Takayuki HAMA |
Takayuki HAMA |
Takayuki HAMA |
Crystal Plasticity Modeling for Non-ferrous Metals and its Engineering Applications  |
Crystal Plasticity Modeling for Non-ferrous Metals and its Engineering Applications  |
Crystal Plasticity Modeling for Non-ferrous Metals and its Engineering Applications  |
ISIJ International, 90, 9, 1849-1862 |
ISIJ International, 90, 9, 1849-1862 |
ISIJ International, 90, 9, 1849-1862 |
2020/09 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Yurina Suzuki, Kota Ueno, Kodai Murasawa, Yoshinori Kusuda, Masato Takamura, Tomoyuki Hakoyama, Takayuki Hama, Shinsuke Suzuki |
Yurina Suzuki, Kota Ueno, Kodai Murasawa, Yoshinori Kusuda, Masato Takamura, Tomoyuki Hakoyama, Takayuki Hama, Shinsuke Suzuki |
Yurina Suzuki, Kota Ueno, Kodai Murasawa, Yoshinori Kusuda, Masato Takamura, Tomoyuki Hakoyama, Takayuki Hama, Shinsuke Suzuki |
Effect of surface area of grain boundaries on stress relaxation behavior in pure copper over wide range of grain sizes |
Effect of surface area of grain boundaries on stress relaxation behavior in pure copper over wide range of grain sizes |
Effect of surface area of grain boundaries on stress relaxation behavior in pure copper over wide range of grain sizes |
Materials Science and Engineering: A, 794, 139585-139585 |
Materials Science and Engineering: A, 794, 139585-139585 |
Materials Science and Engineering: A, 794, 139585-139585 |
2020/09 |
Refereed |
|
Research paper(scientific journal) |
Disclose to all |
Hama, T., Suzuki, T., Nakatsuji, Y., Sakai, T., and Takuda, H. |
Hama, T., Suzuki, T., Nakatsuji, Y., Sakai, T., and Takuda, H. |
Hama, T., Suzuki, T., Nakatsuji, Y., Sakai, T., and Takuda, H. |
Time-dependent springback of various sheet metals: an experimental study |
Time-dependent springback of various sheet metals: an experimental study |
Time-dependent springback of various sheet metals: an experimental study |
Materials Transactions, 61, 5, 941-947 |
Materials Transactions, 61, 5, 941-947 |
Materials Transactions, 61, 5, 941-947 |
2020/05 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
浜孝之 |
浜孝之 |
|
結晶塑性有限要素法によるマグネシウム合金板の変形挙動のモデリング  |
結晶塑性有限要素法によるマグネシウム合金板の変形挙動のモデリング  |
|
FORM TECH REVIEW, 29, 20-25 |
FORM TECH REVIEW, 29, 20-25 |
, 29, 20-25 |
2020/03 |
|
Japanese |
Research paper(research society, symposium, etc.) |
Disclose to all |
濵 孝之 |
濵 孝之 |
|
六方晶金属のための結晶塑性モデリングとその適用事例 |
六方晶金属のための結晶塑性モデリングとその適用事例 |
|
軽金属, 70, 24-32 |
軽金属, 70, 24-32 |
, 70, 24-32 |
2020/01 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
濵 孝之 |
濵 孝之 |
|
結晶塑性モデルによる純チタン板の塑性変形挙動の予測 |
結晶塑性モデルによる純チタン板の塑性変形挙動の予測 |
|
チタン, 67, 4, 284-289 |
チタン, 67, 4, 284-289 |
, 67, 4, 284-289 |
2019/10 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
Ma, C, Wang, H, Hama, T, Guo, X, Mao, X, Wang, J, Wu, P |
|
Ma, C, Wang, H, Hama, T, Guo, X, Mao, X, Wang, J, Wu, P |
Twinning and detwinning behaviors of commercially pure titanium sheets |
Twinning and detwinning behaviors of commercially pure titanium sheets |
Twinning and detwinning behaviors of commercially pure titanium sheets |
International Journal of Plasticity, 121, 261-279 |
International Journal of Plasticity, 121, 261-279 |
International Journal of Plasticity, 121, 261-279 |
2019/10 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
黒田充紀, 上森武, 浜孝之, 松野崇 |
黒田充紀, 上森武, 浜孝之, 松野崇 |
|
プロセッシング計算力学 |
プロセッシング計算力学 |
|
ぷらすとす, 2, 21, 573-578 |
ぷらすとす, 2, 21, 573-578 |
, 2, 21, 573-578 |
2019/09 |
|
Japanese |
|
Disclose to all |
桑原利彦, 石渡亮伸, 黒田充紀, 小泉隆行, 呉博尋, 瀧澤英男, 浜孝之, 濱崎洋, 吉田健吾, 柳本潤, 山中晃徳 |
桑原利彦, 石渡亮伸, 黒田充紀, 小泉隆行, 呉博尋, 瀧澤英男, 浜孝之, 濱崎洋, 吉田健吾, 柳本潤, 山中晃徳 |
|
「先進的多軸応力試験による鋼板成形の高度化」研究会活動報告 |
「先進的多軸応力試験による鋼板成形の高度化」研究会活動報告 |
|
ふぇらむ, 24, 32-41 |
ふぇらむ, 24, 32-41 |
, 24, 32-41 |
2019/09 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
Y. Suzuki, Y. Kusuda, K. Murasawa, M. Takamura, T. Hakoyama, T. Hama, S. Suzuki |
Y. Suzuki, Y. Kusuda, K. Murasawa, M. Takamura, T. Hakoyama, T. Hama, S. Suzuki |
|
Effect of Surface Area of Grain Boundaries on Internal Stress during Stress Relaxation in Pure Copper |
Effect of Surface Area of Grain Boundaries on Internal Stress during Stress Relaxation in Pure Copper |
Effect of Surface Area of Grain Boundaries on Internal Stress during Stress Relaxation in Pure Copper |
PRICM 10 Proceeding, 750-756 |
PRICM 10 Proceeding, 750-756 |
PRICM 10 Proceeding, 750-756 |
2019 |
Refereed |
English |
|
Disclose to all |
Fujimoto, H., Takeshita, H., Ashida, M., Obana, W., Hama, T., and Takuda, H. |
Fujimoto, H., Takeshita, H., Ashida, M., Obana, W., Hama, T., and Takuda, H. |
|
Photographic observations of the transient contact behavior of oil-in-water emulsion droplets impinging on a hot substrate |
Photographic observations of the transient contact behavior of oil-in-water emulsion droplets impinging on a hot substrate |
Photographic observations of the transient contact behavior of oil-in-water emulsion droplets impinging on a hot substrate |
ISIJ International, 59, 7, 1304-1313 |
ISIJ International, 59, 7, 1304-1313 |
ISIJ International, 59, 7, 1304-1313 |
2019 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Baudoin, P, Hama, T, Takuda, H |
|
Baudoin, P, Hama, T, Takuda, H |
Influence of critical resolved shear stress ratios on the response of a commercially pure titanium oligocrystal: crystal plasticity simulations and experiment |
Influence of critical resolved shear stress ratios on the response of a commercially pure titanium oligocrystal: crystal plasticity simulations and experiment |
Influence of critical resolved shear stress ratios on the response of a commercially pure titanium oligocrystal: crystal plasticity simulations and experiment |
International Journal of Plasticity, 115, 111-131 |
International Journal of Plasticity, 115, 111-131 |
International Journal of Plasticity, 115, 111-131 |
2019 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
黒田充紀, 眞山剛, 浜孝之 |
黒田充紀, 眞山剛, 浜孝之 |
|
プロセッシング計算力学 |
プロセッシング計算力学 |
|
ぷらすとす, 1, 9, 639-643 |
ぷらすとす, 1, 9, 639-643 |
, 1, 9, 639-643 |
2018/09 |
|
Japanese |
|
Disclose to all |
Hitoshi Fujimoto, Shogo Sakane, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Shogo Sakane, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Shogo Sakane, Takayuki Hama, Hirohiko Takuda |
Transient contact behavior of aqueous polymer solution droplets with transparent hot solid  |
Transient contact behavior of aqueous polymer solution droplets with transparent hot solid  |
Transient contact behavior of aqueous polymer solution droplets with transparent hot solid  |
Experimental Thermal and Fluid Science, 96, 1-10 |
Experimental Thermal and Fluid Science, 96, 1-10 |
Experimental Thermal and Fluid Science, 96, 1-10 |
2018/09/01 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Kubo, M, Hama, T, Tsunemi, Y, Nakazawa, Y, Takuda, H |
|
Kubo, M, Hama, T, Tsunemi, Y, Nakazawa, Y, Takuda, H |
Crystal plasticity finite-element analysis of surface roughening behavior in biaxial stretching of steel sheets  |
Crystal plasticity finite-element analysis of surface roughening behavior in biaxial stretching of steel sheets  |
Crystal plasticity finite-element analysis of surface roughening behavior in biaxial stretching of steel sheets  |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018),, 1063, 012131 |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018),, 1063, 012131 |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018),, 1063, 012131 |
2018/08 |
Refereed |
English |
|
Disclose to all |
Takamura, M, Murasawa, K, Kusuda, Y, Suzuki, Y, Hakoyama, T, Ikeda, Y, Otake, Y, Hama, T, Suzuki, S |
|
Takamura, M, Murasawa, K, Kusuda, Y, Suzuki, Y, Hakoyama, T, Ikeda, Y, Otake, Y, Hama, T, Suzuki, S |
Investigation on stress relaxation behavior of high-strength steel sheets based on elasto-viscoplasticity |
Investigation on stress relaxation behavior of high-strength steel sheets based on elasto-viscoplasticity |
Investigation on stress relaxation behavior of high-strength steel sheets based on elasto-viscoplasticity |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018), 1063, 012123 |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018), 1063, 012123 |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018), 1063, 012123 |
2018/08 |
Refereed |
English |
|
Disclose to all |
Hama, T, Sakai, T, Korkolis, Y.P, Takuda, H |
|
Hama, T, Sakai, T, Korkolis, Y.P, Takuda, H |
Crystal-plasticity finite-element simulation of time-dependent springback in a commercially-pure titanium sheet  |
Crystal-plasticity finite-element simulation of time-dependent springback in a commercially-pure titanium sheet  |
Crystal-plasticity finite-element simulation of time-dependent springback in a commercially-pure titanium sheet  |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018), 1063, 012122 |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018), 1063, 012122 |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018), 1063, 012122 |
2018/08 |
Refereed |
English |
|
Disclose to all |
Baudoin, P, Hama, T, Uchida, S, Takuda, H |
|
Baudoin, P, Hama, T, Uchida, S, Takuda, H |
Crystal plasticity analysis of the deformation of a grade 2 CP-Ti oligocrystal  |
Crystal plasticity analysis of the deformation of a grade 2 CP-Ti oligocrystal  |
Crystal plasticity analysis of the deformation of a grade 2 CP-Ti oligocrystal  |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018), 1063, 012048 |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018), 1063, 012048 |
Journal of Physics: Conf. Series (Proc. of NUMISHEET2018), 1063, 012048 |
2018/08 |
Refereed |
English |
|
Disclose to all |
Murasawa, K, Takamura, M, Kumagai, M, Ikeda, Y, Suzuki, H, Otake, Y, Hama, T, Suzuki, S |
|
Murasawa, K, Takamura, M, Kumagai, M, Ikeda, Y, Suzuki, H, Otake, Y, Hama, T, Suzuki, S |
Determination approach of dislocation density and crystallite size using a convolutional multiple whole profile software |
Determination approach of dislocation density and crystallite size using a convolutional multiple whole profile software |
Determination approach of dislocation density and crystallite size using a convolutional multiple whole profile software |
Materials Transactions, 59, 7, 1135-1141 |
Materials Transactions, 59, 7, 1135-1141 |
Materials Transactions, 59, 7, 1135-1141 |
2018/07 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Madhav Baral, Takayuki Hama, Erik Knudsen, Yannis P. Korkolis |
Madhav Baral, Takayuki Hama, Erik Knudsen, Yannis P. Korkolis |
Madhav Baral, Takayuki Hama, Erik Knudsen, Yannis P. Korkolis |
Plastic deformation of commercially-pure titanium: Experiments and modeling |
Plastic deformation of commercially-pure titanium: Experiments and modeling |
Plastic deformation of commercially-pure titanium: Experiments and modeling |
International Journal of Plasticity, 105, 164-194 |
International Journal of Plasticity, 105, 164-194 |
International Journal of Plasticity, 105, 164-194 |
2018/06/01 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Tomotaka Suzuki, Shinichi Hatakeyama, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Tomotaka Suzuki, Shinichi Hatakeyama, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Tomotaka Suzuki, Shinichi Hatakeyama, Hitoshi Fujimoto, Hirohiko Takuda |
Role of twinning on the stress and strain behaviors during reverse loading in rolled magnesium alloy sheets  |
Role of twinning on the stress and strain behaviors during reverse loading in rolled magnesium alloy sheets  |
Role of twinning on the stress and strain behaviors during reverse loading in rolled magnesium alloy sheets  |
Materials Science and Engineering A, 725, 8-18 |
Materials Science and Engineering A, 725, 8-18 |
Materials Science and Engineering A, 725, 8-18 |
2018/05/16 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
吉田健吾, 浜孝之, 山中晃德, 黒田充紀 |
吉田健吾, 浜孝之, 山中晃德, 黒田充紀 |
|
プロセッシング計算力学の深化と展望 |
プロセッシング計算力学の深化と展望 |
|
ぷらすとす, 1, 1, 66-71 |
ぷらすとす, 1, 1, 66-71 |
, 1, 1, 66-71 |
2018/01 |
|
Japanese |
|
Disclose to all |
Hama, T, Fujimoto, H, Takuda, H |
|
Hama, T, Fujimoto, H, Takuda, H |
Prediction of differential work-hardening behavior under biaxial tension of steel sheet using crystal plasticity models  |
Prediction of differential work-hardening behavior under biaxial tension of steel sheet using crystal plasticity models  |
Prediction of differential work-hardening behavior under biaxial tension of steel sheet using crystal plasticity models  |
Procedia Manufacturing, 15, 1808-1815 |
Procedia Manufacturing, 15, 1808-1815 |
Procedia Manufacturing, 15, 1808-1815 |
2018 |
Refereed |
English |
|
Disclose to all |
Kumagai, M, Uchida, T, Murasawa, K, Takamura, M, Ikeda, Y, Suzuki, H, Otake, Y, Hama, T, Suzuki, S |
|
Kumagai, M, Uchida, T, Murasawa, K, Takamura, M, Ikeda, Y, Suzuki, H, Otake, Y, Hama, T, Suzuki, S |
Convergence behavior in line profile analysis using convolutional multiple whole-profile software |
Convergence behavior in line profile analysis using convolutional multiple whole-profile software |
Convergence behavior in line profile analysis using convolutional multiple whole-profile software |
Materials Research Proceedings, 6, 57-62 |
Materials Research Proceedings, 6, 57-62 |
Materials Research Proceedings, 6, 57-62 |
2018 |
Refereed |
English |
|
Disclose to all |
BAUDOIN Pierre, HAMA Takayuki, UCHIDA Sohei, TAKUDA Hirohiko |
Pierre Baudoin, 浜 孝之, 内田 壮平, 宅田 裕彦 |
BAUDOIN Pierre, HAMA Takayuki, UCHIDA Sohei, TAKUDA Hirohiko |
Effect of CRSS ratio on heterogeneous deformation behavior of commercially pure titanium oligocrystal |
粗大結晶粒純チタン材の不均一変杉挙訓に及ぼすCRSS比の影響 |
Effect of CRSS ratio on heterogeneous deformation behavior of commercially pure titanium oligocrystal |
The Proceedings of the Materials and Mechanics Conference, 2018, 0, OS0111 |
M&M材料力学カンファレンス, 2018, 0, OS0111 |
The Proceedings of the Materials and Mechanics Conference, 2018, 0, OS0111 |
2018 |
Refereed |
Japanese |
|
Disclose to all |
Kenta Morisawa, Jun-Ya Nakahara, Keisuke Nagata, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda |
Kenta Morisawa, Jun-Ya Nakahara, Keisuke Nagata, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda |
Kenta Morisawa, Jun-Ya Nakahara, Keisuke Nagata, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda |
Boiling heat transfer characteristics of vertical water jet impinging on horizontally moving hot plate  |
Boiling heat transfer characteristics of vertical water jet impinging on horizontally moving hot plate  |
Boiling heat transfer characteristics of vertical water jet impinging on horizontally moving hot plate  |
ISIJ International, 58, 1, 140-145 |
ISIJ International, 58, 1, 140-145 |
ISIJ International, 58, 1, 140-145 |
2018 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
久保雅寛,中澤嘉明,浜孝之,宅田裕彦 |
久保雅寛,中澤嘉明,浜孝之,宅田裕彦 |
|
{001}結晶方位低減による極低炭素鋼板の耐表面荒れ性の向上 |
{001}結晶方位低減による極低炭素鋼板の耐表面荒れ性の向上 |
|
鉄と鋼, 104, 9, 501-508 |
鉄と鋼, 104, 9, 501-508 |
, 104, 9, 501-508 |
2018 |
Refereed |
Japanese |
|
Disclose to all |
Masahiro Kubo, Takayuki Hama, Yusuke Tsunemi, Yoshiaki Nakazawa, Hirohiko Takuda |
Masahiro Kubo, Takayuki Hama, Yusuke Tsunemi, Yoshiaki Nakazawa, Hirohiko Takuda |
Masahiro Kubo, Takayuki Hama, Yusuke Tsunemi, Yoshiaki Nakazawa, Hirohiko Takuda |
Influence of strain ratio on surface roughening in biaxial stretching of IF steel sheets |
Influence of strain ratio on surface roughening in biaxial stretching of IF steel sheets |
Influence of strain ratio on surface roughening in biaxial stretching of IF steel sheets |
ISIJ International, 58, 4, 704-713 |
ISIJ International, 58, 4, 704-713 |
ISIJ International, 58, 4, 704-713 |
2018 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama |
濵 孝之 |
Takayuki Hama |
Development and application of metal crystal plasticity models |
Development and application of metal crystal plasticity models |
Development and application of metal crystal plasticity models |
Impact, 2018, 9, 56-58 |
Impact, 2018, 9, 56-58 |
Impact, 2018, 9, 56-58 |
2018 |
|
English |
Research paper(scientific journal) |
Disclose to all |
濵 孝之 |
濵 孝之 |
|
塑性加工のための高精度有限要素解析プログラムの開発とその応用  |
塑性加工のための高精度有限要素解析プログラムの開発とその応用  |
|
塑性と加工, 58, 683, 1079-1083 |
塑性と加工, 58, 683, 1079-1083 |
, 58, 683, 1079-1083 |
2017/12 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
濵 孝之 |
濵 孝之 |
|
結晶塑性解析による数値材料試験  |
結晶塑性解析による数値材料試験  |
|
TEST, 44, 3-5 |
TEST, 44, 3-5 |
, 44, 3-5 |
2017/07 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
Hitoshi Fujimoto, Wataru Obana, Masayoshi Ashida, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Wataru Obana, Masayoshi Ashida, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Wataru Obana, Masayoshi Ashida, Takayuki Hama, Hirohiko Takuda |
Hydrodynamics and heat transfer characteristics of oil-in-water emulsion droplets impinging on hot stainless steel foil  |
Hydrodynamics and heat transfer characteristics of oil-in-water emulsion droplets impinging on hot stainless steel foil  |
Hydrodynamics and heat transfer characteristics of oil-in-water emulsion droplets impinging on hot stainless steel foil  |
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 85, 201-212 |
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 85, 201-212 |
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 85, 201-212 |
2017/07 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
西村隆一, 中澤嘉明, 浜孝之, 宅田裕彦 |
西村隆一, 中澤嘉明, 浜孝之, 宅田裕彦 |
|
曲げ挙動制御によるフランジアップ成形性の向上 |
曲げ挙動制御によるフランジアップ成形性の向上 |
|
塑性と加工, 58, 675, 304-310 |
塑性と加工, 58, 675, 304-310 |
, 58, 675, 304-310 |
2017/04 |
Refereed |
Japanese |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Akihiro Kobuki, Hirohiko Takuda |
Takayuki Hama, Akihiro Kobuki, Hirohiko Takuda |
Takayuki Hama, Akihiro Kobuki, Hirohiko Takuda |
Crystal-plasticity finite-element analysis of anisotropic deformation behavior in a commercially pure titanium Grade 1 sheet  |
Crystal-plasticity finite-element analysis of anisotropic deformation behavior in a commercially pure titanium Grade 1 sheet  |
Crystal-plasticity finite-element analysis of anisotropic deformation behavior in a commercially pure titanium Grade 1 sheet  |
INTERNATIONAL JOURNAL OF PLASTICITY, 91, 77-108 |
INTERNATIONAL JOURNAL OF PLASTICITY, 91, 77-108 |
INTERNATIONAL JOURNAL OF PLASTICITY, 91, 77-108 |
2017/04 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hitoshi Fujimoto, Soushi Yoshimoto, Ken Takahashi, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Soushi Yoshimoto, Ken Takahashi, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Soushi Yoshimoto, Ken Takahashi, Takayuki Hama, Hirohiko Takuda |
Deformation behavior of two droplets successively impinging obliquely on hot solid surface  |
Deformation behavior of two droplets successively impinging obliquely on hot solid surface  |
Deformation behavior of two droplets successively impinging obliquely on hot solid surface  |
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 81, 136-146 |
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 81, 136-146 |
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 81, 136-146 |
2017/02 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
HAMA Takayuki, HIRANO Kaho, FUJISAKI Yusuke, UCHIDA Sohei, FUJIMOTO Hitoshi, TAKUDA Hirohiko |
浜 孝之, 平野 夏帆, 藤﨑 悠介, 内田 壮平, 藤本 仁, 宅田 裕彦 |
HAMA Takayuki, HIRANO Kaho, FUJISAKI Yusuke, UCHIDA Sohei, FUJIMOTO Hitoshi, TAKUDA Hirohiko |
Effect of twinning on two-step deformation behavior of a commercially pure titanium sheet |
二段階負荷を受ける純チタン板の変形挙動に及ぼす双晶活動の影響 |
Effect of twinning on two-step deformation behavior of a commercially pure titanium sheet |
The Proceedings of the Materials and Mechanics Conference, 2017, 0, OS0717 |
M&M材料力学カンファレンス, 2017, 0, OS0717 |
The Proceedings of the Materials and Mechanics Conference, 2017, 0, OS0717 |
2017 |
Refereed |
Japanese |
|
Disclose to all |
Masahiro Kubo, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda |
Masahiro Kubo, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda |
Masahiro Kubo, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda |
Effect of Microstructure on Surface Roughening in Stretch Forming of Steel Sheets |
Effect of Microstructure on Surface Roughening in Stretch Forming of Steel Sheets |
Effect of Microstructure on Surface Roughening in Stretch Forming of Steel Sheets |
ISIJ INTERNATIONAL, 57, 12, 2185-2193 |
ISIJ INTERNATIONAL, 57, 12, 2185-2193 |
ISIJ INTERNATIONAL, 57, 12, 2185-2193 |
2017 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Keisuke Kojima, Masahiro Kubo, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Keisuke Kojima, Masahiro Kubo, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Keisuke Kojima, Masahiro Kubo, Hitoshi Fujimoto, Hirohiko Takuda |
Crystal Plasticity Finite-element Simulation on Development of Dislocation Structures in BCC Ferritic Single Crystals  |
Crystal Plasticity Finite-element Simulation on Development of Dislocation Structures in BCC Ferritic Single Crystals  |
Crystal Plasticity Finite-element Simulation on Development of Dislocation Structures in BCC Ferritic Single Crystals  |
ISIJ INTERNATIONAL, 57, 5, 866-874 |
ISIJ INTERNATIONAL, 57, 5, 866-874 |
ISIJ INTERNATIONAL, 57, 5, 866-874 |
2017 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
窪田紘明, 富澤淳, 岡田信宏, 山本憲司, 浜孝之, 宅田裕彦 |
窪田紘明, 富澤淳, 岡田信宏, 山本憲司, 浜孝之, 宅田裕彦 |
|
3次元熱間曲げ焼入れの成形可能範囲―3次元熱間曲げ焼入れ技術の開発 第2報― |
3次元熱間曲げ焼入れの成形可能範囲―3次元熱間曲げ焼入れ技術の開発 第2報― |
|
塑性と加工, 57, 668, 879-885 |
塑性と加工, 57, 668, 879-885 |
, 57, 668, 879-885 |
2016/09 |
Refereed |
Japanese |
Research paper(scientific journal) |
Disclose to all |
黒田充紀, 吉田健吾, 浜孝之之 |
黒田充紀, 吉田健吾, 浜孝之之 |
|
プロセッシング計算力学 |
プロセッシング計算力学 |
|
塑性と加工, 57, 667, 762-766 |
塑性と加工, 57, 667, 762-766 |
, 57, 667, 762-766 |
2016/08 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Yuhki Tanaka, Masato Uratani, Hirohiko Takuda |
Takayuki Hama, Yuhki Tanaka, Masato Uratani, Hirohiko Takuda |
Takayuki Hama, Yuhki Tanaka, Masato Uratani, Hirohiko Takuda |
Deformation behavior upon two-step loading in a magnesium alloy sheet  |
Deformation behavior upon two-step loading in a magnesium alloy sheet  |
Deformation behavior upon two-step loading in a magnesium alloy sheet  |
INTERNATIONAL JOURNAL OF PLASTICITY, 82, 283-304 |
INTERNATIONAL JOURNAL OF PLASTICITY, 82, 283-304 |
INTERNATIONAL JOURNAL OF PLASTICITY, 82, 283-304 |
2016/07 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
浜 孝之 |
浜 孝之 |
|
マグネシウム合金板の変形挙動予測のための結晶塑性モデリング  |
マグネシウム合金板の変形挙動予測のための結晶塑性モデリング  |
|
塑性と加工, 57, 662, 215-219 |
塑性と加工, 57, 662, 215-219 |
, 57, 662, 215-219 |
2016/04 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
Ning Yi, Takayuki Hama, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda |
Ning Yi, Takayuki Hama, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda |
Ning Yi, Takayuki Hama, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda |
Anisotropic deformation behavior under various strain paths in commercially pure titanium Grade 1 and Grade 2 sheets  |
Anisotropic deformation behavior under various strain paths in commercially pure titanium Grade 1 and Grade 2 sheets  |
Anisotropic deformation behavior under various strain paths in commercially pure titanium Grade 1 and Grade 2 sheets  |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 655, 70-85 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 655, 70-85 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 655, 70-85 |
2016/02 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
HAMA Takayuki, HATAKEYAMA Shinichi, SUZUKI Tomotaka, UCHIDA Sohei, FUJIMOTO Hitoshi, TAKUDA Hirohiko |
浜 孝之, 畠山 真一, 鈴木 智貴, 内田 壮平, 藤本 仁, 宅田 裕彦 |
HAMA Takayuki, HATAKEYAMA Shinichi, SUZUKI Tomotaka, UCHIDA Sohei, FUJIMOTO Hitoshi, TAKUDA Hirohiko |
Stress Behavior during Tension in a Pre-compressed Magnesium Alloy Sheet |
予圧縮を受けたマグネシウム合金板における引張変形時の応力挙動 |
Stress Behavior during Tension in a Pre-compressed Magnesium Alloy Sheet |
The Proceedings of the Materials and processing conference, 2016, 0, 712-712 |
機械材料・材料加工技術講演会講演論文集, 2016, 0, 712-712 |
The Proceedings of the Materials and processing conference, 2016, 0, 712-712 |
2016 |
Refereed |
Japanese |
|
Disclose to all |
HAMA Takayuki, KOBUKI Akihiro, UCHIDA Sohei, FUJIMOTO Hitoshi, TAKUDA Hirohiko |
浜 孝之, 小吹 晃弘, 内田 壮平, 藤本 仁, 宅田 裕彦 |
HAMA Takayuki, KOBUKI Akihiro, UCHIDA Sohei, FUJIMOTO Hitoshi, TAKUDA Hirohiko |
Crystal-plasticity analysis of deformation behavior in commercially pure titanium sheet upon various loading paths |
種々の負荷経路における純チタン板の変形挙動に関する結晶塑性解析 |
Crystal-plasticity analysis of deformation behavior in commercially pure titanium sheet upon various loading paths |
The Proceedings of the Materials and Mechanics Conference, 2016, 0, OS01-7 |
M&M材料力学カンファレンス, 2016, 0, OS01-7 |
The Proceedings of the Materials and Mechanics Conference, 2016, 0, OS01-7 |
2016 |
Refereed |
Japanese |
|
Disclose to all |
Hama, Takayuki, Yi, Ning, Kobuki, Akihiro, Uchida, Sohei, Fujimoto, Hitoshi, Takuda, Hirohiko |
Hama, Takayuki, Yi, Ning, Kobuki, Akihiro, Uchida, Sohei, Fujimoto, Hitoshi, Takuda, Hirohiko |
Hama, Takayuki, Yi, Ning, Kobuki, Akihiro, Uchida, Sohei, Fujimoto, Hitoshi, Takuda, Hirohiko |
Work-Hardening Behavior of Commercially Pure Titanium JIS Grade 1 Sheet upon Reverse Loading  |
Work-Hardening Behavior of Commercially Pure Titanium JIS Grade 1 Sheet upon Reverse Loading  |
Work-Hardening Behavior of Commercially Pure Titanium JIS Grade 1 Sheet upon Reverse Loading  |
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 1769 |
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 1769 |
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 1769 |
2016 |
Refereed |
English |
Research paper(international conference proceedings) |
Disclose to all |
Hitoshi Fujimoto, Naoya Hayashi, Junya Nakahara, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Naoya Hayashi, Junya Nakahara, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Naoya Hayashi, Junya Nakahara, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda |
Boiling Heat Transfer during Impingement of Two or Three Pipe Laminar Jets onto Moving Steel Sheet  |
Boiling Heat Transfer during Impingement of Two or Three Pipe Laminar Jets onto Moving Steel Sheet  |
Boiling Heat Transfer during Impingement of Two or Three Pipe Laminar Jets onto Moving Steel Sheet  |
ISIJ INTERNATIONAL, 56, 11, 2016-2021 |
ISIJ INTERNATIONAL, 56, 11, 2016-2021 |
ISIJ INTERNATIONAL, 56, 11, 2016-2021 |
2016 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
H. Sunaga, M. Takamura, Y. Ikeda, Y. Otake, T. Hama, M. Kumagai, H. Suzuki, S. Suzuki |
H. Sunaga, M. Takamura, Y. Ikeda, Y. Otake, T. Hama, M. Kumagai, H. Suzuki, S. Suzuki |
H. Sunaga, M. Takamura, Y. Ikeda, Y. Otake, T. Hama, M. Kumagai, H. Suzuki, S. Suzuki |
Texture evaluation in ductile fracture process by neutron diffraction measurement  |
Texture evaluation in ductile fracture process by neutron diffraction measurement  |
Texture evaluation in ductile fracture process by neutron diffraction measurement  |
NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B, 734, 032027 |
NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B, 734, 032027 |
NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B, 734, 032027 |
2016 |
Refereed |
English |
Research paper(international conference proceedings) |
Disclose to all |
M. Takamura, Y. Ikeda, H. Sunaga, A. Taketani, Y. Otake, H. Suzuki, M. Kumagai, T. Hama, Y. Oba |
|
M. Takamura, Y. Ikeda, H. Sunaga, A. Taketani, Y. Otake, H. Suzuki, M. Kumagai, T. Hama, Y. Oba |
Non-destructive Texture Measurement of Steel Sheets with Compact Neutron Source "RANS"  |
Non-destructive texture measurement of steel sheets with compact neutron souce “RANS”  |
Non-destructive Texture Measurement of Steel Sheets with Compact Neutron Source "RANS"  |
NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B, 734, 032047 |
Journal of Physics: Conference Series (NUMISHEET 2016), 734, 032047 |
NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B, 734, 032047 |
2016 |
Refereed |
English |
Research paper(international conference proceedings) |
Disclose to all |
T. Hama, A. Kobuki, H. Fujimoto, H. Takuda |
T. Hama, A. Kobuki, H. Fujimoto, H. Takuda |
T. Hama, A. Kobuki, H. Fujimoto, H. Takuda |
Crystal-plasticity finite-element analysis of deformation behavior in a commercially pure titanium sheet  |
Crystal-plasticity finite-element analysis of deformation behavior in a commercially pure titanium sheet  |
Crystal-plasticity finite-element analysis of deformation behavior in a commercially pure titanium sheet  |
NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B, 734, 032071 |
NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B, 734, 032071 |
NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B, 734, 032071 |
2016 |
Refereed |
English |
Research paper(international conference proceedings) |
Disclose to all |
Masahiro Kubo, Yoshiaki Nakazawa, Hiroshi Yoshida, Shigeru Yonemura, Takayuki Hama, Hirohiko Takuda |
Masahiro Kubo, Yoshiaki Nakazawa, Hiroshi Yoshida, Shigeru Yonemura, Takayuki Hama, Hirohiko Takuda |
Masahiro Kubo, Yoshiaki Nakazawa, Hiroshi Yoshida, Shigeru Yonemura, Takayuki Hama, Hirohiko Takuda |
Effect of Microstructure Variation on Differential Hardening Behavior of Steel Sheets under Biaxial Tensile State |
Effect of Microstructure Variation on Differential Hardening Behavior of Steel Sheets under Biaxial Tensile State |
Effect of Microstructure Variation on Differential Hardening Behavior of Steel Sheets under Biaxial Tensile State |
ISIJ INTERNATIONAL, 56, 12, 2259-2266 |
ISIJ INTERNATIONAL, 56, 12, 2259-2266 |
ISIJ INTERNATIONAL, 56, 12, 2259-2266 |
2016 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Masahiro Kubo, Hiroshi Yoshida, Akihiro Uenishi, Seiichi Suzuki, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda |
Masahiro Kubo, Hiroshi Yoshida, Akihiro Uenishi, Seiichi Suzuki, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda |
Masahiro Kubo, Hiroshi Yoshida, Akihiro Uenishi, Seiichi Suzuki, Yoshiaki Nakazawa, Takayuki Hama, Hirohiko Takuda |
Development of Biaxial Tensile Test System for In-situ Scanning Electron Microscope and Electron Backscatter Diffraction Analysis |
Development of Biaxial Tensile Test System for In-situ Scanning Electron Microscope and Electron Backscatter Diffraction Analysis |
Development of Biaxial Tensile Test System for In-situ Scanning Electron Microscope and Electron Backscatter Diffraction Analysis |
ISIJ INTERNATIONAL, 56, 4, 669-677 |
ISIJ INTERNATIONAL, 56, 4, 669-677 |
ISIJ INTERNATIONAL, 56, 4, 669-677 |
2016 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
黒田充紀, 浜孝之, 上森武 |
黒田充紀, 浜孝之, 上森武 |
|
プロセッシング計算力学 |
プロセッシング計算力学 |
|
塑性と加工, 56, 655, 665-669 |
塑性と加工, 56, 655, 665-669 |
, 56, 655, 665-669 |
2015/08 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
濵 孝之 |
濵 孝之 |
|
双晶回復を考慮した結晶塑性有限要素法によるマグネシウム合金の変形挙動予測  |
双晶回復を考慮した結晶塑性有限要素法によるマグネシウム合金の変形挙動予測  |
|
軽金属, 65, 5, 174-183 |
軽金属, 65, 5, 174-183 |
, 65, 5, 174-183 |
2015/05 |
Refereed |
Japanese |
Research paper(scientific journal) |
Disclose to all |
HAMA Takayuki, SUZUKI Tomotaka, UCHIDA Sohei, TANAKA Tsutomu, FUJIMOTO Hitoshi, TAKUDA Hirohiko |
浜 孝之, 鈴木 智貴, 内田 壮平, 田中 努, 藤本 仁, 宅田 裕彦 |
HAMA Takayuki, SUZUKI Tomotaka, UCHIDA Sohei, TANAKA Tsutomu, FUJIMOTO Hitoshi, TAKUDA Hirohiko |
OS0117-284 Effect of twinning on thickness strain in a rolled magnesium alloy sheet |
OS0117-284 マグネシウム合金圧延板における双晶活動の板厚ひずみに及ぼす影響 |
OS0117-284 Effect of twinning on thickness strain in a rolled magnesium alloy sheet |
The Proceedings of the Materials and Mechanics Conference, 2015, 0, _OS0117-28-_OS0117-28 |
M&M材料力学カンファレンス, 2015, 0, _OS0117-28-_OS0117-28 |
The Proceedings of the Materials and Mechanics Conference, 2015, 0, _OS0117-28-_OS0117-28 |
2015 |
Refereed |
Japanese |
|
Disclose to all |
Hitoshi Fujimoto, Yamato Shiramasa, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Yamato Shiramasa, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Yamato Shiramasa, Kenta Morisawa, Takayuki Hama, Hirohiko Takuda |
Heat Transfer Characteristics of a Pipe-laminar Jet Impinging on a Moving Hot Solid  |
Heat Transfer Characteristics of a Pipe-laminar Jet Impinging on a Moving Hot Solid  |
Heat Transfer Characteristics of a Pipe-laminar Jet Impinging on a Moving Hot Solid  |
ISIJ INTERNATIONAL, 55, 9, 1994-2001 |
ISIJ INTERNATIONAL, 55, 9, 1994-2001 |
ISIJ INTERNATIONAL, 55, 9, 1994-2001 |
2015 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Yuhki Tanaka, Masato Uratani, Tsutomu Tanaka, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Yuhki Tanaka, Masato Uratani, Tsutomu Tanaka, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Yuhki Tanaka, Masato Uratani, Tsutomu Tanaka, Hitoshi Fujimoto, Hirohiko Takuda |
Effect of pre-compressive strain on work-hardening behavior upon two-step loading in a magnesium alloy sheet  |
Effect of pre-compressive strain on work-hardening behavior upon two-step loading in a magnesium alloy sheet  |
Effect of pre-compressive strain on work-hardening behavior upon two-step loading in a magnesium alloy sheet  |
Key Engineering Materials, 639, 347-352 |
Key Engineering Materials, 639, 347-352 |
Key Engineering Materials, 639, 347-352 |
2015 |
Refereed |
English |
Research paper(international conference proceedings) |
Disclose to all |
Takayuki Hama, Tsuyoshi Mayama, Hirohiko Takuda |
|
Takayuki Hama, Tsuyoshi Mayama, Hirohiko Takuda |
Deformation behavior of a magnesium alloy sheet with random crystallographic orientations under various loading paths |
Deformation behavior of a magnesium alloy sheet with random crystallographic orientations under various loading paths |
Deformation behavior of a magnesium alloy sheet with random crystallographic orientations under various loading paths |
The Romanian Journal of Technical Sciences-Applied Mechanics, 60, 1-16 |
The Romanian Journal of Technical Sciences-Applied Mechanics, 60, 1-16 |
The Romanian Journal of Technical Sciences-Applied Mechanics, 60, 1-16 |
2015 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Ryogo Matsudai, Yota Kuchinomachi, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Ryogo Matsudai, Yota Kuchinomachi, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Ryogo Matsudai, Yota Kuchinomachi, Hitoshi Fujimoto, Hirohiko Takuda |
Non-linear Deformation Behavior during Unloading in Various Metal Sheets  |
Non-linear Deformation Behavior during Unloading in Various Metal Sheets  |
Non-linear Deformation Behavior during Unloading in Various Metal Sheets  |
ISIJ INTERNATIONAL, 55, 5, 1067-1075 |
ISIJ INTERNATIONAL, 55, 5, 1067-1075 |
ISIJ INTERNATIONAL, 55, 5, 1067-1075 |
2015 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Hirotaka Nagao, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Hirotaka Nagao, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Hirotaka Nagao, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda |
Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths  |
Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths  |
Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths  |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 620, 390-398 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 620, 390-398 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 620, 390-398 |
2015/01 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hitoshi Fujimoto, Shohei Watanabe, Takahiko Okamoto, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Shohei Watanabe, Takahiko Okamoto, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Shohei Watanabe, Takahiko Okamoto, Takayuki Hama, Hirohiko Takuda |
Photographic study of hydrodynamics of drops of aqueous polymer solution impinging on hot solid  |
Photographic study of hydrodynamics of drops of aqueous polymer solution impinging on hot solid  |
Photographic study of hydrodynamics of drops of aqueous polymer solution impinging on hot solid  |
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 60, 66-74 |
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 60, 66-74 |
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 60, 66-74 |
2015/01 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Hirotaka Nagao, Yota Kuchinomachi, Hirohiko Takuda |
Takayuki Hama, Hirotaka Nagao, Yota Kuchinomachi, Hirohiko Takuda |
Takayuki Hama, Hirotaka Nagao, Yota Kuchinomachi, Hirohiko Takuda |
Effect of pre-strain on work-hardening behavior of magnesium alloy sheets upon cyclic loading |
Effect of pre-strain on work-hardening behavior of magnesium alloy sheets upon cyclic loading |
Effect of pre-strain on work-hardening behavior of magnesium alloy sheets upon cyclic loading |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 591, 69-77 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 591, 69-77 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 591, 69-77 |
2014/01 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Keisuke Kojima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Keisuke Kojima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Keisuke Kojima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda |
Variation of lubrication condition during sheet hydroforming  |
Variation of lubrication condition during sheet hydroforming  |
Variation of lubrication condition during sheet hydroforming  |
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 81, 1029-1034 |
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 81, 1029-1034 |
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 81, 1029-1034 |
2014 |
Refereed |
English |
Research paper(international conference proceedings) |
Disclose to all |
Takayuki Hama, Hirohiko Takuda |
Takayuki Hama, Hirohiko Takuda |
Takayuki Hama, Hirohiko Takuda |
Work-hardening behavior upon reverse loading in a rolled AZ31 magnesium alloy sheet |
Work-hardening behavior upon reverse loading in a rolled AZ31 magnesium alloy sheet |
Work-hardening behavior upon reverse loading in a rolled AZ31 magnesium alloy sheet |
Key Engineering Materials, 622-623, 603-608 |
Key Engineering Materials, 622-623, 603-608 |
Key Engineering Materials, 622-623, 603-608 |
2014 |
Refereed |
English |
Research paper(international conference proceedings) |
Disclose to all |
Takayuki Hama, Tsuyoshi Mayama, Hirohiko Takuda |
Takayuki Hama, Tsuyoshi Mayama, Hirohiko Takuda |
Takayuki Hama, Tsuyoshi Mayama, Hirohiko Takuda |
Deformation Behavior of a Magnesium Alloy Sheet with random crystallographic orientations |
Deformation Behavior of a Magnesium Alloy Sheet with random crystallographic orientations |
Deformation Behavior of a Magnesium Alloy Sheet with random crystallographic orientations |
MATERIAL FORMING ESAFORM 2014, 611-612, 27-32 |
MATERIAL FORMING ESAFORM 2014, 611-612, 27-32 |
MATERIAL FORMING ESAFORM 2014, 611-612, 27-32 |
2014 |
Refereed |
English |
Research paper(international conference proceedings) |
Disclose to all |
Hama, T, Hosokawa, N, Takuda, H |
Hama, T, Hosokawa, N, Takuda, H |
Hama, T, Hosokawa, N, Takuda, H |
Accurate parameter identification for crystal plasticity finite-element analysis in a magnesium alloy sheet |
Accurate parameter identification for crystal plasticity finite-element analysis in a magnesium alloy sheet |
Accurate parameter identification for crystal plasticity finite-element analysis in a magnesium alloy sheet |
Proc. the 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 2014), 692-695 |
Proc. the 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 2014), 692-695 |
Proc. the 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 2014), 692-695 |
2014 |
Refereed |
English |
|
Disclose to all |
Hiroaki Kubota, Atsushi Tomizawa, Kenji Yamamoto, Nobuhiro Okada, Takayuki Hama, Hirohiko Takuda |
Hiroaki Kubota, Atsushi Tomizawa, Kenji Yamamoto, Nobuhiro Okada, Takayuki Hama, Hirohiko Takuda |
Hiroaki Kubota, Atsushi Tomizawa, Kenji Yamamoto, Nobuhiro Okada, Takayuki Hama, Hirohiko Takuda |
Finite Element Analysis of Three-Dimensional Hot Bending and Direct Quench Process Considering Phase Transformation and Temperature Distribution by Induction Heating |
Finite Element Analysis of Three-Dimensional Hot Bending and Direct Quench Process Considering Phase Transformation and Temperature Distribution by Induction Heating |
Finite Element Analysis of Three-Dimensional Hot Bending and Direct Quench Process Considering Phase Transformation and Temperature Distribution by Induction Heating |
ISIJ INTERNATIONAL, 54, 8, 1856-1865 |
ISIJ INTERNATIONAL, 54, 8, 1856-1865 |
ISIJ INTERNATIONAL, 54, 8, 1856-1865 |
2014 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hitoshi Fujimoto, Katsutoshi Tatebe, Yamato Shiramasa, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Katsutoshi Tatebe, Yamato Shiramasa, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Katsutoshi Tatebe, Yamato Shiramasa, Takayuki Hama, Hirohiko Takuda |
Heat Transfer Characteristics of a Circular Water Jet Impinging on a Moving Hot Solid |
Heat Transfer Characteristics of a Circular Water Jet Impinging on a Moving Hot Solid |
Heat Transfer Characteristics of a Circular Water Jet Impinging on a Moving Hot Solid |
ISIJ INTERNATIONAL, 54, 6, 1338-1345 |
ISIJ INTERNATIONAL, 54, 6, 1338-1345 |
ISIJ INTERNATIONAL, 54, 6, 1338-1345 |
2014 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
黒田充紀, 浜孝之, 眞山剛 |
黒田充紀, 浜孝之, 眞山剛 |
|
プロセッシング計算力学 |
プロセッシング計算力学 |
|
塑性と加工, 55, 643, 66-70 |
塑性と加工, 55, 643, 66-70 |
, 55, 643, 66-70 |
2014 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
濵 孝之 |
濵 孝之 |
|
塑性加工解析に必要なFEM ④プレス加工の解法 (解説)  |
塑性加工解析に必要なFEM ④プレス加工の解法 (解説)  |
|
塑性と加工, 55, 641, 491-496 |
塑性と加工, 55, 641, 491-496 |
, 55, 641, 491-496 |
2014 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
Koichi Ito, Takayuki Hama |
伊藤耿一, 浜孝之 |
Koichi Ito, Takayuki Hama |
Progresses in Analytical Method of Metal Forming and Material Modeling  |
成形加工のための解析手法と材料モデリング  |
Progresses in Analytical Method of Metal Forming and Material Modeling  |
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 100, 12, 1467-1480 |
鉄と鋼, 100, 12, 1467-1480 |
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 100, 12, 1467-1480 |
2014 |
Refereed |
Japanese |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Naoya Kitamura, Hirohiko Takuda |
Takayuki Hama, Naoya Kitamura, Hirohiko Takuda |
Takayuki Hama, Naoya Kitamura, Hirohiko Takuda |
Effect of twinning and detwinning on inelastic behavior during unloading in a magnesium alloy sheet  |
Effect of twinning and detwinning on inelastic behavior during unloading in a magnesium alloy sheet  |
Effect of twinning and detwinning on inelastic behavior during unloading in a magnesium alloy sheet  |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 583, 232-241 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 583, 232-241 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 583, 232-241 |
2013/10 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hitoshi Fujimoto, Yasuyuki Lee, Ryosuke Kato, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Yasuyuki Lee, Ryosuke Kato, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Yasuyuki Lee, Ryosuke Kato, Takayuki Hama, Hirohiko Takuda |
Experimental and Numerical Study of Twin Circular Water Jets Impinging on a Moving Thin Film |
Experimental and Numerical Study of Twin Circular Water Jets Impinging on a Moving Thin Film |
Experimental and Numerical Study of Twin Circular Water Jets Impinging on a Moving Thin Film |
ISIJ INTERNATIONAL, 53, 8, 1427-1435 |
ISIJ INTERNATIONAL, 53, 8, 1427-1435 |
ISIJ INTERNATIONAL, 53, 8, 1427-1435 |
2013 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
井口敬之助, 栗山幸久, 師井直紀, 浜孝之, 宅田裕彦 |
井口敬之助, 栗山幸久, 師井直紀, 浜孝之, 宅田裕彦 |
|
高強度鋼板の曲げ成形におけるロール形式の影響 –電縫鋼管のロール成形シミュレーション 第2報– |
高強度鋼板の曲げ成形におけるロール形式の影響 –電縫鋼管のロール成形シミュレーション 第2報– |
|
塑性と加工,54-628(2013),436-440, 54, 628, 436-440 |
塑性と加工,54-628(2013),436-440, 54, 628, 436-440 |
, 54, 628, 436-440 |
2013 |
Refereed |
Japanese |
Research paper(scientific journal) |
Disclose to all |
Satoshi Shirakami, Takayuki Hama, Tohru Yoshida, Hirohiko Takuda, Masaaki Mizumura, Masayoshi Suehiro |
Satoshi Shirakami, Takayuki Hama, Tohru Yoshida, Hirohiko Takuda, Masaaki Mizumura, Masayoshi Suehiro |
Satoshi Shirakami, Takayuki Hama, Tohru Yoshida, Hirohiko Takuda, Masaaki Mizumura, Masayoshi Suehiro |
Development of Measurement Method of Draw Bead Parameters for CAE Analysis |
Development of Measurement Method of Draw Bead Parameters for CAE Analysis |
Development of Measurement Method of Draw Bead Parameters for CAE Analysis |
NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS, 1567, 804-807 |
NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS, 1567, 804-807 |
NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS, 1567, 804-807 |
2013 |
Refereed |
English |
Research paper(international conference proceedings) |
Disclose to all |
濵 孝之 |
濵 孝之 |
|
板成形シミュレーションに及ぼす各種解析条件の影響 |
板成形シミュレーションに及ぼす各種解析条件の影響 |
|
素形材, 54, 4, 45-50 |
素形材, 54, 4, 45-50 |
, 54, 4, 45-50 |
2013 |
|
Japanese |
Research paper(research society, symposium, etc.) |
Disclose to all |
Fujimoto, H, Ogihara, T, Yoshimoto, S, Hama, T, Takuda, H |
|
Fujimoto, H, Ogihara, T, Yoshimoto, S, Hama, T, Takuda, H |
Successive collision of two droplets with hot solid |
Successive collision of two droplets with hot solid |
Successive collision of two droplets with hot solid |
International Journal of Transport Phenomena, 13, 171-182 |
International Journal of Transport Phenomena, 13, 171-182 |
International Journal of Transport Phenomena, 13, 171-182 |
2013 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
井口 敬之助, 栗山 幸久, 師井 直紀, 浜 孝之, 宅田 裕彦 |
井口 敬之助, 栗山 幸久, 師井 直紀, 浜 孝之, 宅田 裕彦 |
|
高張力鋼板のロール成形におけるスプリングバックの検討 : 電縫鋼管のロール成形シミュレーション第1報 |
高張力鋼板のロール成形におけるスプリングバックの検討 : 電縫鋼管のロール成形シミュレーション第1報 |
|
塑性と加工, 53, 622, 1003-1007 |
塑性と加工, 53, 622, 1003-1007 |
, 53, 622, 1003-1007 |
2012/11/25 |
Refereed |
Japanese |
|
Disclose to all |
Takayuki Hama, Yuhta Kariyazaki, Naohiro Hosokawa, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Yuhta Kariyazaki, Naohiro Hosokawa, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Yuhta Kariyazaki, Naohiro Hosokawa, Hitoshi Fujimoto, Hirohiko Takuda |
Work-hardening behaviors of magnesium alloy sheet during in-plane cyclic loading  |
Work-hardening behaviors of magnesium alloy sheet during in-plane cyclic loading  |
Work-hardening behaviors of magnesium alloy sheet during in-plane cyclic loading  |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 551, 209-217 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 551, 209-217 |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 551, 209-217 |
2012/08 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Toru Kitajima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Toru Kitajima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Toru Kitajima, Yoshihiko Nishimura, Hitoshi Fujimoto, Hirohiko Takuda |
Effect of Outflow Volume of Pressure Medium on Fluid-Lubrication Effect during Sheet Hydroforming |
Effect of Outflow Volume of Pressure Medium on Fluid-Lubrication Effect during Sheet Hydroforming |
Effect of Outflow Volume of Pressure Medium on Fluid-Lubrication Effect during Sheet Hydroforming |
MATERIALS TRANSACTIONS, 53, 5, 826-832 |
MATERIALS TRANSACTIONS, 53, 5, 826-832 |
MATERIALS TRANSACTIONS, 53, 5, 826-832 |
2012/05 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Hirohiko Takuda |
Takayuki Hama, Hirohiko Takuda |
Takayuki Hama, Hirohiko Takuda |
Crystal plasticity finite-element simulation of work-hardening behavior in a magnesium alloy sheet under biaxial tension  |
Crystal plasticity finite-element simulation of work-hardening behavior in a magnesium alloy sheet under biaxial tension  |
Crystal plasticity finite-element simulation of work-hardening behavior in a magnesium alloy sheet under biaxial tension  |
COMPUTATIONAL MATERIALS SCIENCE, 51, 1, 156-164 |
COMPUTATIONAL MATERIALS SCIENCE, 51, 1, 156-164 |
COMPUTATIONAL MATERIALS SCIENCE, 51, 1, 156-164 |
2012/01 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Yanagida, A, Hama, T |
Yanagida, A, Hama, T |
Yanagida, A, Hama, T |
Simulation of texture evolution during ECAE using crystal plasticity finite element method with representative element |
Simulation of texture evolution during ECAE using crystal plasticity finite element method with representative element |
Simulation of texture evolution during ECAE using crystal plasticity finite element method with representative element |
Steel Research International, Special Edition, (2012), 1127-1130. |
Steel Research International, Special Edition, (2012), 1127-1130. |
Steel Research International, Special Edition, (2012), 1127-1130. |
2012 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takamura, M, Asakura, M, Fukui, A, Yano, H, Hama, T, Sunaga, H, Makinouchi, A, Asakawa, M |
Takamura, M, Asakura, M, Fukui, A, Yano, H, Hama, T, Sunaga, H, Makinouchi, A, Asakawa, M |
Takamura, M, Asakura, M, Fukui, A, Yano, H, Hama, T, Sunaga, H, Makinouchi, A, Asakawa, M |
Reduction in twist occurring in curved hat channel products made of high-strength steel sheets with stepped shape on side wall |
Reduction in twist occurring in curved hat channel products made of high-strength steel sheets with stepped shape on side wall |
Reduction in twist occurring in curved hat channel products made of high-strength steel sheets with stepped shape on side wall |
Steel Research International, Special Edition, 383-386. |
Steel Research International, Special Edition, 383-386. |
Steel Research International, Special Edition, 383-386. |
2012 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Iguchi, K, Kuriyama, Y, Moroi, N, Hama, T, Takuda, H |
Iguchi, K, Kuriyama, Y, Moroi, N, Hama, T, Takuda, H |
Iguchi, K, Kuriyama, Y, Moroi, N, Hama, T, Takuda, H |
Deformation behavior of high strength steel sheet during roll forming of electric resistance welded pipe |
Deformation behavior of high strength steel sheet during roll forming of electric resistance welded pipe |
Deformation behavior of high strength steel sheet during roll forming of electric resistance welded pipe |
Steel Research International, Special Edition, 927-930. |
Steel Research International, Special Edition, 927-930. |
Steel Research International, Special Edition, 927-930. |
2012 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hama, T, Takuda, H |
Hama, T, Takuda, H |
Hama, T, Takuda, H |
Crystal plasticity finite-element simulation of deformation behavior in a magnesium alloy sheet considering detwinning |
Crystal plasticity finite-element simulation of deformation behavior in a magnesium alloy sheet considering detwinning |
Crystal plasticity finite-element simulation of deformation behavior in a magnesium alloy sheet considering detwinning |
Steel Research International, Special Edition, (2012), 1115-1118. |
Steel Research International, Special Edition, (2012), 1115-1118. |
Steel Research International, Special Edition, (2012), 1115-1118. |
2012 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Hirohiko Takuda |
Takayuki Hama, Hirohiko Takuda |
Takayuki Hama, Hirohiko Takuda |
Crystal-plasticity finite-element analysis of inelastic behavior during unloading in a magnesium alloy sheet |
Crystal-plasticity finite-element analysis of inelastic behavior during unloading in a magnesium alloy sheet |
Crystal-plasticity finite-element analysis of inelastic behavior during unloading in a magnesium alloy sheet |
INTERNATIONAL JOURNAL OF PLASTICITY, 27, 7, 1072-1092 |
INTERNATIONAL JOURNAL OF PLASTICITY, 27, 7, 1072-1092 |
INTERNATIONAL JOURNAL OF PLASTICITY, 27, 7, 1072-1092 |
2011/07 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hitoshi Fujimoto, Yuhei Suzuki, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Yuhei Suzuki, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Yuhei Suzuki, Takayuki Hama, Hirohiko Takuda |
Flow Characteristics of Circular Liquid Jet Impinging on a Moving Surface Covered with a Water Film |
Flow Characteristics of Circular Liquid Jet Impinging on a Moving Surface Covered with a Water Film |
Flow Characteristics of Circular Liquid Jet Impinging on a Moving Surface Covered with a Water Film |
ISIJ INTERNATIONAL, 51, 9, 1497-1505 |
ISIJ INTERNATIONAL, 51, 9, 1497-1505 |
ISIJ INTERNATIONAL, 51, 9, 1497-1505 |
2011 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hama, T, Ochi, K, Kitamura, N, Fujimoto, H, Takuda, H |
Hama, T, Ochi, K, Kitamura, N, Fujimoto, H, Takuda, H |
Hama, T, Ochi, K, Kitamura, N, Fujimoto, H, Takuda, H |
Unloading behaviour of a magnesium alloy sheet under various loading paths |
Unloading behaviour of a magnesium alloy sheet under various loading paths |
Unloading behaviour of a magnesium alloy sheet under various loading paths |
Steel Research International, (2011), Special Edition, 1054-1059. |
Steel Research International, (2011), Special Edition, 1054-1059. |
Steel Research International, (2011), Special Edition, 1054-1059. |
2011 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
浜孝之 |
浜孝之 |
|
プレス成形シミュレーションを支える解析要素技術の基礎 |
プレス成形シミュレーションを支える解析要素技術の基礎 |
|
塑性と加工, 51, 598, 1017-1022 |
塑性と加工, 51, 598, 1017-1022 |
, 51, 598, 1017-1022 |
2010/11 |
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
Masato Takamura, Ayako Fukui, Takayuki Hama, Yuji Miyoshi, Masashi Sakata, Hideyuki Sunaga, Akitake Makinouchi, Motoo Asakawa |
Masato Takamura, Ayako Fukui, Takayuki Hama, Yuji Miyoshi, Masashi Sakata, Hideyuki Sunaga, Akitake Makinouchi, Motoo Asakawa |
Masato Takamura, Ayako Fukui, Takayuki Hama, Yuji Miyoshi, Masashi Sakata, Hideyuki Sunaga, Akitake Makinouchi, Motoo Asakawa |
Twisting in Curved Hat Channel Products Made of High Strength Steel Sheet |
Twisting in Curved Hat Channel Products Made of High Strength Steel Sheet |
Twisting in Curved Hat Channel Products Made of High Strength Steel Sheet |
STEEL RESEARCH INTERNATIONAL, 81, 9, 821-824 |
STEEL RESEARCH INTERNATIONAL, 81, 9, 821-824 |
STEEL RESEARCH INTERNATIONAL, 81, 9, 821-824 |
2010/09 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Eiji Isogai, Tohru Yoshida, Hirohiko Takuda |
Takayuki Hama, Eiji Isogai, Tohru Yoshida, Hirohiko Takuda |
Takayuki Hama, Eiji Isogai, Tohru Yoshida, Hirohiko Takuda |
Experimental Verification of Springback Simulation Using Local Interpolation for Tool Surfaces |
Experimental Verification of Springback Simulation Using Local Interpolation for Tool Surfaces |
Experimental Verification of Springback Simulation Using Local Interpolation for Tool Surfaces |
STEEL RESEARCH INTERNATIONAL, 81, 9, 753-756 |
STEEL RESEARCH INTERNATIONAL, 81, 9, 753-756 |
STEEL RESEARCH INTERNATIONAL, 81, 9, 753-756 |
2010/09 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Keinosuke Iguchi, Kazuki Nishida, Takayuki Hama, Hideyuki Nakamura, Yukihisa Kuriyama, Hirohiko Takuda |
Keinosuke Iguchi, Kazuki Nishida, Takayuki Hama, Hideyuki Nakamura, Yukihisa Kuriyama, Hirohiko Takuda |
Keinosuke Iguchi, Kazuki Nishida, Takayuki Hama, Hideyuki Nakamura, Yukihisa Kuriyama, Hirohiko Takuda |
Finite Element Analysis of Strip Deformation in Roll Forming of Electric Resistance Welded Pipe with Vertical Rolls |
Finite Element Analysis of Strip Deformation in Roll Forming of Electric Resistance Welded Pipe with Vertical Rolls |
Finite Element Analysis of Strip Deformation in Roll Forming of Electric Resistance Welded Pipe with Vertical Rolls |
STEEL RESEARCH INTERNATIONAL, 81, 9, 186-189 |
STEEL RESEARCH INTERNATIONAL, 81, 9, 186-189 |
STEEL RESEARCH INTERNATIONAL, 81, 9, 186-189 |
2010/09 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
M. Takamura, M. Sakata, A. Fukui, T. Hama, Y. Miyoshi, H. Sunaga, A. Makinouchi, M. Asakawa |
M. Takamura, M. Sakata, A. Fukui, T. Hama, Y. Miyoshi, H. Sunaga, A. Makinouchi, M. Asakawa |
M. Takamura, M. Sakata, A. Fukui, T. Hama, Y. Miyoshi, H. Sunaga, A. Makinouchi, M. Asakawa |
INVESTIGATION OF TWIST IN CURVED HAT CHANNEL PRODUCTS BY ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS |
INVESTIGATION OF TWIST IN CURVED HAT CHANNEL PRODUCTS BY ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS |
INVESTIGATION OF TWIST IN CURVED HAT CHANNEL PRODUCTS BY ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS |
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 3, 131-134 |
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 3, 131-134 |
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 3, 131-134 |
2010/04 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Yuhta Kariyazaki, Keisuke Ochi, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Yuhta Kariyazaki, Keisuke Ochi, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Yuhta Kariyazaki, Keisuke Ochi, Hitoshi Fujimoto, Hirohiko Takuda |
Springback Characteristics of Magnesium Alloy Sheet AZ31B in Draw-Bending |
Springback Characteristics of Magnesium Alloy Sheet AZ31B in Draw-Bending |
Springback Characteristics of Magnesium Alloy Sheet AZ31B in Draw-Bending |
MATERIALS TRANSACTIONS, 51, 4, 685-693 |
MATERIALS TRANSACTIONS, 51, 4, 685-693 |
MATERIALS TRANSACTIONS, 51, 4, 685-693 |
2010/04 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hitoshi Fujimoto, Masahiro Kubo, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Masahiro Kubo, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Masahiro Kubo, Takayuki Hama, Hirohiko Takuda |
Transport Phenomena of Solid Particles in Pulsatile Pipe Flow  |
Transport Phenomena of Solid Particles in Pulsatile Pipe Flow  |
Transport Phenomena of Solid Particles in Pulsatile Pipe Flow  |
ADVANCES IN MECHANICAL ENGINEERING, 2010 |
ADVANCES IN MECHANICAL ENGINEERING, 2010 |
ADVANCES IN MECHANICAL ENGINEERING, 2010 |
2010 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hitoshi Fujimoto, Yosuke Oku, Tomohiro Ogihara, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Yosuke Oku, Tomohiro Ogihara, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Yosuke Oku, Tomohiro Ogihara, Takayuki Hama, Hirohiko Takuda |
An experimental study of the deformation behavior of water droplets impinging obliquely on a hot substrate |
An experimental study of the deformation behavior of water droplets impinging obliquely on a hot substrate |
An experimental study of the deformation behavior of water droplets impinging obliquely on a hot substrate |
Journal of Flow Visualization and Image Processing, 17, 2, 113-126 |
Journal of Flow Visualization and Image Processing, 17, 2, 113-126 |
Journal of Flow Visualization and Image Processing, 17, 2, 113-126 |
2010 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
濵 孝之 |
濵 孝之 |
|
鉄鋼材料の加工プロセスシミュレーション |
鉄鋼材料の加工プロセスシミュレーション |
|
ふぇらむ, 15, 9, 573-574 |
ふぇらむ, 15, 9, 573-574 |
, 15, 9, 573-574 |
2010 |
Refereed |
Japanese |
Research paper(other academic) |
Disclose to all |
Hirohiko Takuda, Keisuke Ozawa, Takayuki Hama, Tohru Yoshida, Jun Nitta |
Hirohiko Takuda, Keisuke Ozawa, Takayuki Hama, Tohru Yoshida, Jun Nitta |
Hirohiko Takuda, Keisuke Ozawa, Takayuki Hama, Tohru Yoshida, Jun Nitta |
Forming Limit Prediction in Bore Expansion by Combination of Finite Element Simulation and Ductile Fracture Criterion |
Forming Limit Prediction in Bore Expansion by Combination of Finite Element Simulation and Ductile Fracture Criterion |
Forming Limit Prediction in Bore Expansion by Combination of Finite Element Simulation and Ductile Fracture Criterion |
MATERIALS TRANSACTIONS, 50, 8, 1930-1934 |
MATERIALS TRANSACTIONS, 50, 8, 1930-1934 |
MATERIALS TRANSACTIONS, 50, 8, 1930-1934 |
2009/08 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Keita Matsushima, Toru Kitajima, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Keita Matsushima, Toru Kitajima, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Keita Matsushima, Toru Kitajima, Hitoshi Fujimoto, Hirohiko Takuda |
Correlation between Sheet Deformation and Hydraulic Pressure Variation during Sheet Hydroforming |
Correlation between Sheet Deformation and Hydraulic Pressure Variation during Sheet Hydroforming |
Correlation between Sheet Deformation and Hydraulic Pressure Variation during Sheet Hydroforming |
ISIJ INTERNATIONAL, 49, 11, 1736-1743 |
ISIJ INTERNATIONAL, 49, 11, 1736-1743 |
ISIJ INTERNATIONAL, 49, 11, 1736-1743 |
2009 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda |
Outflow characteristics of a pressure medium during sheet hydroforming |
Outflow characteristics of a pressure medium during sheet hydroforming |
Outflow characteristics of a pressure medium during sheet hydroforming |
ISIJ International, 49, 2, 239-246 |
ISIJ International, 49, 2, 239-246 |
ISIJ International, 49, 2, 239-246 |
2009 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takuda, H, Hama, T, Nishida, K, Yoshida, T, Nitta, J |
Takuda, H, Hama, T, Nishida, K, Yoshida, T, Nitta, J |
Takuda, H, Hama, T, Nishida, K, Yoshida, T, Nitta, J |
Prediction of forming limit in stretch flanging by finite element simulation combined with ductile fracture criterion |
Prediction of forming limit in stretch flanging by finite element simulation combined with ductile fracture criterion |
Prediction of forming limit in stretch flanging by finite element simulation combined with ductile fracture criterion |
Computer Methods in Materials Science, 9-1 (2009), 137-142. |
Computer Methods in Materials Science, 9-1 (2009), 137-142. |
Computer Methods in Materials Science, 9-1 (2009), 137-142. |
2009 |
Refereed |
English |
|
Disclose to all |
宅田裕彦, 小澤慶祐, 浜孝之, 吉田亨, 新田淳 |
宅田裕彦, 小澤慶祐, 浜孝之, 吉田亨, 新田淳 |
|
延性破壊条件式と有限要素解析による穴広げ成形限界予測 |
延性破壊条件式と有限要素解析による穴広げ成形限界予測 |
|
塑性と加工, 49, 572, 886-890 |
塑性と加工, 49, 572, 886-890 |
, 49, 572, 886-890 |
2008/09/25 |
Refereed |
Japanese |
|
Disclose to all |
Takayuki Hama, Takashi Nagata, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda |
Takayuki Hama, Takashi Nagata, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda |
Takayuki Hama, Takashi Nagata, Cristian Teodosiu, Akitake Makinouchi, Hirohiko Takuda |
Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces |
Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces |
Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 50, 2, 175-192 |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 50, 2, 175-192 |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 50, 2, 175-192 |
2008/02 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Masato Takamura, Akitake Makinouchi, Cristian Teodosiu, Hirohiko Takuda |
Takayuki Hama, Masato Takamura, Akitake Makinouchi, Cristian Teodosiu, Hirohiko Takuda |
Takayuki Hama, Masato Takamura, Akitake Makinouchi, Cristian Teodosiu, Hirohiko Takuda |
Effect of tool-modeling accuracy on square-cup deep-drawing simulation (Reprinted from JSTP, vol 48, pg 61-65, 2007) |
Effect of tool-modeling accuracy on square-cup deep-drawing simulation (Reprinted from JSTP, vol 48, pg 61-65, 2007) |
Effect of tool-modeling accuracy on square-cup deep-drawing simulation (Reprinted from JSTP, vol 48, pg 61-65, 2007) |
MATERIALS TRANSACTIONS, 49, 2, 278-283 |
MATERIALS TRANSACTIONS, 49, 2, 278-283 |
MATERIALS TRANSACTIONS, 49, 2, 278-283 |
2008/02 |
Refereed |
English |
|
Disclose to all |
Hama, T, Takamura, M, Makinouchi, A, Teodosiu, C, Takuda H |
Hama, T, Takamura, M, Makinouchi, A, Teodosiu, C, Takuda H |
Hama, T, Takamura, M, Makinouchi, A, Teodosiu, C, Takuda H |
Formulation of Contact Problems in Sheet Metal Forming Simulation Using Local Interpolation for Tool Surfaces |
Formulation of Contact Problems in Sheet Metal Forming Simulation Using Local Interpolation for Tool Surfaces |
Formulation of Contact Problems in Sheet Metal Forming Simulation Using Local Interpolation for Tool Surfaces |
Journal of Computational Science and Technology, 2, 1, 68-80 |
Journal of Computational Science and Technology, 2, 1, 68-80 |
Journal of Computational Science and Technology, 2, 1, 68-80 |
2008 |
Refereed |
English |
|
Disclose to all |
Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda |
Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda |
Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda |
Numerical simulation of two droplets impinging successively on a hot solid in the film boiling regime |
Numerical simulation of two droplets impinging successively on a hot solid in the film boiling regime |
Numerical simulation of two droplets impinging successively on a hot solid in the film boiling regime |
ISIJ INTERNATIONAL, 48, 5, 611-615 |
ISIJ INTERNATIONAL, 48, 5, 611-615 |
ISIJ INTERNATIONAL, 48, 5, 611-615 |
2008 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hitoshi Fujimoto, Daisuke Ohno, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Daisuke Ohno, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Daisuke Ohno, Takayuki Hama, Hirohiko Takuda |
Numerical study of a planar liquid jet impinging on a solid substrate |
Numerical study of a planar liquid jet impinging on a solid substrate |
Numerical study of a planar liquid jet impinging on a solid substrate |
ISIJ INTERNATIONAL, 48, 5, 603-610 |
ISIJ INTERNATIONAL, 48, 5, 603-610 |
ISIJ INTERNATIONAL, 48, 5, 603-610 |
2008 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Takayuki Hama, Keinosuke Iguchi, Hirotoshi Hishida, Hirohiko Takuda |
Takayuki Hama, Keinosuke Iguchi, Hirotoshi Hishida, Hirohiko Takuda |
Takayuki Hama, Keinosuke Iguchi, Hirotoshi Hishida, Hirohiko Takuda |
ROLL FORMING SIMULATIONS OF A STEEL SHEET USING VARIOUS FINITE ELEMENT METHOD CODES |
ROLL FORMING SIMULATIONS OF A STEEL SHEET USING VARIOUS FINITE ELEMENT METHOD CODES |
ROLL FORMING SIMULATIONS OF A STEEL SHEET USING VARIOUS FINITE ELEMENT METHOD CODES |
STEEL RESEARCH INTERNATIONAL, 587-594 |
STEEL RESEARCH INTERNATIONAL, 587-594 |
STEEL RESEARCH INTERNATIONAL, 587-594 |
2008 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Mihaela Banu, Takayuki Hama, Jose Luis Alves, Ovidiu Naidim |
Mihaela Banu, Takayuki Hama, Jose Luis Alves, Ovidiu Naidim |
Mihaela Banu, Takayuki Hama, Jose Luis Alves, Ovidiu Naidim |
NUMERICAL PREDICTION OF THE STRESS FIELDS IN A BENDING UNBENDING FORMING STAGE USING STAMP3D AND DD3IMP |
NUMERICAL PREDICTION OF THE STRESS FIELDS IN A BENDING UNBENDING FORMING STAGE USING STAMP3D AND DD3IMP |
NUMERICAL PREDICTION OF THE STRESS FIELDS IN A BENDING UNBENDING FORMING STAGE USING STAMP3D AND DD3IMP |
STEEL RESEARCH INTERNATIONAL, 186-193 |
STEEL RESEARCH INTERNATIONAL, 186-193 |
STEEL RESEARCH INTERNATIONAL, 186-193 |
2008 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hirohiko Takuda, Takayuki Hama, Tohru Yoshida, Jun Nitta |
Hirohiko Takuda, Takayuki Hama, Tohru Yoshida, Jun Nitta |
Hirohiko Takuda, Takayuki Hama, Tohru Yoshida, Jun Nitta |
FORMING LIMIT PREDICTION OF HIGH-STRENGTH STEEL SHEETS IN STRETCH FORMING |
FORMING LIMIT PREDICTION OF HIGH-STRENGTH STEEL SHEETS IN STRETCH FORMING |
FORMING LIMIT PREDICTION OF HIGH-STRENGTH STEEL SHEETS IN STRETCH FORMING |
STEEL RESEARCH INTERNATIONAL, 19-23 |
STEEL RESEARCH INTERNATIONAL, 19-23 |
STEEL RESEARCH INTERNATIONAL, 19-23 |
2008 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
Hitoshi Fujimoto, Yu Shiotani, Albert Y. Tong, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Yu Shiotani, Albert Y. Tong, Takayuki Hama, Hirohiko Takuda |
Hitoshi Fujimoto, Yu Shiotani, Albert Y. Tong, Takayuki Hama, Hirohiko Takuda |
Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate |
Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate |
Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate |
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 33, 3, 317-332 |
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 33, 3, 317-332 |
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 33, 3, 317-332 |
2007/03 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
浜孝之, 高村正人, 牧野内昭武, TEODOSIU Cristian, 宅田裕彦 |
浜孝之, 高村正人, 牧野内昭武, TEODOSIU Cristian, 宅田裕彦 |
|
工具モデル精度の角筒絞り成形解析に及ぼす影響 |
工具モデル精度の角筒絞り成形解析に及ぼす影響 |
|
塑性と加工, 48, 552, 61-65 |
塑性と加工, 48, 552, 61-65 |
, 48, 552, 61-65 |
2007/01/25 |
Refereed |
Japanese |
|
Disclose to all |
Takayuki Hama, Tomohiro Hatakeyama, Motoo Asakawa, Hiroyuki Amino, Akitake Makinouchi, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Tomohiro Hatakeyama, Motoo Asakawa, Hiroyuki Amino, Akitake Makinouchi, Hitoshi Fujimoto, Hirohiko Takuda |
Takayuki Hama, Tomohiro Hatakeyama, Motoo Asakawa, Hiroyuki Amino, Akitake Makinouchi, Hitoshi Fujimoto, Hirohiko Takuda |
Finite-element simulation of the elliptical cup deep drawing process by sheet hydroforming |
Finite-element simulation of the elliptical cup deep drawing process by sheet hydroforming |
Finite-element simulation of the elliptical cup deep drawing process by sheet hydroforming |
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 43, 3, 234-246 |
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 43, 3, 234-246 |
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 43, 3, 234-246 |
2007/01 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
T. Hama, M. Takamura, C. Teodosiu, A. Makinouchi, H. Takuda |
T. Hama, M. Takamura, C. Teodosiu, A. Makinouchi, H. Takuda |
T. Hama, M. Takamura, C. Teodosiu, A. Makinouchi, H. Takuda |
Effect of tool modeling accuracy on sheet metal forming simulation |
Effect of tool modeling accuracy on sheet metal forming simulation |
Effect of tool modeling accuracy on sheet metal forming simulation |
Key Engineering Materials, 340-341 I, 743-748 |
Key Engineering Materials, 340-341 I, 743-748 |
Key Engineering Materials, 340-341 I, 743-748 |
2007 |
Refereed |
English |
|
Disclose to all |
S. Kimura, J. Koyanagi, T. Hama, H. Kawada |
S. Kimura, J. Koyanagi, T. Hama, H. Kawada |
S. Kimura, J. Koyanagi, T. Hama, H. Kawada |
Evaluation of the interfacial properties in polymer matrix composite: Experiments and elasto-plastic shear-lag analysis |
Evaluation of the interfacial properties in polymer matrix composite: Experiments and elasto-plastic shear-lag analysis |
Evaluation of the interfacial properties in polymer matrix composite: Experiments and elasto-plastic shear-lag analysis |
Key Engineering Materials, 340-341 I, 167-172 |
Key Engineering Materials, 340-341 I, 167-172 |
Key Engineering Materials, 340-341 I, 167-172 |
2007 |
Refereed |
English |
|
Disclose to all |
S. Kimura, J. Koyanagi, T. Hama, H. Kawada |
S. Kimura, J. Koyanagi, T. Hama, H. Kawada |
S. Kimura, J. Koyanagi, T. Hama, H. Kawada |
An improved shear-lag model for a single fiber composite with a ductile matrix |
An improved shear-lag model for a single fiber composite with a ductile matrix |
An improved shear-lag model for a single fiber composite with a ductile matrix |
Key Engineering Materials, 334-335 I, 333-336 |
Key Engineering Materials, 334-335 I, 333-336 |
Key Engineering Materials, 334-335 I, 333-336 |
2007 |
Refereed |
English |
|
Disclose to all |
Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda |
Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda |
Tomoki Minamikawa, Hitoshi Fujimoto, Takayuki Hama, Hirohiko Takuda |
Numerical study of the collision dynamics and heat transfer of water droplets impinging on a hot solid |
Numerical study of the collision dynamics and heat transfer of water droplets impinging on a hot solid |
Numerical study of the collision dynamics and heat transfer of water droplets impinging on a hot solid |
ISIJ INTERNATIONAL, 47, 1, 131-137 |
ISIJ INTERNATIONAL, 47, 1, 131-137 |
ISIJ INTERNATIONAL, 47, 1, 131-137 |
2007 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
T. Hama, T. Ohkubo, K. Kurisu, H. Fujimoto, H. Takuda |
T. Hama, T. Ohkubo, K. Kurisu, H. Fujimoto, H. Takuda |
T. Hama, T. Ohkubo, K. Kurisu, H. Fujimoto, H. Takuda |
Formability of tube hydroforming under various loading paths |
Formability of tube hydroforming under various loading paths |
Formability of tube hydroforming under various loading paths |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 177, 1-3, 676-679 |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 177, 1-3, 676-679 |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 177, 1-3, 676-679 |
2006/07 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
M Banu, M Takamura, T Hama, O Naidim, C Teodosiu, A Makinouchi |
M Banu, M Takamura, T Hama, O Naidim, C Teodosiu, A Makinouchi |
M Banu, M Takamura, T Hama, O Naidim, C Teodosiu, A Makinouchi |
Simulation of springback and wrinkling in stamping of a dual phase steel rail-shaped part |
Simulation of springback and wrinkling in stamping of a dual phase steel rail-shaped part |
Simulation of springback and wrinkling in stamping of a dual phase steel rail-shaped part |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 173, 2, 178-184 |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 173, 2, 178-184 |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 173, 2, 178-184 |
2006/04 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
T. Hama, M. Takamura, A. Makinouchi, C. Teodosiu, H. Takuda |
T. Hama, M. Takamura, A. Makinouchi, C. Teodosiu, H. Takuda |
|
Formulation of contact problems in sheet metal forming simulation using local interpolation for tool surfaces |
Formulation of contact problems in sheet metal forming simulation using local interpolation for tool surfaces |
|
Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 72, 2, 216-223 |
Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 72, 2, 216-223 |
, 72, 2, 216-223 |
2006 |
Refereed |
Japanese |
|
Disclose to all |
柳橋 卓, 浜 孝之, 小野田 雄介, 浅川 基男 |
柳橋 卓, 浜 孝之, 小野田 雄介, 浅川 基男 |
|
2ロール矯正における曲げの塑性率と繰り返し回数が真直性に与える影響 : 棒線における矯正と残留応力の研究 第3報 |
2ロール矯正における曲げの塑性率と繰り返し回数が真直性に与える影響 : 棒線における矯正と残留応力の研究 第3報 |
|
塑性と加工 = JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY, 46, 537, 972-976 |
塑性と加工 = JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY, 46, 537, 972-976 |
, 46, 537, 972-976 |
2005/10/25 |
Refereed |
Japanese |
|
Disclose to all |
T Hama, M Asakawa, M Takamura, A Makinouchi, C Teodosiu |
T Hama, M Asakawa, M Takamura, A Makinouchi, C Teodosiu |
T Hama, M Asakawa, M Takamura, A Makinouchi, C Teodosiu |
Effect of force correction algorithm arising from change of tool normal on sheet metal forming simulation |
Effect of force correction algorithm arising from change of tool normal on sheet metal forming simulation |
Effect of force correction algorithm arising from change of tool normal on sheet metal forming simulation |
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 48, 4, 329-334 |
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 48, 4, 329-334 |
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 48, 4, 329-334 |
2005/10 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
T Hama, M Asakawa, A Makinouchi |
T Hama, M Asakawa, A Makinouchi |
T Hama, M Asakawa, A Makinouchi |
Investigation of factors which cause breakage during the hydroforming of an automotive part |
Investigation of factors which cause breakage during the hydroforming of an automotive part |
Investigation of factors which cause breakage during the hydroforming of an automotive part |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 150, 1-2, 10-17 |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 150, 1-2, 10-17 |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 150, 1-2, 10-17 |
2004/07 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
T Hama, M Asakawa, H Fukiharu, A Makinouchi |
T Hama, M Asakawa, H Fukiharu, A Makinouchi |
T Hama, M Asakawa, H Fukiharu, A Makinouchi |
Simulation of hammering hydroforming by static explicit FEM |
Simulation of hammering hydroforming by static explicit FEM |
Simulation of hammering hydroforming by static explicit FEM |
ISIJ INTERNATIONAL, 44, 1, 123-128 |
ISIJ INTERNATIONAL, 44, 1, 123-128 |
ISIJ INTERNATIONAL, 44, 1, 123-128 |
2004 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
T Hama, M Asakawa, S Fuchizawa, A Makinouchi |
T Hama, M Asakawa, S Fuchizawa, A Makinouchi |
T Hama, M Asakawa, S Fuchizawa, A Makinouchi |
Analysis of hydrostatic tube bulging with cylindrical die using static explicit FEM |
Analysis of hydrostatic tube bulging with cylindrical die using static explicit FEM |
Analysis of hydrostatic tube bulging with cylindrical die using static explicit FEM |
MATERIALS TRANSACTIONS, 44, 5, 940-945 |
MATERIALS TRANSACTIONS, 44, 5, 940-945 |
MATERIALS TRANSACTIONS, 44, 5, 940-945 |
2003/05 |
Refereed |
English |
Research paper(scientific journal) |
Disclose to all |
浅川基男, 桑山勲, 浜孝之, 細田寛之, 藤城良夫, 林郁彦 |
浅川基男, 桑山勲, 浜孝之, 細田寛之, 藤城良夫, 林郁彦 |
|
各種製品寸法・材料強度に対応した金型設計法 : 高張力鋼板を用いた箱形断面成形の研究 : 第2報 |
各種製品寸法・材料強度に対応した金型設計法 : 高張力鋼板を用いた箱形断面成形の研究 : 第2報 |
|
塑性と加工, 43, 502, 1093-1097 |
塑性と加工, 43, 502, 1093-1097 |
, 43, 502, 1093-1097 |
2002/11/25 |
Refereed |
Japanese |
|
Disclose to all |
浜孝之, 浅川基男, 淵沢定克, 牧野内昭武 |
浜孝之, 浅川基男, 淵沢定克, 牧野内昭武 |
|
管材の型張出し成形解析と実験結果との比較 : 静的陽解法弾塑性FEMによるハイドロフォーミング成形特性の研究 第1報 |
管材の型張出し成形解析と実験結果との比較 : 静的陽解法弾塑性FEMによるハイドロフォーミング成形特性の研究 第1報 |
|
塑性と加工, 43, 492, 35-39 |
塑性と加工, 43, 492, 35-39 |
, 43, 492, 35-39 |
2002/01/25 |
Refereed |
Japanese |
|
Disclose to all |
浜孝之, 浅川基男, 牧野内昭武 |
浜孝之, 浅川基男, 牧野内昭武 |
|
ハイドロフォーミングのシミュレーション |
ハイドロフォーミングのシミュレーション |
|
プレス技術, 40, 5, 46-50 |
プレス技術, 40, 5, 46-50 |
, 40, 5, 46-50 |
2002 |
|
Japanese |
Research paper(other academic) |
Disclose to all |
浅川基男, 阿部琢磨, 錦織智, 浜孝之, 桑山勲, 藤城良夫, 林郁彦 |
浅川基男, 阿部琢磨, 錦織智, 浜孝之, 桑山勲, 藤城良夫, 林郁彦 |
|
自動車用バンパー補強部材のプレス成形 -高張力鋼板を用いた箱形断面成形の研究:第1報- |
自動車用バンパー補強部材のプレス成形 -高張力鋼板を用いた箱形断面成形の研究:第1報- |
|
塑性と加工, 42, 486, 720-724 |
塑性と加工, 42, 486, 720-724 |
, 42, 486, 720-724 |
2001/07/25 |
Refereed |
Japanese |
|
Disclose to all |
浜孝之 |
浜孝之 |
|
板成形シミュレーションに及ぼす各種解析条件の影響 (解説) |
板成形シミュレーションに及ぼす各種解析条件の影響 (解説) |
|
素形材,54-4(2013),45-50. |
素形材,54-4(2013),45-50. |
|
|
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
浜孝之 |
浜孝之 |
|
鉄鋼材料の加工プロセスシミュレーション (解説) |
鉄鋼材料の加工プロセスシミュレーション (解説) |
|
ふぇらむ,15-9(2010),573. |
ふぇらむ,15-9(2010),573. |
|
|
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
浜孝之, 牧野内昭武 |
浜孝之, 牧野内昭武 |
|
チューブハイドロフォーミングのシミュレーションⅠ (解説) |
チューブハイドロフォーミングのシミュレーションⅠ (解説) |
|
塑性と加工,46-529(2005-2),26-31. |
塑性と加工,46-529(2005-2),26-31. |
|
|
|
Japanese |
Research paper(scientific journal) |
Disclose to all |
錦古里洋介, 浅川基男, 鈴木得功, 柳橋卓, 浜孝之 |
錦古里洋介, 浅川基男, 鈴木得功, 柳橋卓, 浜孝之 |
|
2ロール矯正によるプロフィールと残留応力の理論的考察-棒線における矯正と残留応力の研究 第2報- |
2ロール矯正によるプロフィールと残留応力の理論的考察-棒線における矯正と残留応力の研究 第2報- |
|
塑性と加工,42-491(2001-12), 62-66. |
塑性と加工,42-491(2001-12), 62-66. |
|
|
Refereed |
Japanese |
|
Disclose to all |