文(国際会議プロシーディングス) 公開
井口敬之助, 栗山幸久, 師井直紀, 浜孝之, 宅田 裕彦 井口敬之助, 栗山幸久, 師井直紀, 浜孝之, 宅田 裕彦 高強度鋼板の曲げ成形におけるロール形式の影響 高強度鋼板の曲げ成形におけるロール形式の影響 塑性と加工, 54, 628, 436-440 塑性と加工, 54, 628, 436-440 , 54, 628, 436-440 2013 日本語 研究論文(学術雑誌) 公開
井口 敬之助, 栗山 幸久, 師井 直紀, 浜 孝之, 宅田 裕彦 井口 敬之助, 栗山 幸久, 師井 直紀, 浜 孝之, 宅田 裕彦 高張力鋼板のロール成形におけるスプリングバックの検討 : 電縫鋼管のロール成形シミュレーション第1報 高張力鋼板のロール成形におけるスプリングバックの検討 : 電縫鋼管のロール成形シミュレーション第1報 塑性と加工, 53, 622, 1003-1007 塑性と加工, 53, 622, 1003-1007 , 53, 622, 1003-1007 2012/11/25 日本語 公開
Takayuki Hama, Yuhta Kariyazaki, Naohiro Hosokawa, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Yuhta Kariyazaki, Naohiro Hosokawa, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Yuhta Kariyazaki, Naohiro Hosokawa, Hitoshi Fujimoto, Hirohiko Takuda Work-hardening behaviors of magnesium alloy sheet during in-plane cyclic loading Work-hardening behaviors of magnesium alloy sheet during in-plane cyclic loading Work-hardening behaviors of magnesium alloy sheet during in-plane cyclic loading MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 551, 209-217 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 551, 209-217 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 551, 209-217 2012/08 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Toru Kitajima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Toru Kitajima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Toru Kitajima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda Effect of Outflow Volume of Pressure Medium on Fluid-Lubrication Effect during Sheet Hydroforming Effect of Outflow Volume of Pressure Medium on Fluid-Lubrication Effect during Sheet Hydroforming Effect of Outflow Volume of Pressure Medium on Fluid-Lubrication Effect during Sheet Hydroforming MATERIALS TRANSACTIONS, 53, 5, 826-832 MATERIALS TRANSACTIONS, 53, 5, 826-832 MATERIALS TRANSACTIONS, 53, 5, 826-832 2012/05 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Hirohiko Takuda Takayuki Hama, Hirohiko Takuda Takayuki Hama, Hirohiko Takuda Crystal plasticity finite-element simulation of work-hardening behavior in a magnesium alloy sheet under biaxial tension Crystal plasticity finite-element simulation of work-hardening behavior in a magnesium alloy sheet under biaxial tension Crystal plasticity finite-element simulation of work-hardening behavior in a magnesium alloy sheet under biaxial tension COMPUTATIONAL MATERIALS SCIENCE, 51, 1, 156-164 COMPUTATIONAL MATERIALS SCIENCE, 51, 1, 156-164 COMPUTATIONAL MATERIALS SCIENCE, 51, 1, 156-164 2012/01 英語 研究論文(学術雑誌) 公開
Iguchi, K, Kuriyama, Y, Moroi, N, Hama, T, Takuda, H Iguchi, K, Kuriyama, Y, Moroi, N, Hama, T, Takuda, H Iguchi, K, Kuriyama, Y, Moroi, N, Hama, T, Takuda, H Deformation behavior of high strength steel sheet during roll forming of electric resistance welded pipe Deformation behavior of high strength steel sheet during roll forming of electric resistance welded pipe Deformation behavior of high strength steel sheet during roll forming of electric resistance welded pipe Steel Research International, Special Edition, (2012), 927-930. Steel Research International, Special Edition, (2012), 927-930. Steel Research International, Special Edition, (2012), 927-930. 2012 英語 公開
Hama, T, Takuda, H Hama, T, Takuda, H Hama, T, Takuda, H Crystal plasticity finite-element simulation of deformation behavior in a magnesium alloy sheet considering detwinning Crystal plasticity finite-element simulation of deformation behavior in a magnesium alloy sheet considering detwinning Crystal plasticity finite-element simulation of deformation behavior in a magnesium alloy sheet considering detwinning Steel Research International, Special Edition, (2012), 1115-1118. Steel Research International, Special Edition, (2012), 1115-1118. Steel Research International, Special Edition, (2012), 1115-1118. 2012 英語 公開
H. Fujimoto, R. Doi, H. Takuda H. Fujimoto, R. Doi, H. Takuda H. Fujimoto, R. Doi, H. Takuda An experimental study on the oblique collisions of water droplets with a smooth hot solid An experimental study on the oblique collisions of water droplets with a smooth hot solid An experimental study on the oblique collisions of water droplets with a smooth hot solid Journal of Fluids Engineering, Transactions of the ASME, 134, 7 Journal of Fluids Engineering, Transactions of the ASME, 134, 7 Journal of Fluids Engineering, Transactions of the ASME, 134, 7 2012 英語 公開
Takayuki Hama, Hirohiko Takuda Takayuki Hama, Hirohiko Takuda Takayuki Hama, Hirohiko Takuda Crystal-plasticity finite-element analysis of inelastic behavior during unloading in a magnesium alloy sheet Crystal-plasticity finite-element analysis of inelastic behavior during unloading in a magnesium alloy sheet Crystal-plasticity finite-element analysis of inelastic behavior during unloading in a magnesium alloy sheet INTERNATIONAL JOURNAL OF PLASTICITY, 27, 7, 1072-1092 INTERNATIONAL JOURNAL OF PLASTICITY, 27, 7, 1072-1092 INTERNATIONAL JOURNAL OF PLASTICITY, 27, 7, 1072-1092 2011/07 英語 研究論文(学術雑誌) 公開
Hama, T, Ochi, K, Kitamura, N, Fujimoto, H, Takuda, H Hama, T, Ochi, K, Kitamura, N, Fujimoto, H, Takuda, H Hama, T, Ochi, K, Kitamura, N, Fujimoto, H, Takuda, H Unloading behaviour of a magnesium alloy sheet under various loading paths Unloading behaviour of a magnesium alloy sheet under various loading paths Unloading behaviour of a magnesium alloy sheet under various loading paths Steel Research International, (2011), Special Edition, 1054-1059. Steel Research International, (2011), Special Edition, 1054-1059. Steel Research International, (2011), Special Edition, 1054-1059. 2011 英語 公開
Hitoshi Fujimoto, Yuhei Suzuki, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Yuhei Suzuki, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Yuhei Suzuki, Takayuki Hama, Hirohiko Takuda Flow Characteristics of Circular Liquid Jet Impinging on a Moving Surface Covered with a Water Film Flow Characteristics of Circular Liquid Jet Impinging on a Moving Surface Covered with a Water Film Flow Characteristics of Circular Liquid Jet Impinging on a Moving Surface Covered with a Water Film ISIJ INTERNATIONAL, 51, 9, 1497-1505 ISIJ INTERNATIONAL, 51, 9, 1497-1505 ISIJ INTERNATIONAL, 51, 9, 1497-1505 2011 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Eiji Isogai, Tohru Yoshida, Hirohiko Takuda Takayuki Hama, Eiji Isogai, Tohru Yoshida, Hirohiko Takuda Takayuki Hama, Eiji Isogai, Tohru Yoshida, Hirohiko Takuda Experimental Verification of Springback Simulation Using Local Interpolation for Tool Surfaces Experimental Verification of Springback Simulation Using Local Interpolation for Tool Surfaces Experimental Verification of Springback Simulation Using Local Interpolation for Tool Surfaces STEEL RESEARCH INTERNATIONAL, 81, 9, 753-756 STEEL RESEARCH INTERNATIONAL, 81, 9, 753-756 STEEL RESEARCH INTERNATIONAL, 81, 9, 753-756 2010/09 英語 研究論文(学術雑誌) 公開
Keinosuke Iguchi, Kazuki Nishida, Takayuki Hama, Hideyuki Nakamura, Yukihisa Kuriyama, Hirohiko Takuda Keinosuke Iguchi, Kazuki Nishida, Takayuki Hama, Hideyuki Nakamura, Yukihisa Kuriyama, Hirohiko Takuda Keinosuke Iguchi, Kazuki Nishida, Takayuki Hama, Hideyuki Nakamura, Yukihisa Kuriyama, Hirohiko Takuda Finite Element Analysis of Strip Deformation in Roll Forming of Electric Resistance Welded Pipe with Vertical Rolls Finite Element Analysis of Strip Deformation in Roll Forming of Electric Resistance Welded Pipe with Vertical Rolls Finite Element Analysis of Strip Deformation in Roll Forming of Electric Resistance Welded Pipe with Vertical Rolls STEEL RESEARCH INTERNATIONAL, 81, 9, 186-189 STEEL RESEARCH INTERNATIONAL, 81, 9, 186-189 STEEL RESEARCH INTERNATIONAL, 81, 9, 186-189 2010/09 英語 研究論文(学術雑誌) 公開
Hitoshi Fujimoto, Yosuke Oku, Tomohiro Ogihara, Hirohiko Takuda Hitoshi Fujimoto, Yosuke Oku, Tomohiro Ogihara, Hirohiko Takuda Hitoshi Fujimoto, Yosuke Oku, Tomohiro Ogihara, Hirohiko Takuda Hydrodynamics and boiling phenomena of water droplets impinging on hot solid Hydrodynamics and boiling phenomena of water droplets impinging on hot solid Hydrodynamics and boiling phenomena of water droplets impinging on hot solid INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 36, 8, 620-642 INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 36, 8, 620-642 INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 36, 8, 620-642 2010/08 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Yuhta Kariyazaki, Keisuke Ochi, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Yuhta Kariyazaki, Keisuke Ochi, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Yuhta Kariyazaki, Keisuke Ochi, Hitoshi Fujimoto, Hirohiko Takuda Springback Characteristics of Magnesium Alloy Sheet AZ31B in Draw-Bending Springback Characteristics of Magnesium Alloy Sheet AZ31B in Draw-Bending Springback Characteristics of Magnesium Alloy Sheet AZ31B in Draw-Bending MATERIALS TRANSACTIONS, 51, 4, 685-693 MATERIALS TRANSACTIONS, 51, 4, 685-693 MATERIALS TRANSACTIONS, 51, 4, 685-693 2010/04 英語 研究論文(学術雑誌) 公開
Hitoshi Fujimoto, Masahiro Kubo, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Masahiro Kubo, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Masahiro Kubo, Takayuki Hama, Hirohiko Takuda Transport Phenomena of Solid Particles in Pulsatile Pipe Flow Transport Phenomena of Solid Particles in Pulsatile Pipe Flow Transport Phenomena of Solid Particles in Pulsatile Pipe Flow ADVANCES IN MECHANICAL ENGINEERING, 2010 ADVANCES IN MECHANICAL ENGINEERING, 2010 ADVANCES IN MECHANICAL ENGINEERING, 2010 2010 英語 研究論文(学術雑誌) 公開
H. Fujimoto, Y. Oku, T. Ogihara, T. Hama, H. Takuda H. Fujimoto, Y. Oku, T. Ogihara, T. Hama, H. Takuda H. Fujimoto, Y. Oku, T. Ogihara, T. Hama, H. Takuda An experimental study of the deformation behavior of water droplets impinging obliquely on a hot substrate An experimental study of the deformation behavior of water droplets impinging obliquely on a hot substrate An experimental study of the deformation behavior of water droplets impinging obliquely on a hot substrate Journal of Flow Visualization and Image Processing, 17, 2, 113-126 Journal of Flow Visualization and Image Processing, 17, 2, 113-126 Journal of Flow Visualization and Image Processing, 17, 2, 113-126 2010 英語 公開
Kazuya Ibuki, Taichi Umeda, Hitoshi Fujimoto, Hirohiko Takuda Kazuya Ibuki, Taichi Umeda, Hitoshi Fujimoto, Hirohiko Takuda Kazuya Ibuki, Taichi Umeda, Hitoshi Fujimoto, Hirohiko Takuda Heat transfer characteristics of a planar water jet impinging normally or obliquely on a flat surface at relatively low Reynolds numbers Heat transfer characteristics of a planar water jet impinging normally or obliquely on a flat surface at relatively low Reynolds numbers Heat transfer characteristics of a planar water jet impinging normally or obliquely on a flat surface at relatively low Reynolds numbers EXPERIMENTAL THERMAL AND FLUID SCIENCE, 33, 8, 1226-1234 EXPERIMENTAL THERMAL AND FLUID SCIENCE, 33, 8, 1226-1234 EXPERIMENTAL THERMAL AND FLUID SCIENCE, 33, 8, 1226-1234 2009/11 英語 研究論文(学術雑誌) 公開
Hirohiko Takuda, Keisuke Ozawa, Takayuki Hama, Tohru Yoshida, Jun Nitta Hirohiko Takuda, Keisuke Ozawa, Takayuki Hama, Tohru Yoshida, Jun Nitta Hirohiko Takuda, Keisuke Ozawa, Takayuki Hama, Tohru Yoshida, Jun Nitta Forming Limit Prediction in Bore Expansion by Combination of Finite Element Simulation and Ductile Fracture Criterion Forming Limit Prediction in Bore Expansion by Combination of Finite Element Simulation and Ductile Fracture Criterion Forming Limit Prediction in Bore Expansion by Combination of Finite Element Simulation and Ductile Fracture Criterion MATERIALS TRANSACTIONS, 50, 8, 1930-1934 MATERIALS TRANSACTIONS, 50, 8, 1930-1934 MATERIALS TRANSACTIONS, 50, 8, 1930-1934 2009/08 英語 研究論文(学術雑誌) 公開
Hirohiko Takuda, Keisuke Ozawa, Takayuki Hama, Tohru Yoshida, Jun Nitta Hirohiko Takuda, Keisuke Ozawa, Takayuki Hama, Tohru Yoshida, Jun Nitta Hirohiko Takuda, Keisuke Ozawa, Takayuki Hama, Tohru Yoshida, Jun Nitta Forming Limit Prediction in Bore Expansion by Combination of Finite Element Simulation and Ductile Fracture Criterion Forming Limit Prediction in Bore Expansion by Combination of Finite Element Simulation and Ductile Fracture Criterion Forming Limit Prediction in Bore Expansion by Combination of Finite Element Simulation and Ductile Fracture Criterion MATERIALS TRANSACTIONS, 50, 8, 1930-1934 MATERIALS TRANSACTIONS, 50, 8, 1930-1934 MATERIALS TRANSACTIONS, 50, 8, 1930-1934 2009/08 英語 研究論文(学術雑誌) 公開
H. Takuda, K. Tsujikawa, T. Hama, K. Iguchi, H. Hishida H. Takuda, K. Tsujikawa, T. Hama, K. Iguchi, H. Hishida H. Takuda, K. Tsujikawa, T. Hama, K. Iguchi, H. Hishida Finite element simulation of roll forming of seamwelded pipes in initial three stands Finite element simulation of roll forming of seamwelded pipes in initial three stands Finite element simulation of roll forming of seamwelded pipes in initial three stands Computational Plasticity X - Fundamentals and Applications Computational Plasticity X - Fundamentals and Applications Computational Plasticity X - Fundamentals and Applications 2009 英語 公開
Takuda, H, Hama, T, Nishida, K, Yoshida, T, Nitta, J Takuda, H, Hama, T, Nishida, K, Yoshida, T, Nitta, J Takuda, H, Hama, T, Nishida, K, Yoshida, T, Nitta, J Prediction of forming limit in stretch flanging by finite element simulation combined with ductile fracture criterion Prediction of forming limit in stretch flanging by finite element simulation combined with ductile fracture criterion Prediction of forming limit in stretch flanging by finite element simulation combined with ductile fracture criterion Computer Methods in Materials Science, 9-1 (2009), 137-142 Computer Methods in Materials Science, 9-1 (2009), 137-142 Computer Methods in Materials Science, 9-1 (2009), 137-142 2009 公開
Takayuki Hama, Keita Matsushima, Toru Kitajima, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Keita Matsushima, Toru Kitajima, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Keita Matsushima, Toru Kitajima, Hitoshi Fujimoto, Hirohiko Takuda Correlation between Sheet Deformation and Hydraulic Pressure Variation during Sheet Hydroforming Correlation between Sheet Deformation and Hydraulic Pressure Variation during Sheet Hydroforming Correlation between Sheet Deformation and Hydraulic Pressure Variation during Sheet Hydroforming ISIJ INTERNATIONAL, 49, 11, 1736-1743 ISIJ INTERNATIONAL, 49, 11, 1736-1743 ISIJ INTERNATIONAL, 49, 11, 1736-1743 2009 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda Outflow Characteristics of a Pressure Medium during Sheet Hydroforming Outflow Characteristics of a Pressure Medium during Sheet Hydroforming Outflow Characteristics of a Pressure Medium during Sheet Hydroforming ISIJ INTERNATIONAL, 49, 2, 239-246 ISIJ INTERNATIONAL, 49, 2, 239-246 ISIJ INTERNATIONAL, 49, 2, 239-246 2009 英語 研究論文(学術雑誌) 公開
Hitoshi Fujimoto, Albert Y. Tong, Hirohiko Takuda Hitoshi Fujimoto, Albert Y. Tong, Hirohiko Takuda Hitoshi Fujimoto, Albert Y. Tong, Hirohiko Takuda Interaction phenomena of two water droplets successively impacting onto a solid surface Interaction phenomena of two water droplets successively impacting onto a solid surface Interaction phenomena of two water droplets successively impacting onto a solid surface INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 47, 3, 229-236 INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 47, 3, 229-236 INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 47, 3, 229-236 2008/03 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Takashi Nagata, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda Takayuki Hama, Takashi Nagata, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda Takayuki Hama, Takashi Nagata, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 50, 2, 175-192 INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 50, 2, 175-192 INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 50, 2, 175-192 2008/02 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Masato Takamura, Akitake Makinouchi, Cristian Teodosiu, Hirohiko Takuda Takayuki Hama, Masato Takamura, Akitake Makinouchi, Cristian Teodosiu, Hirohiko Takuda Takayuki Hama, Masato Takamura, Akitake Makinouchi, Cristian Teodosiu, Hirohiko Takuda Effect of tool-modeling accuracy on square-cup deep-drawing simulation (Reprinted from JSTP, vol 48, pg 61-65, 2007) Effect of tool-modeling accuracy on square-cup deep-drawing simulation (Reprinted from JSTP, vol 48, pg 61-65, 2007) Effect of tool-modeling accuracy on square-cup deep-drawing simulation (Reprinted from JSTP, vol 48, pg 61-65, 2007) MATERIALS TRANSACTIONS, 49, 2, 278-283 MATERIALS TRANSACTIONS, 49, 2, 278-283 MATERIALS TRANSACTIONS, 49, 2, 278-283 2008/02 英語 公開
Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda Numerical simulation of two droplets impinging successively on a hot solid in the film boiling regime Numerical simulation of two droplets impinging successively on a hot solid in the film boiling regime Numerical simulation of two droplets impinging successively on a hot solid in the film boiling regime ISIJ INTERNATIONAL, 48, 5, 611-615 ISIJ INTERNATIONAL, 48, 5, 611-615 ISIJ INTERNATIONAL, 48, 5, 611-615 2008 英語 研究論文(学術雑誌) 公開
H. Fujimoto, D. Ohno, T. Hama, H. Takuda H. Fujimoto, D. Ohno, T. Hama, H. Takuda H. Fujimoto, D. Ohno, T. Hama, H. Takuda Numerical study of a planar liquid jet impinging on a solid substrate Numerical study of a planar liquid jet impinging on a solid substrate Numerical study of a planar liquid jet impinging on a solid substrate ISIJ International, 48, 5, 603-610 ISIJ International, 48, 5, 603-610 ISIJ International, 48, 5, 603-610 2008 英語 公開
Hirohiko Takuda, Takayuki Hama, Tohru Yoshida, Jun Nitta Hirohiko Takuda, Takayuki Hama, Tohru Yoshida, Jun Nitta Hirohiko Takuda, Takayuki Hama, Tohru Yoshida, Jun Nitta FORMING LIMIT PREDICTION OF HIGH-STRENGTH STEEL SHEETS IN STRETCH FORMING FORMING LIMIT PREDICTION OF HIGH-STRENGTH STEEL SHEETS IN STRETCH FORMING FORMING LIMIT PREDICTION OF HIGH-STRENGTH STEEL SHEETS IN STRETCH FORMING STEEL RESEARCH INTERNATIONAL, 19-23 STEEL RESEARCH INTERNATIONAL, 19-23 STEEL RESEARCH INTERNATIONAL, 19-23 2008 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Keinosuke Iguchi, Hirotoshi Hishida, Hirohiko Takuda Takayuki Hama, Keinosuke Iguchi, Hirotoshi Hishida, Hirohiko Takuda Takayuki Hama, Keinosuke Iguchi, Hirotoshi Hishida, Hirohiko Takuda ROLL FORMING SIMULATIONS OF A STEEL SHEET USING VARIOUS FINITE ELEMENT METHOD CODES ROLL FORMING SIMULATIONS OF A STEEL SHEET USING VARIOUS FINITE ELEMENT METHOD CODES ROLL FORMING SIMULATIONS OF A STEEL SHEET USING VARIOUS FINITE ELEMENT METHOD CODES STEEL RESEARCH INTERNATIONAL, 79, 587-594 STEEL RESEARCH INTERNATIONAL, 79, 587-594 STEEL RESEARCH INTERNATIONAL, 79, 587-594 2008 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Masato Takamura, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda Takayuki Hama, Masato Takamura, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda Takayuki Hama, Masato Takamura, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda Effect of tool modeling accuracy on sheet metal forming simulation Effect of tool modeling accuracy on sheet metal forming simulation Effect of tool modeling accuracy on sheet metal forming simulation Key Engineering Materials, 340-341 I, 743-748 Key Engineering Materials, 340-341 I, 743-748 Key Engineering Materials, 340-341 I, 743-748 2007/04/16 公開
Hitoshi Fujimoto, Yu Shiotani, Albert Y. Tong, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Yu Shiotani, Albert Y. Tong, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Yu Shiotani, Albert Y. Tong, Takayuki Hama, Hirohiko Takuda Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 33, 3, 317-332 INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 33, 3, 317-332 INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 33, 3, 317-332 2007/03 英語 研究論文(学術雑誌) 公開
Takayuki Hama, Tomohiro Hatakeyama, Motoo Asakawa, Hiroyuki Amino, Akitake Makinouchi, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Tomohiro Hatakeyama, Motoo Asakawa, Hiroyuki Amino, Akitake Makinouchi, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Tomohiro Hatakeyama, Motoo Asakawa, Hiroyuki Amino, Akitake Makinouchi, Hitoshi Fujimoto, Hirohiko Takuda Finite-element simulation of the elliptical cup deep drawing process by sheet hydroforming Finite-element simulation of the elliptical cup deep drawing process by sheet hydroforming Finite-element simulation of the elliptical cup deep drawing process by sheet hydroforming FINITE ELEMENTS IN ANALYSIS AND DESIGN, 43, 3, 234-246 FINITE ELEMENTS IN ANALYSIS AND DESIGN, 43, 3, 234-246 FINITE ELEMENTS IN ANALYSIS AND DESIGN, 43, 3, 234-246 2007/01 英語 研究論文(学術雑誌) 公開
Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda Numerical study of the collision dynamics and heat transfer of water droplets impinging on a hot solid Numerical study of the collision dynamics and heat transfer of water droplets impinging on a hot solid Numerical study of the collision dynamics and heat transfer of water droplets impinging on a hot solid ISIJ INTERNATIONAL, 47, 1, 131-137 ISIJ INTERNATIONAL, 47, 1, 131-137 ISIJ INTERNATIONAL, 47, 1, 131-137 2007 英語 研究論文(学術雑誌) 公開
T. Hama, T. Ohkubo, K. Kurisu, H. Fujimoto, H. Takuda T. Hama, T. Ohkubo, K. Kurisu, H. Fujimoto, H. Takuda T. Hama, T. Ohkubo, K. Kurisu, H. Fujimoto, H. Takuda Formability of tube hydroforming under various loading paths Formability of tube hydroforming under various loading paths Formability of tube hydroforming under various loading paths JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 177, 1-3, 676-679 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 177, 1-3, 676-679 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 177, 1-3, 676-679 2006/07 英語 研究論文(学術雑誌) 公開
T. Hama, M. Takamura, A. Makinouchi, C. Teodosiu, H. Takuda T. Hama, M. Takamura, A. Makinouchi, C. Teodosiu, H. Takuda Formulation of contact problems in sheet metal forming simulation using local interpolation for tool surfaces Formulation of contact problems in sheet metal forming simulation using local interpolation for tool surfaces Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 72, 2, 216-223 Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 72, 2, 216-223 , 72, 2, 216-223 2006 日本語 公開
H Fujimoto, T Nagatani, H Takuda H Fujimoto, T Nagatani, H Takuda H Fujimoto, T Nagatani, H Takuda Performance characteristics of a gas-liquid-solid airlift pump Performance characteristics of a gas-liquid-solid airlift pump Performance characteristics of a gas-liquid-solid airlift pump INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 31, 10-11, 1116-1133 INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 31, 10-11, 1116-1133 INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 31, 10-11, 1116-1133 2005/10 英語 研究論文(学術雑誌) 公開
宅田 裕彦, 蟹江 智文, 磯貝 栄志, 吉田 亨 宅田 裕彦, 蟹江 智文, 磯貝 栄志, 吉田 亨 延性破壊条件式を用いた高張力鋼板の成形限界予測(加工・加工熱処理) 延性破壊条件式を用いた高張力鋼板の成形限界予測(加工・加工熱処理) 鐵と鋼 : 日本鐡鋼協會々誌, 91, 6, 553-559 鐵と鋼 : 日本鐡鋼協會々誌, 91, 6, 553-559 , 91, 6, 553-559 2005/06/01 日本語 公開
H Takuda, T Kanie, E Isogai, T Yoshida H Takuda, T Kanie, E Isogai, T Yoshida H Takuda, T Kanie, E Isogai, T Yoshida Finite element analysis of forming limit of high-strength steel sheets using ductile fracture criterion Finite element analysis of forming limit of high-strength steel sheets using ductile fracture criterion Finite element analysis of forming limit of high-strength steel sheets using ductile fracture criterion TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 91, 6, 553-559 TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 91, 6, 553-559 TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 91, 6, 553-559 2005/06 日本語 研究論文(学術雑誌) 公開
H Takuda, T Morishita, T Kinoshita, N Shirakawa H Takuda, T Morishita, T Kinoshita, N Shirakawa H Takuda, T Morishita, T Kinoshita, N Shirakawa Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperatures Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperatures Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperatures JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 164, 1258-1262 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 164, 1258-1262 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 164, 1258-1262 2005/05 英語 研究論文(学術雑誌) 公開
Hitoshi Fujimoto, Yu Shiotani, Albert Y. Tong, Hirohiko Takuda Hitoshi Fujimoto, Yu Shiotani, Albert Y. Tong, Hirohiko Takuda Hitoshi Fujimoto, Yu Shiotani, Albert Y. Tong, Hirohiko Takuda Numerical and experimental study on oblique collision of water droplet with a solid substrate Numerical and experimental study on oblique collision of water droplet with a solid substrate Numerical and experimental study on oblique collision of water droplet with a solid substrate PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION, 261, 805-811 PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION, 261, 805-811 PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION, 261, 805-811 2005 英語 研究論文(国際会議プロシーディングス) 公開
H Fujimoto, S Murakami, A Omura, H Takuda H Fujimoto, S Murakami, A Omura, H Takuda H Fujimoto, S Murakami, A Omura, H Takuda Effect of local pipe bends on pump performance of a small air-lift system in transporting solid particles Effect of local pipe bends on pump performance of a small air-lift system in transporting solid particles Effect of local pipe bends on pump performance of a small air-lift system in transporting solid particles INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 25, 6, 996-1005 INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 25, 6, 996-1005 INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 25, 6, 996-1005 2004/12 英語 研究論文(学術雑誌) 公開
H Fujimoto, H Takuda H Fujimoto, H Takuda H Fujimoto, H Takuda Entrapment of air at 45(circle) oblique collision of a water drop with a smooth solid surface at room temperature Entrapment of air at 45(circle) oblique collision of a water drop with a smooth solid surface at room temperature Entrapment of air at 45(circle) oblique collision of a water drop with a smooth solid surface at room temperature INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 47, 14-16, 3301-3305 INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 47, 14-16, 3301-3305 INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 47, 14-16, 3301-3305 2004/07 英語 研究論文(学術雑誌) 公開
宅田 裕彦 宅田 裕彦 宅田 裕彦 Application of Ductile Fracture Criterion to Prediction of Forming Limit of High-Strength Steel Sheets Application of Ductile Fracture Criterion to Prediction of Forming Limit of High-Strength Steel Sheets Application of Ductile Fracture Criterion to Prediction of Forming Limit of High-Strength Steel Sheets Steel Grips,2, 439-443 Steel Grips,2, 439-443 Steel Grips,2, 439-443 2004 英語 公開
A.Y. Tong, H. Fujimoto, S. Kasliwal, H. Takuda A.Y. Tong, H. Fujimoto, S. Kasliwal, H. Takuda A.Y. Tong, H. Fujimoto, S. Kasliwal, H. Takuda A numerical study on the successive impingement of droplets onto a substrate A numerical study on the successive impingement of droplets onto a substrate A numerical study on the successive impingement of droplets onto a substrate American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 375, 2, 589-596 American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 375, 2, 589-596 American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 375, 2, 589-596 2004 英語 公開
H. Fujimoto, A.Y. Tong, Y. Shiotani, H. Takuda H. Fujimoto, A.Y. Tong, Y. Shiotani, H. Takuda H. Fujimoto, A.Y. Tong, Y. Shiotani, H. Takuda Interaction phenomena of two water droplets successively impacting onto a solid surface Interaction phenomena of two water droplets successively impacting onto a solid surface Interaction phenomena of two water droplets successively impacting onto a solid surface American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 375, 2, 597-603 American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 375, 2, 597-603 American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 375, 2, 597-603 2004 英語 公開
H Fujimoto, Takezaki, I, Y Shiotani, A Tong, H Takuda H Fujimoto, Takezaki, I, Y Shiotani, A Tong, H Takuda H Fujimoto, Takezaki, I, Y Shiotani, A Tong, H Takuda Collision dynamics of two droplets impinging successively onto a hot solid Collision dynamics of two droplets impinging successively onto a hot solid Collision dynamics of two droplets impinging successively onto a hot solid ISIJ INTERNATIONAL, 44, 6, 1049-1056 ISIJ INTERNATIONAL, 44, 6, 1049-1056 ISIJ INTERNATIONAL, 44, 6, 1049-1056 2004 英語 研究論文(学術雑誌) 公開
H Takuda, K Mori, T Masachika, E Yamazaki, Y Watanabe H Takuda, K Mori, T Masachika, E Yamazaki, Y Watanabe H Takuda, K Mori, T Masachika, E Yamazaki, Y Watanabe Finite element analysis of the formability of an austenitic stainless steel sheet in warm deep drawing Finite element analysis of the formability of an austenitic stainless steel sheet in warm deep drawing Finite element analysis of the formability of an austenitic stainless steel sheet in warm deep drawing JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 143, 242-248 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 143, 242-248 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 143, 242-248 2003/12 英語 研究論文(学術雑誌) 公開
H Takuda, S Kikuchi, N Yoshida, H Okahara H Takuda, S Kikuchi, N Yoshida, H Okahara H Takuda, S Kikuchi, N Yoshida, H Okahara Tensile properties and press formability of a Mg-9Li-1Y alloy sheet Tensile properties and press formability of a Mg-9Li-1Y alloy sheet Tensile properties and press formability of a Mg-9Li-1Y alloy sheet MATERIALS TRANSACTIONS, 44, 11, 2266-2270 MATERIALS TRANSACTIONS, 44, 11, 2266-2270 MATERIALS TRANSACTIONS, 44, 11, 2266-2270 2003/11 英語 研究論文(学術雑誌) 公開
H Fujimoto, S Ogawa, H Takuda, N Hatta H Fujimoto, S Ogawa, H Takuda, N Hatta H Fujimoto, S Ogawa, H Takuda, N Hatta Operation performance of a small air-lift pump for conveying solid particles Operation performance of a small air-lift pump for conveying solid particles Operation performance of a small air-lift pump for conveying solid particles JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 125, 1, 17-25 JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 125, 1, 17-25 JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 125, 1, 17-25 2003/03 英語 研究論文(学術雑誌) 公開
H. Takuda H. Takuda H. Takuda Prediction of forming limit of high-strength steel sheets by means of criterion for ductile fracture Prediction of forming limit of high-strength steel sheets by means of criterion for ductile fracture Prediction of forming limit of high-strength steel sheets by means of criterion for ductile fracture Key Engineering Materials, 251-2, 1-6 Key Engineering Materials, 251-2, 1-6 Key Engineering Materials, 251-2, 1-6 2003 英語 公開
宅田 裕彦 宅田 裕彦 AZ31 マグネシウム合金板の温間加工後の引張特性 AZ31 マグネシウム合金板の温間加工後の引張特性 塑性と加工, 43, 503, 1173-1177 塑性と加工, 43, 503, 1173-1177 , 43, 503, 1173-1177 2002/12/25 日本語 公開
H Takuda, K Mori, Masuda, I, Y Abe, M Matsuo H Takuda, K Mori, Masuda, I, Y Abe, M Matsuo H Takuda, K Mori, Masuda, I, Y Abe, M Matsuo Finite element simulation of warm deep drawing of aluminium alloy sheet when accounting for heat conduction Finite element simulation of warm deep drawing of aluminium alloy sheet when accounting for heat conduction Finite element simulation of warm deep drawing of aluminium alloy sheet when accounting for heat conduction JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 120, 1-3, 412-418 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 120, 1-3, 412-418 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 120, 1-3, 412-418 2002/01 英語 研究論文(学術雑誌) 公開
H Takuda, H Matsusaka, S Kikuchi, K Kubota H Takuda, H Matsusaka, S Kikuchi, K Kubota H Takuda, H Matsusaka, S Kikuchi, K Kubota Tensile properties of a few Mg-Li-Zn alloy thin sheets Tensile properties of a few Mg-Li-Zn alloy thin sheets Tensile properties of a few Mg-Li-Zn alloy thin sheets JOURNAL OF MATERIALS SCIENCE, 37, 1, 51-57 JOURNAL OF MATERIALS SCIENCE, 37, 1, 51-57 JOURNAL OF MATERIALS SCIENCE, 37, 1, 51-57 2002/01 英語 研究論文(学術雑誌) 公開
H Fujimoto, T Ogino, H Takuda, N Hatta H Fujimoto, T Ogino, H Takuda, N Hatta H Fujimoto, T Ogino, H Takuda, N Hatta Collision of a droplet with a hemispherical static droplet on a solid Collision of a droplet with a hemispherical static droplet on a solid Collision of a droplet with a hemispherical static droplet on a solid INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 27, 7, 1227-1245 INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 27, 7, 1227-1245 INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 27, 7, 1227-1245 2001/07 英語 研究論文(学術雑誌) 公開
H Fujimoto, T Ogino, N Hatta, H Takuda H Fujimoto, T Ogino, N Hatta, H Takuda H Fujimoto, T Ogino, N Hatta, H Takuda Numerical simulation of successive collision of two liquid droplets with a solid wall Numerical simulation of successive collision of two liquid droplets with a solid wall Numerical simulation of successive collision of two liquid droplets with a solid wall ISIJ INTERNATIONAL, 41, 5, 454-459 ISIJ INTERNATIONAL, 41, 5, 454-459 ISIJ INTERNATIONAL, 41, 5, 454-459 2001 英語 研究論文(学術雑誌) 公開
N Hatta, M Omodaka, F Nakajima, H Fujimoto, H Takuda N Hatta, M Omodaka, F Nakajima, H Fujimoto, H Takuda N Hatta, M Omodaka, F Nakajima, H Fujimoto, H Takuda Prediction of gas-liquid two-phase mixture flow in a vertical pipe with a sudden expansion in diameter Prediction of gas-liquid two-phase mixture flow in a vertical pipe with a sudden expansion in diameter Prediction of gas-liquid two-phase mixture flow in a vertical pipe with a sudden expansion in diameter STEEL RESEARCH, 71, 5, 153-160 STEEL RESEARCH, 71, 5, 153-160 STEEL RESEARCH, 71, 5, 153-160 2000/05 英語 研究論文(学術雑誌) 公開
H Takuda, T Enami, K Kubota, N Hatta H Takuda, T Enami, K Kubota, N Hatta H Takuda, T Enami, K Kubota, N Hatta The formability of a thin sheet of Mg-8.5Li-1Zn alloy The formability of a thin sheet of Mg-8.5Li-1Zn alloy The formability of a thin sheet of Mg-8.5Li-1Zn alloy JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 101, 1-3, 281-286 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 101, 1-3, 281-286 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 101, 1-3, 281-286 2000/04 英語 研究論文(学術雑誌) 公開
H Takuda, K Mori, N Takakura, K Yamaguchi H Takuda, K Mori, N Takakura, K Yamaguchi H Takuda, K Mori, N Takakura, K Yamaguchi Finite element analysis of limit strains in biaxial stretching of sheet metals allowing for ductile fracture Finite element analysis of limit strains in biaxial stretching of sheet metals allowing for ductile fracture Finite element analysis of limit strains in biaxial stretching of sheet metals allowing for ductile fracture INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 42, 4, 785-798 INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 42, 4, 785-798 INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 42, 4, 785-798 2000/04 英語 研究論文(学術雑誌) 公開
H Fujimoto, H Takuda, N Hatta, R Viskanta H Fujimoto, H Takuda, N Hatta, R Viskanta H Fujimoto, H Takuda, N Hatta, R Viskanta Numerical simulation of transient cooling of a hot solid by an impinging free surface jet Numerical simulation of transient cooling of a hot solid by an impinging free surface jet Numerical simulation of transient cooling of a hot solid by an impinging free surface jet NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 36, 8, 767-780 NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 36, 8, 767-780 NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 36, 8, 767-780 1999/12 英語 研究論文(学術雑誌) 公開
H Takada, S Kikuchi, T Tsukada, K Kubota, N Hatta H Takada, S Kikuchi, T Tsukada, K Kubota, N Hatta H Takada, S Kikuchi, T Tsukada, K Kubota, N Hatta Effect of strain rate on deformation behaviour of a Mg-8.5Li-1Zn alloy sheet at room temperature Effect of strain rate on deformation behaviour of a Mg-8.5Li-1Zn alloy sheet at room temperature Effect of strain rate on deformation behaviour of a Mg-8.5Li-1Zn alloy sheet at room temperature MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 271, 1-2, 251-256 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 271, 1-2, 251-256 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 271, 1-2, 251-256 1999/11 英語 研究論文(学術雑誌) 公開
H Takuda, K Mori, N Hatta H Takuda, K Mori, N Hatta H Takuda, K Mori, N Hatta The application of some criteria for ductile fracture to the prediction of the forming limit of sheet metals The application of some criteria for ductile fracture to the prediction of the forming limit of sheet metals The application of some criteria for ductile fracture to the prediction of the forming limit of sheet metals JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 95, 1-3, 116-121 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 95, 1-3, 116-121 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 95, 1-3, 116-121 1999/10 英語 研究論文(学術雑誌) 公開
H Takuda, K Mori, H Fujimoto, N Hatta H Takuda, K Mori, H Fujimoto, N Hatta H Takuda, K Mori, H Fujimoto, N Hatta Prediction of forming limit in bore-expanding of sheet metals using ductile fracture criterion Prediction of forming limit in bore-expanding of sheet metals using ductile fracture criterion Prediction of forming limit in bore-expanding of sheet metals using ductile fracture criterion JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 93, 433-438 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 93, 433-438 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 93, 433-438 1999/08 英語 研究論文(学術雑誌) 公開
N Hatta, M Omodaka, F Nakajima, T Takatsu, H Fujimoto, H Takuda N Hatta, M Omodaka, F Nakajima, T Takatsu, H Fujimoto, H Takuda N Hatta, M Omodaka, F Nakajima, T Takatsu, H Fujimoto, H Takuda Predictable model for characteristics of one-dimensional solid-gas-liquid three-phase mixtures flow along a vertical pipeline with an abrupt enlargement in diameter Predictable model for characteristics of one-dimensional solid-gas-liquid three-phase mixtures flow along a vertical pipeline with an abrupt enlargement in diameter Predictable model for characteristics of one-dimensional solid-gas-liquid three-phase mixtures flow along a vertical pipeline with an abrupt enlargement in diameter JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 121, 2, 330-342 JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 121, 2, 330-342 JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 121, 2, 330-342 1999/06 英語 研究論文(学術雑誌) 公開
H Takuda, T Yoshii, N Hatta H Takuda, T Yoshii, N Hatta H Takuda, T Yoshii, N Hatta Finite-element analysis of the formability of a magnesium-based alloy AZ31 sheet Finite-element analysis of the formability of a magnesium-based alloy AZ31 sheet Finite-element analysis of the formability of a magnesium-based alloy AZ31 sheet JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 90, 135-140 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 90, 135-140 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 90, 135-140 1999/05 英語 研究論文(学術雑誌) 公開
H Takuda, S Kikuchi, N Hatta H Takuda, S Kikuchi, N Hatta H Takuda, S Kikuchi, N Hatta Formability of a commercially pure zirconium sheet Formability of a commercially pure zirconium sheet Formability of a commercially pure zirconium sheet JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 84, 1-3, 117-121 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 84, 1-3, 117-121 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 84, 1-3, 117-121 1998/12 英語 研究論文(学術雑誌) 公開
Hirohiko Takuda, Ken Ichiro Mori, Masashi Kaneshiro, Masashi Kaneshiro, Natsuo Hatta Hirohiko Takuda, Ken Ichiro Mori, Masashi Kaneshiro, Masashi Kaneshiro, Natsuo Hatta Hirohiko Takuda, Ken Ichiro Mori, Masashi Kaneshiro, Masashi Kaneshiro, Natsuo Hatta Finite element analysis of bore-expanding processes with ductile fracture criterion Finite element analysis of bore-expanding processes with ductile fracture criterion Finite element analysis of bore-expanding processes with ductile fracture criterion Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 84, 24-29 Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 84, 24-29 Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 84, 24-29 1998/12/01 公開
Hirohiko Takuda, Natsuo Hatta Hirohiko Takuda, Natsuo Hatta Hirohiko Takuda, Natsuo Hatta Numerical analysis of the formability of an aluminum 2024 alloy sheet and its laminates with steel sheets Numerical analysis of the formability of an aluminum 2024 alloy sheet and its laminates with steel sheets Numerical analysis of the formability of an aluminum 2024 alloy sheet and its laminates with steel sheets Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 29, 2829-2834 Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 29, 2829-2834 Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 29, 2829-2834 1998/12/01 公開
H. Takuda, H. Fujimoto, N. Hatta H. Takuda, H. Fujimoto, N. Hatta H. Takuda, H. Fujimoto, N. Hatta Formabilities of steel/aluminium alloy laminated composite sheets Formabilities of steel/aluminium alloy laminated composite sheets Formabilities of steel/aluminium alloy laminated composite sheets Journal of Materials Science, 33, 91-97 Journal of Materials Science, 33, 91-97 Journal of Materials Science, 33, 91-97 1998/12/01 公開
H Takuda, N Hatta H Takuda, N Hatta H Takuda, N Hatta Numerical analysis of the formability of an aluminum 2024 alloy sheet and its laminates with steel sheets Numerical analysis of the formability of an aluminum 2024 alloy sheet and its laminates with steel sheets Numerical analysis of the formability of an aluminum 2024 alloy sheet and its laminates with steel sheets METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 29, 11, 2829-2834 METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 29, 11, 2829-2834 METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 29, 11, 2829-2834 1998/11 英語 研究論文(学術雑誌) 公開
H Takuda, Y Tanaka, N Hatta H Takuda, Y Tanaka, N Hatta H Takuda, Y Tanaka, N Hatta Finite element analysis of forming limit in bore expanding of aluminium alloy sheets Finite element analysis of forming limit in bore expanding of aluminium alloy sheets Finite element analysis of forming limit in bore expanding of aluminium alloy sheets ARCHIVE OF APPLIED MECHANICS, 68, 7-8, 566-576 ARCHIVE OF APPLIED MECHANICS, 68, 7-8, 566-576 ARCHIVE OF APPLIED MECHANICS, 68, 7-8, 566-576 1998/09 英語 研究論文(学術雑誌) 公開
H Takuda, H Fujimoto, N Hatta H Takuda, H Fujimoto, N Hatta H Takuda, H Fujimoto, N Hatta Modelling on flow stress of Mg-Al-Zn alloys at elevated temperatures Modelling on flow stress of Mg-Al-Zn alloys at elevated temperatures Modelling on flow stress of Mg-Al-Zn alloys at elevated temperatures JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 80-1, 513-516 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 80-1, 513-516 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 80-1, 513-516 1998/08 英語 研究論文(学術雑誌) 公開
H Takuda, K Mori, M Kaneshiro, N Hatta H Takuda, K Mori, M Kaneshiro, N Hatta H Takuda, K Mori, M Kaneshiro, N Hatta Finite element analysis of bore-expanding processes with ductile fracture criterion Finite element analysis of bore-expanding processes with ductile fracture criterion Finite element analysis of bore-expanding processes with ductile fracture criterion TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 84, 3, 182-187 TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 84, 3, 182-187 TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 84, 3, 182-187 1998/03 日本語 研究論文(学術雑誌) 公開
H Takuda, N Hatta H Takuda, N Hatta H Takuda, N Hatta Numerical analysis of formability of a commercially pure zirconium sheet in some sheet forming processes Numerical analysis of formability of a commercially pure zirconium sheet in some sheet forming processes Numerical analysis of formability of a commercially pure zirconium sheet in some sheet forming processes MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 242, 1-2, 15-21 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 242, 1-2, 15-21 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 242, 1-2, 15-21 1998/02 英語 研究論文(学術雑誌) 公開
H Takuda, H Fujimoto, N Hatta H Takuda, H Fujimoto, N Hatta H Takuda, H Fujimoto, N Hatta Formabilities of steel/aluminium alloy laminated composite sheets Formabilities of steel/aluminium alloy laminated composite sheets Formabilities of steel/aluminium alloy laminated composite sheets JOURNAL OF MATERIALS SCIENCE, 33, 1, 91-97 JOURNAL OF MATERIALS SCIENCE, 33, 1, 91-97 JOURNAL OF MATERIALS SCIENCE, 33, 1, 91-97 1998/01 英語 研究論文(学術雑誌) 公開
H Takuda, N Hatta H Takuda, N Hatta H Takuda, N Hatta A simple approach to plane strain extrusion with dead metal zone using upper-bound theorem A simple approach to plane strain extrusion with dead metal zone using upper-bound theorem A simple approach to plane strain extrusion with dead metal zone using upper-bound theorem METALS AND MATERIALS-KOREA, 4, 4, 737-741 METALS AND MATERIALS-KOREA, 4, 4, 737-741 METALS AND MATERIALS-KOREA, 4, 4, 737-741 1998 英語 研究論文(学術雑誌) 公開
H Takuda, H Fujimoto, Y Kuroda, N Hatta H Takuda, H Fujimoto, Y Kuroda, N Hatta H Takuda, H Fujimoto, Y Kuroda, N Hatta Finite element analysis of formability of a few kinds of special steel sheets Finite element analysis of formability of a few kinds of special steel sheets Finite element analysis of formability of a few kinds of special steel sheets STEEL RESEARCH, 68, 9, 398-402 STEEL RESEARCH, 68, 9, 398-402 STEEL RESEARCH, 68, 9, 398-402 1997/09 英語 研究論文(学術雑誌) 公開
N Hatta, H Fujimoto, K Kinoshita, H Takuda N Hatta, H Fujimoto, K Kinoshita, H Takuda N Hatta, H Fujimoto, K Kinoshita, H Takuda Experimental study of deformation mechanism of a water droplet impinging on hot metallic surfaces above the Leidenfrost temperature Experimental study of deformation mechanism of a water droplet impinging on hot metallic surfaces above the Leidenfrost temperature Experimental study of deformation mechanism of a water droplet impinging on hot metallic surfaces above the Leidenfrost temperature JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 119, 3, 692-699 JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 119, 3, 692-699 JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 119, 3, 692-699 1997/09 英語 研究論文(学術雑誌) 公開
H Takuda, K Mori, H Fujimoto, N Hatta H Takuda, K Mori, H Fujimoto, N Hatta H Takuda, K Mori, H Fujimoto, N Hatta Fracture prediction in stretch forming using finite element simulation combined with ductile fracture criterion Fracture prediction in stretch forming using finite element simulation combined with ductile fracture criterion Fracture prediction in stretch forming using finite element simulation combined with ductile fracture criterion ARCHIVE OF APPLIED MECHANICS, 67, 3, 143-150 ARCHIVE OF APPLIED MECHANICS, 67, 3, 143-150 ARCHIVE OF APPLIED MECHANICS, 67, 3, 143-150 1997/02 英語 研究論文(学術雑誌) 公開
N Hatta, H Fujimoto, H Takuda N Hatta, H Fujimoto, H Takuda N Hatta, H Fujimoto, H Takuda Deformation process of a droplet impinging on a hot oxide-scaled surface above the Leidenfrost temperature Deformation process of a droplet impinging on a hot oxide-scaled surface above the Leidenfrost temperature Deformation process of a droplet impinging on a hot oxide-scaled surface above the Leidenfrost temperature STEEL RESEARCH, 68, 1, 15-19 STEEL RESEARCH, 68, 1, 15-19 STEEL RESEARCH, 68, 1, 15-19 1997/01 英語 研究論文(学術雑誌) 公開
H. Fujimoto, N. Hatta, H. Takuda H. Fujimoto, N. Hatta, H. Takuda H. Fujimoto, N. Hatta, H. Takuda Collision dynamics of two droplets Collision dynamics of two droplets Collision dynamics of two droplets American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 244, 167-172 American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 244, 167-172 American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 244, 167-172 1997 英語 公開
H Takuda, K Mori, H Fujimoto, N Hatta H Takuda, K Mori, H Fujimoto, N Hatta H Takuda, K Mori, H Fujimoto, N Hatta Prediction of forming limit in deep drawing of Fe/Al laminated composite sheets using ductile fracture criterion Prediction of forming limit in deep drawing of Fe/Al laminated composite sheets using ductile fracture criterion Prediction of forming limit in deep drawing of Fe/Al laminated composite sheets using ductile fracture criterion JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 60, 1-4, 291-296 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 60, 1-4, 291-296 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 60, 1-4, 291-296 1996/06 英語 研究論文(学術雑誌) 公開
宅田 裕彦 宅田 裕彦 簡易延性破壊条件式を用いた鋼/アルミニウム合金積層板の円筒深絞り加工における成形限界予測 簡易延性破壊条件式を用いた鋼/アルミニウム合金積層板の円筒深絞り加工における成形限界予測 塑性と加工, 37, 424, 509-514 塑性と加工, 37, 424, 509-514 , 37, 424, 509-514 1996/05/20 日本語 公開
MORI K, TAKUDA H MORI K, TAKUDA H MORI K, TAKUDA H Prediction of forming limit in deep drawing by combination of finite element simulation and criterion for ductile fracture. Prediction of forming limit in deep drawing by combination of finite element simulation and criterion for ductile fracture. Prediction of forming limit in deep drawing by combination of finite element simulation and criterion for ductile fracture. Trans N Am Manuf Res Inst SME, 24th, 143-148 Trans N Am Manuf Res Inst SME, 24th, 143-148 Trans N Am Manuf Res Inst SME, 24th, 143-148 1996 英語 公開
N Hatta, H Fujimoto, H Takuda N Hatta, H Fujimoto, H Takuda N Hatta, H Fujimoto, H Takuda Deformation process of a water droplet impinging on a solid surface Deformation process of a water droplet impinging on a solid surface Deformation process of a water droplet impinging on a solid surface JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 117, 3, 394-401 JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 117, 3, 394-401 JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 117, 3, 394-401 1995/09 英語 研究論文(学術雑誌) 公開
宅田裕彦, 森謙一郎, 広瀬智行, 八田夏夫 宅田裕彦, 森謙一郎, 広瀬智行, 八田夏夫 延性破壊を考慮した有限要素シミュレーションによる深絞り加工の成形限界予測 延性破壊を考慮した有限要素シミュレーションによる深絞り加工の成形限界予測 塑性と加工, 36, 416, 985-990 塑性と加工, 36, 416, 985-990 , 36, 416, 985-990 1995/09 日本語 公開
H TAKUDA, H FUJIMOTO, M TSUCHIDA, N HATTA H TAKUDA, H FUJIMOTO, M TSUCHIDA, N HATTA H TAKUDA, H FUJIMOTO, M TSUCHIDA, N HATTA FINITE-ELEMENT ANALYSIS OF EDGE LAMINATION DURING HOT-ROLLING PROCESS OF ALUMINUM-ALLOY FINITE-ELEMENT ANALYSIS OF EDGE LAMINATION DURING HOT-ROLLING PROCESS OF ALUMINUM-ALLOY FINITE-ELEMENT ANALYSIS OF EDGE LAMINATION DURING HOT-ROLLING PROCESS OF ALUMINUM-ALLOY ARCHIVE OF APPLIED MECHANICS, 65, 6, 365-373 ARCHIVE OF APPLIED MECHANICS, 65, 6, 365-373 ARCHIVE OF APPLIED MECHANICS, 65, 6, 365-373 1995/07 英語 研究論文(学術雑誌) 公開
H TAKUDA, N YAMAZAKI, N HATTA, S KIKUCHI H TAKUDA, N YAMAZAKI, N HATTA, S KIKUCHI H TAKUDA, N YAMAZAKI, N HATTA, S KIKUCHI INFLUENCE OF COLD-ROLLING AND ANNEALING CONDITIONS ON FORMABILITY OF ALUMINUM-ALLOY SHEET INFLUENCE OF COLD-ROLLING AND ANNEALING CONDITIONS ON FORMABILITY OF ALUMINUM-ALLOY SHEET INFLUENCE OF COLD-ROLLING AND ANNEALING CONDITIONS ON FORMABILITY OF ALUMINUM-ALLOY SHEET JOURNAL OF MATERIALS SCIENCE, 30, 4, 957-963 JOURNAL OF MATERIALS SCIENCE, 30, 4, 957-963 JOURNAL OF MATERIALS SCIENCE, 30, 4, 957-963 1995/02 英語 研究論文(学術雑誌) 公開
N HATTA, H FUJIMOTO, H TAKUDA, K YAMAMOTO, K KINOSHITA, O TAKAHASHI N HATTA, H FUJIMOTO, H TAKUDA, K YAMAMOTO, K KINOSHITA, O TAKAHASHI N HATTA, H FUJIMOTO, H TAKUDA, K YAMAMOTO, K KINOSHITA, O TAKAHASHI NUMERICAL-ANALYSIS OF DEFORMATION-BEHAVIOR OF A WATER DROPLET IMPINGING ON A SOLID-SURFACE AT ROOM-TEMPERATURE NUMERICAL-ANALYSIS OF DEFORMATION-BEHAVIOR OF A WATER DROPLET IMPINGING ON A SOLID-SURFACE AT ROOM-TEMPERATURE NUMERICAL-ANALYSIS OF DEFORMATION-BEHAVIOR OF A WATER DROPLET IMPINGING ON A SOLID-SURFACE AT ROOM-TEMPERATURE ISIJ INTERNATIONAL, 35, 9, 1094-1099 ISIJ INTERNATIONAL, 35, 9, 1094-1099 ISIJ INTERNATIONAL, 35, 9, 1094-1099 1995 英語 研究論文(学術雑誌) 公開
N HATTA, H FUJIMOTO, H TAKUDA, K KINOSHITA, O TAKAHASHI N HATTA, H FUJIMOTO, H TAKUDA, K KINOSHITA, O TAKAHASHI N HATTA, H FUJIMOTO, H TAKUDA, K KINOSHITA, O TAKAHASHI COLLISION DYNAMICS OF A WATER DROPLET IMPINGING ON A RIGID SURFACE ABOVE THE LEIDENFROST TEMPERATURE COLLISION DYNAMICS OF A WATER DROPLET IMPINGING ON A RIGID SURFACE ABOVE THE LEIDENFROST TEMPERATURE COLLISION DYNAMICS OF A WATER DROPLET IMPINGING ON A RIGID SURFACE ABOVE THE LEIDENFROST TEMPERATURE ISIJ INTERNATIONAL, 35, 1, 50-55 ISIJ INTERNATIONAL, 35, 1, 50-55 ISIJ INTERNATIONAL, 35, 1, 50-55 1995 英語 研究論文(学術雑誌) 公開
H TAKUDA, S KIKUCHI, N HATTA H TAKUDA, S KIKUCHI, N HATTA H TAKUDA, S KIKUCHI, N HATTA MODELING OF COMPREHENSIVE FORMULA FOR FLOW CURVES OF ALUMINUM-ALLOYS AT ELEVATED-TEMPERATURES MODELING OF COMPREHENSIVE FORMULA FOR FLOW CURVES OF ALUMINUM-ALLOYS AT ELEVATED-TEMPERATURES MODELING OF COMPREHENSIVE FORMULA FOR FLOW CURVES OF ALUMINUM-ALLOYS AT ELEVATED-TEMPERATURES MATERIALS TRANSACTIONS JIM, 34, 8, 711-717 MATERIALS TRANSACTIONS JIM, 34, 8, 711-717 MATERIALS TRANSACTIONS JIM, 34, 8, 711-717 1993/08 英語 研究論文(学術雑誌) 公開
N HATTA, H FUJIMOTO, H TAKUDA N HATTA, H FUJIMOTO, H TAKUDA N HATTA, H FUJIMOTO, H TAKUDA NUMERICAL-ANALYSIS OF FLOW PATTERN OF IMPINGING LIQUID SPRAYS IN A COLD MODEL FOR COOLING A HOT FLAT-PLATE NUMERICAL-ANALYSIS OF FLOW PATTERN OF IMPINGING LIQUID SPRAYS IN A COLD MODEL FOR COOLING A HOT FLAT-PLATE NUMERICAL-ANALYSIS OF FLOW PATTERN OF IMPINGING LIQUID SPRAYS IN A COLD MODEL FOR COOLING A HOT FLAT-PLATE APPLIED SCIENTIFIC RESEARCH, 50, 2, 129-147 APPLIED SCIENTIFIC RESEARCH, 50, 2, 129-147 APPLIED SCIENTIFIC RESEARCH, 50, 2, 129-147 1993/03 英語 研究論文(学術雑誌) 公開
H TAKUDA, S KIKUCHI, N HATTA, J KOKADO H TAKUDA, S KIKUCHI, N HATTA, J KOKADO H TAKUDA, S KIKUCHI, N HATTA, J KOKADO MECHANICAL-PROPERTIES OF TYPE-304 STAINLESS-STEEL SHEET PRODUCED BY TWIN-ROLL STRIP CASTING PROCESS MECHANICAL-PROPERTIES OF TYPE-304 STAINLESS-STEEL SHEET PRODUCED BY TWIN-ROLL STRIP CASTING PROCESS MECHANICAL-PROPERTIES OF TYPE-304 STAINLESS-STEEL SHEET PRODUCED BY TWIN-ROLL STRIP CASTING PROCESS STEEL RESEARCH, 64, 2, 132-135 STEEL RESEARCH, 64, 2, 132-135 STEEL RESEARCH, 64, 2, 132-135 1993/02 英語 研究論文(学術雑誌) 公開
宅田 裕彦 宅田 裕彦 アルミニウム合金の熱間変形抵抗の汎用数式モデル アルミニウム合金の熱間変形抵抗の汎用数式モデル 塑性と加工,34/385,165-170 塑性と加工,34/385,165-170 1993 日本語 公開
N. Hatta, H. Takuda, H. Fujimoto, M. Ueda N. Hatta, H. Takuda, H. Fujimoto, M. Ueda N. Hatta, H. Takuda, H. Fujimoto, M. Ueda Thermal calculation of the hot rolling process of sheet aluminium Thermal calculation of the hot rolling process of sheet aluminium Thermal calculation of the hot rolling process of sheet aluminium Ingenieur-Archiv, 62, 435-446 Ingenieur-Archiv, 62, 435-446 Ingenieur-Archiv, 62, 435-446 1992/12/01 公開
N. Hatta, H. Takuda, H. Fujimoto, M. Ueda N. Hatta, H. Takuda, H. Fujimoto, M. Ueda N. Hatta, H. Takuda, H. Fujimoto, M. Ueda Thermal calculation of the hot rolling process of sheet aluminium Thermal calculation of the hot rolling process of sheet aluminium Thermal calculation of the hot rolling process of sheet aluminium Ingenieur-Archiv, 62, 7, 435-446 Ingenieur-Archiv, 62, 7, 435-446 Ingenieur-Archiv, 62, 7, 435-446 1992/10 英語 公開
H TAKUDA, S KIKUCHI, N HATTA H TAKUDA, S KIKUCHI, N HATTA H TAKUDA, S KIKUCHI, N HATTA POSSIBILITY OF GRAIN-REFINEMENT FOR SUPERPLASTICITY OF A MG-AL-ZN ALLOY BY PRE-DEFORMATION POSSIBILITY OF GRAIN-REFINEMENT FOR SUPERPLASTICITY OF A MG-AL-ZN ALLOY BY PRE-DEFORMATION POSSIBILITY OF GRAIN-REFINEMENT FOR SUPERPLASTICITY OF A MG-AL-ZN ALLOY BY PRE-DEFORMATION JOURNAL OF MATERIALS SCIENCE, 27, 4, 937-940 JOURNAL OF MATERIALS SCIENCE, 27, 4, 937-940 JOURNAL OF MATERIALS SCIENCE, 27, 4, 937-940 1992/02 英語 研究論文(学術雑誌) 公開
宅田 裕彦 宅田 裕彦 薄板連続鋳造法で製造されたステンレス鋼板の鋳造,冷延および焼純集合組織 薄板連続鋳造法で製造されたステンレス鋼板の鋳造,冷延および焼純集合組織 塑性と加工,33/380,1069-1073 塑性と加工,33/380,1069-1073 1992 日本語 公開
H TAKUDA, S KIKUCHI, N HATTA H TAKUDA, S KIKUCHI, N HATTA H TAKUDA, S KIKUCHI, N HATTA TENSILE PROPERTIES OF FINE-GRAINED 7475 ALUMINUM-ALLOY AT VARIOUS TEMPERATURES AND STRAIN RATES TENSILE PROPERTIES OF FINE-GRAINED 7475 ALUMINUM-ALLOY AT VARIOUS TEMPERATURES AND STRAIN RATES TENSILE PROPERTIES OF FINE-GRAINED 7475 ALUMINUM-ALLOY AT VARIOUS TEMPERATURES AND STRAIN RATES JOURNAL OF MATERIALS SCIENCE, 26, 17, 4643-4647 JOURNAL OF MATERIALS SCIENCE, 26, 17, 4643-4647 JOURNAL OF MATERIALS SCIENCE, 26, 17, 4643-4647 1991/09 英語 研究論文(学術雑誌) 公開
H TAKUDA, S KIKUCHI, N HATTA, J KOKADO H TAKUDA, S KIKUCHI, N HATTA, J KOKADO H TAKUDA, S KIKUCHI, N HATTA, J KOKADO METALLOGRAPHIC OBSERVATIONS OF STAINLESS-STEEL SHEETS PRODUCED BY TWIN-ROLL TYPE STRIP CASTER METALLOGRAPHIC OBSERVATIONS OF STAINLESS-STEEL SHEETS PRODUCED BY TWIN-ROLL TYPE STRIP CASTER METALLOGRAPHIC OBSERVATIONS OF STAINLESS-STEEL SHEETS PRODUCED BY TWIN-ROLL TYPE STRIP CASTER STEEL RESEARCH, 62, 8, 346-351 STEEL RESEARCH, 62, 8, 346-351 STEEL RESEARCH, 62, 8, 346-351 1991 英語 研究論文(学術雑誌) 公開
H TAKUDA, N HATTA, M TERAMURA, J KOKADO H TAKUDA, N HATTA, M TERAMURA, J KOKADO H TAKUDA, N HATTA, M TERAMURA, J KOKADO SIMPLE-MODEL FOR THERMAL CALCULATION IN TWIN-ROLL STRIP CASTING PROCESS SIMPLE-MODEL FOR THERMAL CALCULATION IN TWIN-ROLL STRIP CASTING PROCESS SIMPLE-MODEL FOR THERMAL CALCULATION IN TWIN-ROLL STRIP CASTING PROCESS STEEL RESEARCH, 61, 7, 312-317 STEEL RESEARCH, 61, 7, 312-317 STEEL RESEARCH, 61, 7, 312-317 1990 英語 研究論文(学術雑誌) 公開
N HATTA, H TAKUDA, R ISHII, H FUJIMOTO N HATTA, H TAKUDA, R ISHII, H FUJIMOTO N HATTA, H TAKUDA, R ISHII, H FUJIMOTO A THEORETICAL-STUDY ON NOZZLE DESIGN FOR GAS PARTICLE MIXTURE FLOW A THEORETICAL-STUDY ON NOZZLE DESIGN FOR GAS PARTICLE MIXTURE FLOW A THEORETICAL-STUDY ON NOZZLE DESIGN FOR GAS PARTICLE MIXTURE FLOW ISIJ INTERNATIONAL, 29, 7, 605-613 ISIJ INTERNATIONAL, 29, 7, 605-613 ISIJ INTERNATIONAL, 29, 7, 605-613 1989 英語 研究論文(学術雑誌) 公開
N HATTA, Y TANAKA, H TAKUDA, J KOKADO N HATTA, Y TANAKA, H TAKUDA, J KOKADO N HATTA, Y TANAKA, H TAKUDA, J KOKADO A NUMERICAL STUDY ON COOLING PROCESS OF HOT STEEL PLATES BY A WATER CURTAIN A NUMERICAL STUDY ON COOLING PROCESS OF HOT STEEL PLATES BY A WATER CURTAIN A NUMERICAL STUDY ON COOLING PROCESS OF HOT STEEL PLATES BY A WATER CURTAIN ISIJ INTERNATIONAL, 29, 8, 673-679 ISIJ INTERNATIONAL, 29, 8, 673-679 ISIJ INTERNATIONAL, 29, 8, 673-679 1989 英語 研究論文(学術雑誌) 公開
H LIPPMANN, H TAKUDA H LIPPMANN, H TAKUDA H LIPPMANN, H TAKUDA ON THE EVALUATION OF THE UPPER-BOUND APPROACH TO PROBLEMS OF RIGID PLASTIC-DEFORMATION UNDER NON-STANDARD CONDITIONS ON THE EVALUATION OF THE UPPER-BOUND APPROACH TO PROBLEMS OF RIGID PLASTIC-DEFORMATION UNDER NON-STANDARD CONDITIONS ON THE EVALUATION OF THE UPPER-BOUND APPROACH TO PROBLEMS OF RIGID PLASTIC-DEFORMATION UNDER NON-STANDARD CONDITIONS INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 31, 1, 63-74 INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 31, 1, 63-74 INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 31, 1, 63-74 1989 英語 研究論文(学術雑誌) 公開
H TAKUDA, N HATTA, H LIPPMANN, J KOKADO H TAKUDA, N HATTA, H LIPPMANN, J KOKADO H TAKUDA, N HATTA, H LIPPMANN, J KOKADO UPPER-BOUND APPROACH TO PLANE-STRAIN STRIP ROLLING WITH FREE DEFORMATION ZONES UPPER-BOUND APPROACH TO PLANE-STRAIN STRIP ROLLING WITH FREE DEFORMATION ZONES UPPER-BOUND APPROACH TO PLANE-STRAIN STRIP ROLLING WITH FREE DEFORMATION ZONES INGENIEUR ARCHIV, 59, 4, 274-284 INGENIEUR ARCHIV, 59, 4, 274-284 INGENIEUR ARCHIV, 59, 4, 274-284 1989 英語 研究論文(学術雑誌) 公開
J KOKADO, N HATTA, H TAKUDA, R KITAGAWA J KOKADO, N HATTA, H TAKUDA, R KITAGAWA J KOKADO, N HATTA, H TAKUDA, R KITAGAWA THERMAL STUDY ON POSSIBILITY OF DIRECT ROLLING BETWEEN THE CONTINUOUS-CASTING AND HOT-ROLLING PROCESSES THERMAL STUDY ON POSSIBILITY OF DIRECT ROLLING BETWEEN THE CONTINUOUS-CASTING AND HOT-ROLLING PROCESSES THERMAL STUDY ON POSSIBILITY OF DIRECT ROLLING BETWEEN THE CONTINUOUS-CASTING AND HOT-ROLLING PROCESSES TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 74, 7, 1370-1377 TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 74, 7, 1370-1377 TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 74, 7, 1370-1377 1988/07 日本語 研究論文(学術雑誌) 公開
N HATTA, R ISHII, H TAKUDA, K UEDA, J KOKADO N HATTA, R ISHII, H TAKUDA, K UEDA, J KOKADO N HATTA, R ISHII, H TAKUDA, K UEDA, J KOKADO ANALYTICAL STUDY ON SUBSONIC NOZZLE FLOWS OF GAS PARTICLE MIXTURE ANALYTICAL STUDY ON SUBSONIC NOZZLE FLOWS OF GAS PARTICLE MIXTURE ANALYTICAL STUDY ON SUBSONIC NOZZLE FLOWS OF GAS PARTICLE MIXTURE TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 28, 11, 930-938 TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 28, 11, 930-938 TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 28, 11, 930-938 1988 英語 研究論文(学術雑誌) 公開
Natsuo Hatta, Hirohiko Takuda, Katsuhiro Sasai, Jun-ichi Kokado Natsuo Hatta, Hirohiko Takuda, Katsuhiro Sasai, Jun-ichi Kokado Natsuo Hatta, Hirohiko Takuda, Katsuhiro Sasai, Jun-ichi Kokado Prediction of mill load in multistage stretch-reducer of tubes Prediction of mill load in multistage stretch-reducer of tubes Prediction of mill load in multistage stretch-reducer of tubes Memoirs of the Faculty of Engineering, Kyoto University, 50 pt 4, 239-248 Memoirs of the Faculty of Engineering, Kyoto University, 50 pt 4, 239-248 Memoirs of the Faculty of Engineering, Kyoto University, 50 pt 4, 239-248 1988 英語 公開
N HATTA, J KOKADO, R ISHII, H TAKUDA N HATTA, J KOKADO, R ISHII, H TAKUDA N HATTA, J KOKADO, R ISHII, H TAKUDA NUMERICAL STUDY OF NONLINEAR DIFFERENTIAL-EQUATION FOR DECOMPOSITION PROCESS IN A TWO-DIMENSIONAL SYSTEM NUMERICAL STUDY OF NONLINEAR DIFFERENTIAL-EQUATION FOR DECOMPOSITION PROCESS IN A TWO-DIMENSIONAL SYSTEM NUMERICAL STUDY OF NONLINEAR DIFFERENTIAL-EQUATION FOR DECOMPOSITION PROCESS IN A TWO-DIMENSIONAL SYSTEM JOURNAL OF CHEMICAL PHYSICS, 88, 2, 888-895 JOURNAL OF CHEMICAL PHYSICS, 88, 2, 888-895 JOURNAL OF CHEMICAL PHYSICS, 88, 2, 888-895 1988/01 英語 研究論文(学術雑誌) 公開
Jun-ichi Kokado, Natsuo Hatta, Hirohiko Takuda, Takao Kawanami, Kazuo Watanabe, Shiro Ichikawa Jun-ichi Kokado, Natsuo Hatta, Hirohiko Takuda, Takao Kawanami, Kazuo Watanabe, Shiro Ichikawa Jun-ichi Kokado, Natsuo Hatta, Hirohiko Takuda, Takao Kawanami, Kazuo Watanabe, Shiro Ichikawa Distribution of the Stresses Arising in the Rolled Material During Width Reduction of Slabs. Distribution of the Stresses Arising in the Rolled Material During Width Reduction of Slabs. Distribution of the Stresses Arising in the Rolled Material During Width Reduction of Slabs. Memoirs of the Faculty of Engineering, Kyoto University, 47, pt 2, 130-141 Memoirs of the Faculty of Engineering, Kyoto University, 47, pt 2, 130-141 Memoirs of the Faculty of Engineering, Kyoto University, 47, pt 2, 130-141 1985 英語 公開
N HATTA, J KOKADO, H TAKUDA, J HARADA, K HIRAKU N HATTA, J KOKADO, H TAKUDA, J HARADA, K HIRAKU N HATTA, J KOKADO, H TAKUDA, J HARADA, K HIRAKU PREDICTABLE MODELING FOR COOLING PROCESS OF A HOT STEEL PLATE BY A LAMINAR WATER BAR PREDICTABLE MODELING FOR COOLING PROCESS OF A HOT STEEL PLATE BY A LAMINAR WATER BAR PREDICTABLE MODELING FOR COOLING PROCESS OF A HOT STEEL PLATE BY A LAMINAR WATER BAR ARCHIV FUR DAS EISENHUTTENWESEN, 55, 4, 143-148 ARCHIV FUR DAS EISENHUTTENWESEN, 55, 4, 143-148 ARCHIV FUR DAS EISENHUTTENWESEN, 55, 4, 143-148 1984 英語 研究論文(学術雑誌) 公開
J KOKADO, N HATTA, H TAKUDA, J HARADA, N YASUHIRA J KOKADO, N HATTA, H TAKUDA, J HARADA, N YASUHIRA J KOKADO, N HATTA, H TAKUDA, J HARADA, N YASUHIRA AN ANALYSIS OF FILM BOILING PHENOMENA OF SUBCOOLED WATER SPREADING RADIALLY ON A HOT STEEL PLATE AN ANALYSIS OF FILM BOILING PHENOMENA OF SUBCOOLED WATER SPREADING RADIALLY ON A HOT STEEL PLATE AN ANALYSIS OF FILM BOILING PHENOMENA OF SUBCOOLED WATER SPREADING RADIALLY ON A HOT STEEL PLATE ARCHIV FUR DAS EISENHUTTENWESEN, 55, 3, 113-118 ARCHIV FUR DAS EISENHUTTENWESEN, 55, 3, 113-118 ARCHIV FUR DAS EISENHUTTENWESEN, 55, 3, 113-118 1984 英語 研究論文(学術雑誌) 公開
J KOKADO, N HATTA, H TAKUDA J KOKADO, N HATTA, H TAKUDA J KOKADO, N HATTA, H TAKUDA NUMERICAL-ANALYSIS OF THE SLAB DEFORMATION IN VERTICAL ROLLING NUMERICAL-ANALYSIS OF THE SLAB DEFORMATION IN VERTICAL ROLLING NUMERICAL-ANALYSIS OF THE SLAB DEFORMATION IN VERTICAL ROLLING ARCHIV FUR DAS EISENHUTTENWESEN, 54, 12, 491-497 ARCHIV FUR DAS EISENHUTTENWESEN, 54, 12, 491-497 ARCHIV FUR DAS EISENHUTTENWESEN, 54, 12, 491-497 1983 ドイツ語 研究論文(学術雑誌) 公開
Natsuo Hatta, Hirohiko Takuda, Jun-ichi Kokado Natsuo Hatta, Hirohiko Takuda, Jun-ichi Kokado Natsuo Hatta, Hirohiko Takuda, Jun-ichi Kokado EXAMINATION FOR EFFECT OF PASS SCHEDULE ON ENERGY CONSUMPTION IN ROLLING PROCESS. EXAMINATION FOR EFFECT OF PASS SCHEDULE ON ENERGY CONSUMPTION IN ROLLING PROCESS. EXAMINATION FOR EFFECT OF PASS SCHEDULE ON ENERGY CONSUMPTION IN ROLLING PROCESS. Memoirs of the Faculty of Engineering, Kyoto University, 45, pt 3, 17-34 Memoirs of the Faculty of Engineering, Kyoto University, 45, pt 3, 17-34 Memoirs of the Faculty of Engineering, Kyoto University, 45, pt 3, 17-34 1983 英語 公開
宅田 裕彦 宅田 裕彦 スラブの幅大圧下圧延におけるロール径および板幅の圧延特性に及ぼす影響 スラブの幅大圧下圧延におけるロール径および板幅の圧延特性に及ぼす影響 塑性と加工,24/274 塑性と加工,24/274 1983 日本語 公開
宅田 裕彦 宅田 裕彦 幅大圧下圧延における内部応力特性 幅大圧下圧延における内部応力特性 塑性と加工,24/273 塑性と加工,24/273 1983 日本語 公開
Natsuo Hatta, Jun-ichi Kokado, Koichi Hanasaki, Hirohiko Takuda, Masaaharu Nakazawa Natsuo Hatta, Jun-ichi Kokado, Koichi Hanasaki, Hirohiko Takuda, Masaaharu Nakazawa Natsuo Hatta, Jun-ichi Kokado, Koichi Hanasaki, Hirohiko Takuda, Masaaharu Nakazawa EFFECT OF WATER FLOW RATE ON COOLING CAPACITY OF LAMINAR FLOW FOR HOT STEEL PLATE. EFFECT OF WATER FLOW RATE ON COOLING CAPACITY OF LAMINAR FLOW FOR HOT STEEL PLATE. EFFECT OF WATER FLOW RATE ON COOLING CAPACITY OF LAMINAR FLOW FOR HOT STEEL PLATE. Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 68, 8, 974-981 Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 68, 8, 974-981 Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 68, 8, 974-981 1982 英語 公開

  • <<
  • >>
  • 表示
タイトル言語:
Misc
著者 著者(日本語) 著者(英語) タイトル タイトル(日本語) タイトル(英語) 書誌情報等 書誌情報等(日本語) 書誌情報等(英語) 出版年月 査読の有無 記述言語 掲載種別 公開
浜孝之, 浦谷政翔, 田中悠貴, 田中努, 西村崇, 藤本仁, 宅田裕彦 浜孝之, 浦谷政翔, 田中悠貴, 田中努, 西村崇, 藤本仁, 宅田裕彦 HAMA TAKAYUKI, URATANI MASATO, TANAKA YUKI, TANAKA TSUTOMU, NISHIMURA TAKASHI, FUJIMOTO HITOSHI, TAKUDA HIROHIKO マグネシウム合金圧延板の交差効果に関する結晶塑性有限要素解析 マグネシウム合金圧延板の交差効果に関する結晶塑性有限要素解析 マグネシウム合金圧延板の交差効果に関する結晶塑性有限要素解析 塑性加工連合講演会講演論文集, 65th, 303-304 塑性加工連合講演会講演論文集, 65th, 303-304 塑性加工連合講演会講演論文集, 65th, 303-304 2014/09/22 日本語 公開
浜孝之, 小吹晃弘, 長尾洋孝, 田中努, 西村崇, 藤本仁, 宅田裕彦 浜孝之, 小吹晃弘, 長尾洋孝, 田中努, 西村崇, 藤本仁, 宅田裕彦 HAMA TAKAYUKI, KOBUKI AKIHIRO, NAGAO HIROTAKA, TANAKA TSUTOMU, NISHIMURA TAKASHI, FUJIMOTO HITOSHI, TAKUDA HIROHIKO 種々の負荷経路における純チタン板の変形挙動 種々の負荷経路における純チタン板の変形挙動 種々の負荷経路における純チタン板の変形挙動 塑性加工連合講演会講演論文集, 65th, 311-312 塑性加工連合講演会講演論文集, 65th, 311-312 塑性加工連合講演会講演論文集, 65th, 311-312 2014/09/22 日本語 公開
窪田紘明, 富澤淳, 山本憲司, 岡田信宏, 浜孝之, 宅田裕彦 窪田紘明, 富澤淳, 山本憲司, 岡田信宏, 浜孝之, 宅田裕彦 KUBOTA HIROAKI, TOMIZAWA ATSUSHI, YAMAMOTO KENJI, OKADA NOBUHIRO, HAMA TAKAYUKI, TAKUDA HIROHIKO 高周波誘導加熱の温度分布と金属組織変化を考慮した熱変形解析―3次元熱間曲げ焼入れ(3DQ)量産加工技術の開発 第6報― 高周波誘導加熱の温度分布と金属組織変化を考慮した熱変形解析―3次元熱間曲げ焼入れ(3DQ)量産加工技術の開発 第6報― 高周波誘導加熱の温度分布と金属組織変化を考慮した熱変形解析―3次元熱間曲げ焼入れ(3DQ)量産加工技術の開発 第6報― 塑性加工連合講演会講演論文集, 65th, 147-148 塑性加工連合講演会講演論文集, 65th, 147-148 塑性加工連合講演会講演論文集, 65th, 147-148 2014/09/22 日本語 公開
和田学, 割鞘美和, 浜孝之, 宅田裕彦, 栗山幸久, 樋渡俊二 和田学, 割鞘美和, 浜孝之, 宅田裕彦, 栗山幸久, 樋渡俊二 WADA MANABU, WARIZAYA MIWA, HAMA TAKAYUKI, TAKUDA HIROHIKO, KURIYAMA YUKIHISA, HIWATASHI SHUNJI 単スタンドのロール成形におけるひずみ経路―ロール成形が材料特性に及ぼす影響 第1報― 単スタンドのロール成形におけるひずみ経路―ロール成形が材料特性に及ぼす影響 第1報― 単スタンドのロール成形におけるひずみ経路―ロール成形が材料特性に及ぼす影響 第1報― 塑性加工連合講演会講演論文集, 65th, 161-162 塑性加工連合講演会講演論文集, 65th, 161-162 塑性加工連合講演会講演論文集, 65th, 161-162 2014/09/22 日本語 公開
浜孝之, 宅田裕彦 浜孝之, 宅田裕彦 HAMA TAKAYUKI, TAKUDA HIROHIKO 結晶塑性有限要素法によるマグネシウム合金板の変形解析に及ぼす潜在硬化の影響 結晶塑性有限要素法によるマグネシウム合金板の変形解析に及ぼす潜在硬化の影響 結晶塑性有限要素法によるマグネシウム合金板の変形解析に及ぼす潜在硬化の影響 塑性加工連合講演会講演論文集, 65th, 305-306 塑性加工連合講演会講演論文集, 65th, 305-306 塑性加工連合講演会講演論文集, 65th, 305-306 2014/09/22 日本語 公開
白砂大和, 藤本仁, 浜孝之, 宅田裕彦 白砂大和, 藤本仁, 浜孝之, 宅田裕彦 SHIRAMASA YAMATO, FUJIMOTO HITOSHI, HAMA TAKAYUKI, TAKUDA HIROHIKO 移動平板へ衝突するパイプラミナー流の流動特性および熱流束分布 移動平板へ衝突するパイプラミナー流の流動特性および熱流束分布 移動平板へ衝突するパイプラミナー流の流動特性および熱流束分布 材料とプロセス(CD-ROM), 27, 2, ROMBUNNO.197 材料とプロセス(CD-ROM), 27, 2, ROMBUNNO.197 材料とプロセス(CD-ROM), 27, 2, ROMBUNNO.197 2014/09/01 日本語 公開
浜孝之, 田中悠貴, 浦谷政翔, 田中努, 西村崇, 藤本仁, 宅田裕彦 浜孝之, 田中悠貴, 浦谷政翔, 田中努, 西村崇, 藤本仁, 宅田裕彦 HAMA TAKAYUKI, TANAKA YUKI, URATANI MASATO, TANAKA TSUTOMU, NISHIMURA TAKASHI, FUJIMOTO HITOSHI, TAKUDA HIROHIKO 圧縮予ひずみを受けるマグネシウム合金圧延板における交差効果 圧縮予ひずみを受けるマグネシウム合金圧延板における交差効果 圧縮予ひずみを受けるマグネシウム合金圧延板における交差効果 塑性加工春季講演会講演論文集, 2014, 293-294 塑性加工春季講演会講演論文集, 2014, 293-294 塑性加工春季講演会講演論文集, 2014, 293-294 2014/05/20 日本語 公開
浜孝之, 松代亮吾, 口ノ町陽太, 藤本仁, 宅田裕彦 浜孝之, 松代亮吾, 口ノ町陽太, 藤本仁, 宅田裕彦 HAMA TAKAYUKI, MATSUSHIRO RYOGO, KUCHINOMACHI YOTA, FUJIMOTO HITOSHI, TAKUDA HIROHIKO 各種金属板における除荷時変形挙動 各種金属板における除荷時変形挙動 各種金属板における除荷時変形挙動 材料とプロセス(CD-ROM), 27, 1, ROMBUNNO.179 材料とプロセス(CD-ROM), 27, 1, ROMBUNNO.179 材料とプロセス(CD-ROM), 27, 1, ROMBUNNO.179 2014/03/01 日本語 公開
尾花航, 藤本仁, 浜孝之, 宅田裕彦, 岡本隆彦 尾花航, 藤本仁, 浜孝之, 宅田裕彦, 岡本隆彦 OBANA WATARU, FUJIMOTO HITOSHI, HAMA TAKAYUKI, TAKUDA HIROHIKO, OKAMOTO TAKAHIKO 固体面に衝突するエマルション液滴の変形挙動 固体面に衝突するエマルション液滴の変形挙動 固体面に衝突するエマルション液滴の変形挙動 材料とプロセス(CD-ROM), 27, 1, ROMBUNNO.151 材料とプロセス(CD-ROM), 27, 1, ROMBUNNO.151 材料とプロセス(CD-ROM), 27, 1, ROMBUNNO.151 2014/03/01 日本語 公開
Takayuki Hama, Keisuke Kojima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Keisuke Kojima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Keisuke Kojima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda Variation of lubrication condition during sheet hydroforming Variation of lubrication condition during sheet hydroforming Variation of lubrication condition during sheet hydroforming 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 81, 1029-1034 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 81, 1029-1034 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 81, 1029-1034 2014 英語 公開
浜孝之, 宅田裕彦 浜孝之, 宅田裕彦 HAMA TAKAYUKI, TAKUDA HIROHIKO マグネシウム合金板における反転負荷時の加工硬化挙動に関する結晶塑性有限要素解析 マグネシウム合金板における反転負荷時の加工硬化挙動に関する結晶塑性有限要素解析 マグネシウム合金板における反転負荷時の加工硬化挙動に関する結晶塑性有限要素解析 塑性加工連合講演会講演論文集, 64th, 283-284 塑性加工連合講演会講演論文集, 64th, 283-284 塑性加工連合講演会講演論文集, 64th, 283-284 2013/10/15 日本語 公開
Hitoshi Fujimoto, Ryota Doi, Tomohiro Ogihara, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Ryota Doi, Tomohiro Ogihara, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Ryota Doi, Tomohiro Ogihara, Takayuki Hama, Hirohiko Takuda EXPERIMENTAL STUDY ON OBLIQUE COLLISIONS OF WATER DROPLETS WITH HOT SOLID EXPERIMENTAL STUDY ON OBLIQUE COLLISIONS OF WATER DROPLETS WITH HOT SOLID EXPERIMENTAL STUDY ON OBLIQUE COLLISIONS OF WATER DROPLETS WITH HOT SOLID PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2010, VOL 7, PTS A AND B, 7, PARTS A AND B, 1653-1662 PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2010, VOL 7, PTS A AND B, 7, PARTS A AND B, 1653-1662 PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2010, VOL 7, PTS A AND B, 7, PARTS A AND B, 1653-1662 2012 英語 公開
Takayuki Hama, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Hitoshi Fujimoto, Hirohiko Takuda Prediction of Yield Loci for a Magnesium Alloy Sheet using Crystal-Plasticity Finite-Element Method Prediction of Yield Loci for a Magnesium Alloy Sheet using Crystal-Plasticity Finite-Element Method Prediction of Yield Loci for a Magnesium Alloy Sheet using Crystal-Plasticity Finite-Element Method 8TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET 2011), PTS A AND B, 1383, 314-321 8TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET 2011), PTS A AND B, 1383, 314-321 8TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET 2011), PTS A AND B, 1383, 314-321 2011 英語 公開
Takayuki Hama, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Hitoshi Fujimoto, Hirohiko Takuda T. Hama, H. Fujimoto, H. Takuda Crystal plasticity finite element analysis of loading-unloading behaviour in magnesium alloy sheet Crystal plasticity finite element analysis of loading-unloading behaviour in magnesium alloy sheet Crystal plasticity finite element analysis of loading-unloading behaviour in magnesium alloy sheet AIP Conference Proceedings, 1252, 802-809 AIP Conference Proceedings, 1252, 802-809 AIP Conference Proceedings, 1252, 802-809 2010/09/03 英語 公開
Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda Outflow characteristics of a pressure medium during square- Cup sheet hydroforming Outflow characteristics of a pressure medium during square- Cup sheet hydroforming Outflow characteristics of a pressure medium during square- Cup sheet hydroforming 9th International Conference on Technology of Plasticity, ICTP 2008, 478-483 9th International Conference on Technology of Plasticity, ICTP 2008, 478-483 9th International Conference on Technology of Plasticity, ICTP 2008, 478-483 2008/01/01 公開
Hitoshi Fujimoto, Shinya Dejima, Albert Y. Tong, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Shinya Dejima, Albert Y. Tong, Takayuki Hama, Hirohiko Takuda Hitoshi Fujimoto, Shinya Dejima, Albert Y. Tong, Takayuki Hama, Hirohiko Takuda Numerical analysis of hydrodynamics and heat transfer of a free surface circular jet impinging onto a substrate Numerical analysis of hydrodynamics and heat transfer of a free surface circular jet impinging onto a substrate Numerical analysis of hydrodynamics and heat transfer of a free surface circular jet impinging onto a substrate PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 8, PTS A AND B, 8 PART B, 1117-1124 PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 8, PTS A AND B, 8 PART B, 1117-1124 PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 8, PTS A AND B, 8 PART B, 1117-1124 2008 英語 公開
Takayuki Hama, Cristian Teodosiu, Cristian Teodosiu, Akitake Makinouchi, Hitoshi Fujimoto, Hirohiko Takuda Takayuki Hama, Cristian Teodosiu, Cristian Teodosiu, Akitake Makinouchi, Hitoshi Fujimoto, Hirohiko Takuda T. Hama, C. Teodosiu, A. Makinouchi, H. Fujimoto, H. Takuda Springback simulation of high strength steel sheet using local interpolation for tool surfaces Springback simulation of high strength steel sheet using local interpolation for tool surfaces Springback simulation of high strength steel sheet using local interpolation for tool surfaces AIP Conference Proceedings, 908, 805-810 AIP Conference Proceedings, 908, 805-810 AIP Conference Proceedings, 908, 805-810 2007/08/03 英語 公開
Takayuki Hama, Masato Takamura, Cristian Teodosiu, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda Takayuki Hama, Masato Takamura, Cristian Teodosiu, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda T. Hama, M. Takamura, C. Teodosiu, A. Makinouchi, H. Takuda Finite element simulation of sheet metal forming process using local interpolation for tool surfaces Finite element simulation of sheet metal forming process using local interpolation for tool surfaces Finite element simulation of sheet metal forming process using local interpolation for tool surfaces AIP Conference Proceedings, 778 A, 185-190 AIP Conference Proceedings, 778 A, 185-190 AIP Conference Proceedings, 778 A, 185-190 2005/08/05 英語 公開
Hitoshi Fujimoto, Natsuo Hatta, Hirohiko Takuda Hitoshi Fujimoto, Natsuo Hatta, Hirohiko Takuda Hitoshi Fujimoto, Natsuo Hatta, Hirohiko Takuda Collision behavior of a water droplet with a hot surface Collision behavior of a water droplet with a hot surface Collision behavior of a water droplet with a hot surface American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 244, 159-166 American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 244, 159-166 American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 244, 159-166 1997/12/01 公開

  • <<
  • >>
  • 表示
タイトル言語:
学術賞等
賞の名称(日本語) 賞の名称(英語) 授与組織名(日本語) 授与組織名(英語) 年月
日本塑性加工学会 新進賞 社団法人 日本塑性加工学会 1984
日本塑性加工学会 会田技術奨励賞 社団法人 日本塑性加工学会 1997
日本塑性加工学会 学会大賞 一般社団法人 日本塑性加工学会 2012/06/07
澤村論文賞 一般社団法人 日本鉄鋼協会 2016/03/23
澤村論文賞 一般社団法人 日本鉄鋼協会 2018/03/19
外部資金:競争的資金 (科学研究費補助金)
種別 代表/分担 テーマ(日本語) テーマ(英語) 期間
基盤研究(C) 対向液圧成形における液圧分布の解明と有限要素解析への応用 2007〜2009
基盤研究(C) 代表 高延性を有する高強度電縫鋼管のロール成形法 2011〜2013
基盤研究(C) 代表 高精度な加工硬化特性評価に基づく高強度電縫鋼管の二次加工法の確立 (平成26年度分) 2014/04/01〜2015/03/31
基盤研究(C) 代表 高精度な加工硬化特性評価に基づく高強度電縫鋼管の二次加工法の確立 (平成27年度分) 2015/04/01〜2016/03/31
基盤研究(C) 代表 高精度な加工硬化特性評価に基づく高強度電縫鋼管の二次加工法の確立 (平成28年度分) 2016/04/01〜2017/03/31
基盤研究(C) 代表 デジタル画像相関法と結晶塑性解析を駆使した金属材料のマルチスケール変形挙動の解明 (平成29年度分) 2017/04/01〜2018/03/31
基盤研究(C) 代表 デジタル画像相関法と結晶塑性解析を駆使した金属材料のマルチスケール変形挙動の解明 (平成30年度分) 2018/04/01〜2019/03/31
基盤研究(C) 代表 デジタル画像相関法と結晶塑性解析を駆使した金属材料のマルチスケール変形挙動の解明 (2019年度分) 2019/04/01〜2020/03/31
外部資金:競争的資金 (科学研究費補助金以外)
制度名 代表者名 研究課題(日本語) 研究課題(英語) 期間
板材成形における成形限界予測への延性破壊条件式の適用 Prediction of Forming Limit in Sheet Metal Forming Using Ductile Fracture Criterion
マグネシウム合金板の成形性に関する研究 Study on Formability of Magnesium Alloy Sheet
担当科目
講義名(日本語) 講義名(英語) 開講期 学部/研究科 年度
数値加工プロセス Numerical Approach to Working Processes 前期 エネルギー科学研究科 2011/04〜2012/03
計算物理 Computational Physics 後期 エネルギー科学研究科 2011/04〜2012/03
資源エネルギーシステム学特論 Resource and Energy System, Adv. 前期 エネルギー科学研究科 2011/04〜2012/03
数値計算法及び演習 後期 工学部 2011/04〜2012/03
エネルギー応用科学通論 エネルギー科学研究科
地球工学総論 工学部
流体力学 工学部
材料と塑性 工学部
熱流体工学 工学部
先端資源エネルギー工学 工学部
資源工学材料実験 工学部
地球工学デザイン 工学部
ポケットゼミ 全学共通科目
地球と資源エネルギー Earth and energy resources 前期 全学共通科目 2011/04〜2012/03
流体力学及び演習 前期 工学部 2011/04〜2012/03
先端資源エネルギー工学 Advances in Earth and Energy Resources Technology 後期 工学部 2012/04〜2013/03
地球と資源エネルギー Earth and energy resources 前期 全学共通科目 2012/04〜2013/03
エネルギー応用科学通論 Introduction to Energy Science and Technology 前期 エネルギー科学研究科 2012/04〜2013/03
数値加工プロセス Numerical Approach to Working Processes 前期 エネルギー科学研究科 2012/04〜2013/03
数値計算法及び演習 Numerical Methods for Engineering and Exercises 後期 工学部 2012/04〜2013/03
材料と塑性 Materials and Plasticity 後期 工学部 2012/04〜2013/03
流体力学 Fluid Mechanics 前期 工学部 2012/04〜2013/03
流体力学及び演習 Fluid Mechanics and Exercises 前期 工学部 2012/04〜2013/03
熱流体工学 Thermo-Fluid Engineeering 後期 工学部 2012/04〜2013/03
計算物理 Computational Physics 後期 エネルギー科学研究科 2012/04〜2013/03
資源エネルギーシステム学特論 Resource and Energy System, Adv. 前期 エネルギー科学研究科 2012/04〜2013/03
資源工学材料実験 Materials in Earth Resources Engineering,Laboratory 後期 工学部 2012/04〜2013/03
流体力学及び演習 Fluid Mechanics and Exercises 前期 工学部 2013/04〜2014/03
先端資源エネルギー工学 Advances in Earth and Energy Resources Technology 後期 工学部 2013/04〜2014/03
熱流体工学 Thermo-Fluid Engineeering 後期 工学部 2013/04〜2014/03
資源工学材料実験 Materials in Earth Resources Engineering,Laboratory 後期 工学部 2013/04〜2014/03
流体力学 Fluid Mechanics 前期 工学部 2013/04〜2014/03
材料と塑性 Materials and Plasticity 後期 工学部 2013/04〜2014/03
数値計算法及び演習 Numerical Methods for Engineering and Exercises 後期 工学部 2013/04〜2014/03
エネルギー応用科学通論 Introduction to Energy Science and Technology 前期 エネルギー科学研究科 2013/04〜2014/03
計算物理 Computational Physics 後期 エネルギー科学研究科 2013/04〜2014/03
資源エネルギーシステム学特論 Resource and Energy System, Adv. 前期 エネルギー科学研究科 2013/04〜2014/03
先端資源エネルギー工学 Advances in Earth and Energy Resources Technology 後期 工学部 2014/04〜2015/03
熱流体工学 Thermo-Fluid Engineeering 後期 工学部 2014/04〜2015/03
資源工学材料実験 Materials in Earth Resources Engineering,Laboratory 後期 工学部 2014/04〜2015/03
流体力学 Fluid Mechanics 前期 工学部 2014/04〜2015/03
材料と塑性 Materials and Plasticity 後期 工学部 2014/04〜2015/03
数値計算法及び演習 Numerical Methods for Engineering and Exercises 後期 工学部 2014/04〜2015/03
エネルギー応用科学通論 Introduction to Energy Science and Technology 前期 エネルギー科学研究科 2014/04〜2015/03
数値加工プロセス Numerical Approach to Working Processes 前期 エネルギー科学研究科 2014/04〜2015/03
計算物理 Computational Physics 後期 エネルギー科学研究科 2014/04〜2015/03
資源エネルギーシステム学特論 Resource and Energy System, Adv. 前期 エネルギー科学研究科 2014/04〜2015/03
地球と資源エネルギー Earth and Energy Resources 前期 全学共通科目 2014/04〜2015/03
先端資源エネルギー工学 Advances in Earth and Energy Resources Technology 後期 工学部 2015/04〜2016/03
地球と資源エネルギー Earth and Energy Resources 前期 全学共通科目 2015/04〜2016/03
エネルギー応用科学通論 Introduction to Energy Science and Technology 前期 エネルギー科学研究科 2015/04〜2016/03
数値計算法及び演習 Numerical Methods for Engineering and Exercises 後期 工学部 2015/04〜2016/03
材料と塑性 Materials and Plasticity 後期 工学部 2015/04〜2016/03
流体力学 Fluid Mechanics 前期 工学部 2015/04〜2016/03
熱流体工学 Thermo-Fluid Engineeering 後期 工学部 2015/04〜2016/03
計算物理 Computational Physics 後期 エネルギー科学研究科 2015/04〜2016/03
資源エネルギーシステム学特論 Resource and Energy System, Adv. 前期 エネルギー科学研究科 2015/04〜2016/03
資源工学材料実験 Materials in Earth Resources Engineering,Laboratory 後期 工学部 2015/04〜2016/03
先端資源エネルギー工学 Advances in Earth and Energy Resources Technology 後期 工学部 2016/04〜2017/03
エネルギー応用科学通論 Introduction to Energy Science and Technology 前期 エネルギー科学研究科 2016/04〜2017/03
数値加工プロセス Numerical Approach to Working Processes 前期 エネルギー科学研究科 2016/04〜2017/03
数値計算法及び演習 Numerical Methods for Engineering and Exercises 後期 工学部 2016/04〜2017/03
材料と塑性 Materials and Plasticity 後期 工学部 2016/04〜2017/03
流体力学 Fluid Mechanics 前期 工学部 2016/04〜2017/03
熱流体工学 Thermo-Fluid Engineeering 後期 工学部 2016/04〜2017/03
資源エネルギーシステム学特論 Resource and Energy System, Adv. 前期 エネルギー科学研究科 2016/04〜2017/03
資源工学材料実験 Materials in Earth Resources Engineering,Laboratory 後期 工学部 2016/04〜2017/03
先端資源エネルギー工学 Advances in Earth and Energy Resources Technology 後期 工学部 2017/04〜2018/03
地球工学デザインB Design Exercise for Global Engineering B 前期 工学部 2017/04〜2018/03
エネルギー応用科学通論 Introduction to Energy Science and Technology 前期 エネルギー科学研究科 2017/04〜2018/03
数値計算法及び演習 Numerical Methods for Engineering and Exercises 後期 工学部 2017/04〜2018/03
材料と塑性 Materials and Plasticity 後期 工学部 2017/04〜2018/03
流体力学 Fluid Mechanics 前期 工学部 2017/04〜2018/03
熱流体工学 Thermo-Fluid Engineeering 後期 工学部 2017/04〜2018/03
特別研究 Graduation Thesis 通年集中 工学部 2017/04〜2018/03
計算物理 Computational Physics 後期 エネルギー科学研究科 2017/04〜2018/03
資源エネルギーシステム学特論 Resource and Energy System, Adv. 前期 エネルギー科学研究科 2017/04〜2018/03
先端資源エネルギー工学 Advances in Earth and Energy Resources Technology 後期 工学部 2018/04〜2019/03
地球工学デザインB Design Exercise for Global Engineering B 前期 工学部 2018/04〜2019/03
工学倫理 Engineering Ethics 前期 工学部 2018/04〜2019/03
エネルギー応用科学通論 Introduction to Energy Science and Technology 前期 エネルギー科学研究科 2018/04〜2019/03
数値加工プロセス Numerical Approach to Working Processes 前期 エネルギー科学研究科 2018/04〜2019/03
数値計算法及び演習 Numerical Methods for Engineering and Exercises 後期 工学部 2018/04〜2019/03
材料と塑性 Materials and Plasticity 後期 工学部 2018/04〜2019/03
流体力学 Fluid Mechanics 前期 工学部 2018/04〜2019/03
熱流体工学 Thermo-Fluid Engineeering 後期 工学部 2018/04〜2019/03
資源エネルギーシステム学特論 Resource and Energy System, Adv. 前期 エネルギー科学研究科 2018/04〜2019/03
先端資源エネルギー工学 Advances in Earth and Energy Resources Technology 後期 工学部 2019/04〜2020/03
地球工学デザインB Design Exercise for Global Engineering B 前期 工学部 2019/04〜2020/03
工学倫理 Engineering Ethics 前期 工学部 2019/04〜2020/03
エネルギー応用科学通論 Introduction to Energy Science and Technology 前期 エネルギー科学研究科 2019/04〜2020/03
材料と塑性 Materials and Plasticity 後期 工学部 2019/04〜2020/03
流体力学 Fluid Mechanics 前期 工学部 2019/04〜2020/03
熱流体工学 Thermo-Fluid Engineeering 後期 工学部 2019/04〜2020/03
資源エネルギーシステム学特論 Resource and Energy System, Adv. 前期 エネルギー科学研究科 2019/04〜2020/03
先端資源エネルギー工学 Advanced Resources and Energy Engineering 後期 工学部 2020/04〜2021/03
地球工学デザインB Design Exercise for Global Engineering B 前期 工学部 2020/04〜2021/03
エネルギー応用科学通論 Introduction to Energy Science and Technology 前期 エネルギー科学研究科 2020/04〜2021/03
数値加工プロセス Numerical Approach to Working Processes 前期 エネルギー科学研究科 2020/04〜2021/03
材料と塑性 Materials and Plasticity 後期 工学部 2020/04〜2021/03
流体力学 Fluid Mechanics 前期 工学部 2020/04〜2021/03
熱流体工学 Thermo-Fluid Engineeering 後期 工学部 2020/04〜2021/03
資源エネルギーシステム学特論 Resource and Energy System, Adv. 前期 エネルギー科学研究科 2020/04〜2021/03

  • <<
  • >>
  • 表示
博士学位審査
学位取得者名 学位論文タイトル 役割 年月
大屋 正義 Stability of superconducting magnets cooled by superfluid helium (超流動ヘリウム冷却超電導マグネットの安定性) 副査 2006/03/23
袴田 昌高 FABRICATION AND PROPERTIES OF MICROPOROUS AND NANOPOROUS METALS(マイクロポーラスおよびナノポーラス金属の創製と特性評価) 副査 2007/03/23
濱  勝彦 Film Boiling Heat Transfer in Various Liquids Under Natural Convection and Forced Convection Conditions (自然対流及び強制対流の状態での種々の液体における膜沸騰熱伝達の研究) 副査 2006/03/23
長谷川 将克 Thermodynamic Studies on Metallic and Oxide Solutions for Environmental-friendly Iron and Steelmaking (環境調和型鉄鋼製錬のための金属及び酸化物融体の熱力学) 副査 2007/03/23
湯浅 元仁 ATOMIC AND ELECTRONIC STUDIES ON GRAIN BOUNDARY PLASTICITY AND FRACTURE IN METALS(金属材料における粒界塑性および粒界破壊に関する原子・電子論的研究) 副査 2012/03/26
井口 敬之助 高強度電縫鋼管のロール成形における変形挙動の解明と工程の最適化に関する研究 主査 2012/09/24
窪田 紘明 自動車用中空構造部材における高強度化と形状自由度向上に関する研究 主査 2015/03/23
西村 隆一 高強度鋼板のフランジアップ成形に関する研究 主査 2017/09/25
久保 雅寛 薄鋼板のプレス成形品の表面品位向上に関する研究 主査 2018/09/25
宮澤 直己 Atomic and electronic analysis of interactions between nanoporous Auand proteins(ナノポーラス金とタンパク質の電子・原子論的相互作用解析) 副査 2019/03/25
藤村 隆志 鉄道車両用車輪のリム部に発生する損傷の分析とその抑制に寄与する材料および製造プロセスの最適化に関する研究 主査 2019/09/24

  • <<
  • >>
  • 表示
全学運営(役職等)
役職名 期間
産官学連携本部運営協議会 委員 2010/04/01〜2011/03/31
核燃料物質管理委員会 委員 2010/04/01〜2011/03/31
保健衛生委員会 委員 2010/04/01〜2011/03/31
全学情報セキュリティ委員会 委員 2010/04/01〜2011/03/31
大学評価委員会 委員 2010/04/01〜2011/03/31
京都大学奨学金返還免除候補者選考委員会 委員 2010/10/01〜2011/03/31
宇治キャンパス等整備専門委員会 委員 2010/10/01〜2011/03/31
施設整備委員会 委員 2010/10/01〜2011/03/31
教育制度委員会 委員 2008/04/01〜2010/03/31
全学共通教育委員会 委員 2010/04/01〜2011/03/31
教育研究評議会 評議員 2008/04/01〜2014/03/31
経営協議会委員 2010/04/01〜2010/09/30
京都大学奨学金返還免除候補者選考委員会 委員 2011/04/01〜2013/03/31
京都大学施設整備委員会 委員 2011/04/01〜2012/03/31
全学共通教育委員会 委員 2011/04/01〜2013/03/31
全学情報セキュリティ委員会 委員 2011/04/01〜2013/03/31
利益相反審査委員会 委員 2011/04/01〜2012/03/31
大学評価委員会 委員 2011/04/01〜2013/03/31
産官学連携本部運営協議会 2011/04/01〜2013/03/31
研究科長部会 2011/04/01〜2012/03/31
企画委員会 委員 2012/04/01〜2013/03/31
戦略定員検討委員会 委員 2012/04/01〜2013/03/31
研究科長部会 2012/05/01〜2013/03/31
企画委員会 委員 2012/10/01〜2014/09/30
研究科長部会議 2013/04/01〜2014/03/31
産官学連携本部運営協議会 2013/04/01〜2014/03/31
全学情報セキュリティ委員会 委員 2010/04/01〜2014/03/31
大学評価委員会 委員 2010/04/01〜2014/03/31
博士課程教育リーディングプログラム運営会議 委員 2010/04/01〜2014/03/31
部局長会議 2010/04/01〜2014/03/31
原子力研究整備委員会 委員 2013/04/01〜2015/03/31
宇治おうばくプラザ運営委員会 4号委員
教育研究組織改革専門委員会 委員 2012/07/02〜2014/03/31
人権委員会 委員 2015/04/01〜2017/03/31
エネルギー科学系長 2016/04/01〜2018/03/31
エネルギー科学研究科 研究科長 2010/04/01〜2014/03/31
エネルギー科学系長 2016/04/01〜2020/03/31

  • <<
  • >>
  • 表示
部局運営(役職等)
役職名 期間
工学部教育制度委員
制規委員会 委員 2014/04/01〜2016/03/31
副研究科長 2008/04/01〜2010/03/31
基盤整備委員会 委員 2014/04/01〜2016/03/31
外部資金等審査委員会 委員 2008/04/01〜2014/03/31
安全衛生委員会 委員 2010/04/01〜2014/03/31
情報セキュリティ委員会 委員 2007/04/01〜2014/03/31
放射線障害防止委員会 委員 2011/04/01〜2014/03/31
自己点検・評価委員会 委員 2006/04/01〜2014/03/31
人権委員会 委員 2015/04/01〜2017/03/31
入試委員会 委員 2016/04/01〜2017/03/31
エネルギー応用科学専攻長 2016/04/01〜2017/03/31
情報セキュリティ委員会 委員 2016/04/01〜2017/03/31
自己点検・評価委員会 委員 2016/04/01〜2017/03/31
先端エネルギー科学研究教育センター運営委員会 委員 2016/04/01〜2017/03/31
国際化・留学生対応委員会 委員 2016/04/01〜2017/03/31
博士後期課程についての検討会 委員 2016/04/01〜2017/03/31
制規委員会 委員 2020/04/01〜2021/03/31
基盤整備委員会 委員 2020/04/01〜2021/03/31

  • <<
  • >>
  • 表示